Ultimate Support Systems MC-125 User Manual

warranty registration

Visit www.ultimatesupport.com for a quick and convenient process for registering your new
Ultimate Support product. Warranty Registration and Proof of Purchase are required for warranty
fulfilment. Full Limited Lifetime Warranty and Ultimate Protection Plus Premium Service and
Support Plan details are available online under Music Gear & Instrument Stands / Customer Support.

Product Manual

for Ultimate Suppor t

MC-125

ITEM # 16124

800.525.5628 . www.ultimatesupport.com . Copyright 2009, Ultimate Support Systems . All Rights Reserved

4

Revision 5, 07.27.09 . Product Manual Item #MC-125-M

AS SEMBLY INSTRUCTIONS

USER INS T R UCT IONS

Congratulations
on your purchase!

Highly Mobile – With innovative,

inline skate - style wheels, the

MC -125 glides smoothly along

nearly any flat surface with very

lit tle effort.

Super Stable Base – The MC-125

offers a large diameter base with

locking, rollerblade-style wheels

which provide a low center of

gravity and extraordinary stability.

Highly Adjustable – The long

boom telescopes from 35” - 61”

and featu res a friction -free

clutch arm extension while the

MC-125’s height is adjustable

from 51.5” to 82.75”.

1a

Wheel
Lock

1b

2

Threaded
Base

3

Threaded
Corner

Boom
on Upright

Threaded
Caster

STEP 1a - 1b
Attaching Swivel Casters:

Put caster into “Lock”
position (1a). Screw all
three swivel casters into
the threaded corners on
the underside of the base
(1b). Securely tighten.

STEP 2
Attaching Upright Shaft:

Thread upright assembly
securely into the base (2).

STEP 3
Attaching Boom:

Thread the boom portion
of the stand onto the top
of the upright shaft (3).
Securely tighten.

1

Caster
with Lock

2

Upright
Clutch

3

Boom
Clutch

4

Boom
Adjustment
Knob

5

Counterweight

1 - Casters:

Unlock to move the stand on the smooth, rolling
casters. Lock in place (1).

2 - Height Adjustment:

Loosen the upright clutch (2) by turning
counterclockwise. Adjust to your desired height.
Tighten the clutch by turning clockwise.

3 - Boom Length Adjustment:

Loosen the clutch (3) by turning counterclockwise.
Adjust to your desired length. Tighten the clutch by
turning clockwise.

4- Boom Positioning:

The boom has 3-way adjustment: front-to-back,
up-and-down, and rotationally. Simply loosen the
control knob (4), make all three adjustments and
tighten snugly.

5- Counterweight & Boom Extension:

For optimum balance, the boom counterweight
can be repositioned. Simply unscrew the two halves
of the counterweight, position along the boom
portion of the stand and tighten. Set boom extension
to vertical or hanging straight down (see figure 4,
page 2). Securely tighten. Attach microphone.

4

Boom
Extension

STEP 4
Attaching Boom Extension:

Screw the boom extension
onto the threaded end of the
main boom portion of
the stand (4).

6

Cable
Management Clip

6 - Cable Management:

Easy-to-use cable management clips are
conveniently located in two places along the boom
and on the upright portion of the stand. Simply
press your mic cable into the clip for a clean look.
Gently pull the cable out to remove.

32