Ultimate Support Systems TS-70B User Manual
warranty registration
Visit www.ultimatesupport.com for a quick and convenient process for registering your new Ultimate Support product. Warranty
Registration and Proof of Purchase are required for warranty fulfilment. Full Limited Lifetime Warranty and Ultimate Protection
Plus Premium Service and Support Plan details are available online under Music Gear & Instrument Stands / Customer Support.
Product Manual
for Ultimate Suppor t
SPEAKER
STAND
TS-70B
ITEM #137 12
800.525.5628 . www.ultimatesupport.com . Copyright 2009, Ultimate Support Systems . All Rights Reserved
4
Revision 6, 03.21.09 . Product Manual Item #13712M
GET
set-up
special
instructions accessories
LASTING
VALUE!
Safe & Secure
Supports more weight
than other lightweight
stands; locking pin
for absolute speaker
security.
Truly Portable
Quickly folds into an
ultra-slim, lightweight
unit.
Versatile & Reliable
Includes integrated
socket adapter and foot
caps that won’t fall off.
Limited Lifetime
Warranty
Constructed of the finest
materials and backed
by our award-winning
customer support (see
Warranty Information on
pg. 4 for details).
STEP 1
1
2
3
4
5
Loosen leg fitting hand knob.
STEP 2
Slide leg fitting down to maximum
diameter of leg spread (leg braces
should be parallel to the floor. Tighten
hand knob.
CAUTION: Do not over tighten
hand knob; usually two turns
is enough. Also, do not store
in tightly locked position.
STEP 3
Remove safety pin from slot on upper
telescoping tube. Loosen hand knob
on telescoping collar and raise center
tube 6-10”. Retighten hand knob.
STEP 4
Select the correct size socket adapter.
Put speaker cabinet on top. Slowly
loosen the hand knob and raise the
cabinet to desired height. Tighten
hand knob. Insert safety pin into slot
on the telescoping tube.
STEP 5
To lower speaker, remove the safety
pin from the slot. Slowly loosen the
hand knob. Use caution and slowly
lower the upper telescoping tube.
Tighten hand knob and remove
speaker cabinet.
1. Occasionally clean the stand
with a damp cloth or non-abrasive
cleaner. Do not lubricate or use
silicone spray on the center tube.
2. When loading the tripod, ONLY
add the speaker when the tripod is
in a fully upright position (all legs on
the floor).
3. Do not drag the Tripod Speaker
Stand while it is loaded; this could
cause breakage of the fittings and
result in damage to the stand.
4. When supporting equipment,
check that the telescoping collar is
securely tightened and the safety
pin is inserted into slot on upper
telescoping tube.
5. Always release the collar with
caution and stand clear of load.
Speaker Stand Mounting Bracket
BMB-200K (#10766)
External bracket securely mounts any
speaker cabinet with a flat bottom on an
Ultimate Support speaker stand.
Speaker Stand Socket
Mounting Bracket
TSM-150MK (#13421)
TSM-138MK (#13425)
Internal metal bracket securely mounts any
speaker cabinet with a flat bottom on an
Ultimate Support speaker stand.
Zippered Tote Bags
Heavy-duty, padded, zippered Tote Bags
BAG-90 (#15691)
Holds one TS-70B Speaker Stand
10.5” x 49.5” (267 mm x 1257 mm)
BAG-90D (#15693)
Holds two TS-70B Speaker Stands
14.5” x 49.5” (368 mm x 1257 mm)
2
3
Loading...