Ultimate Support TS-90B, TS-99B Users Manual
warranty information
Ultimate Support Systems offers a Limited Lifetime Warranty on TS-90 SERIES.
For Full Details, Exclusions and Limitations as well as information on Obtaining Warranty
Service, please see full warranty details available online at www.ultimatesupport.com.
To purchase the Ultimate Protection Plus Premium Service and Support Plan,
please visit www.ultimatesupport.com or call customer support at 800 - 525 - 56 28
for more information.
warranty registration
Visit www.ultimatesupport.com for a quick and convenient process for registering your
new Ultimate Support product. Warranty Registration and Proof of Purchase are required
for warranty fulfilment. Full Limited Lifetime Warranty and Ultimate Protection Plus
Premium Service and Support Plan details are available online.
Product Manual
for Ultimate Support
TS-90 SERIES
TELELOCK
STANDARD
SPEAKER STAND
TS - 90B ITEM # 139 0 8
TALL
SPEAKER STAND
TS - 99B ITEM # 139 1 0
™
970.776.1920 . www.ultimatesupport.com . Copyright 2009, Ultimate Support Systems . All Rights Reserved
4
TALL LEVELING LEG
SPEAKER STAND
TS- 99BL ITEM # 136 4 2
Revision 6, 03.21.09 . Product Manual Item #SPK90-M
set-up
special
instructions
accessories
1
2
3
4
5
6
STEP 1
Open leg fitting lock lever.
STEP 2
Turn stand upside down and pivot legs so Ultimate Support label
faces you.
STEP 3
Turn stand upright and slide leg fitting to adjust diameter of leg
spread. Leg braces should be parallel to floor for maximum stability.
Close lock lever.
STEP 4
The built-in adapter fits both 1-1/2” or 1-3/8” internal diameter speaker
sockets. Use the lower position for 1-1/2”. For 1-3/8” sockets, depress
push buttons and raise adapter until it locks in raised
STEP 5
Line up arrow TeleLock® collar with “RAISE”. Then raise center tube
6-10”. Put speaker cabinet on top of the stand and raise the cabinet
to desired height. Set to “LOCK” position.
STEP 6
To lower speakers, SLOWLY rotate arrow on TeleLock collar to
“LOWER” position until speaker starts to lower. To slow descent,
turn collar toward the “RAISE” position. When ready to remove the
speaker, rotate collar to “LOCKED” position.
On TS-99BL Leveling Leg Stand, 3rd leg adjusts to level stand on uneven
surfaces. Untighten leg telescoping collar, lengthen leg and retighten knob.
position.
1. Occasionally clean the stand with a damp
cloth or non-abrasive cleaner.
2. When loading the stand, ONLY add the
speaker when the stand is in a fully upright
position (all legs on the floor).
3. Do not drag the stand while it is loaded;
this could break the fittings and result in
damage to the stand which will not be
covered under warranty.
4. Check that the leg collar is securely locked
when supporting equipment.
5. Always release the TeleLock collar with
caution and stand clear of the load.
6. The stand is equipped with a tube lock
which prevents accidentally pulling out the
center tube.
lighting tree
Turn a Tall TS-99B, or TS-99BL Speaker
Stand into a Lighting Tree.
For a Single-Tier Lighting Tree add:
LTB-48B (#14107)
48” Lighting Crossbar
For a Two-Tier Lighting Tree add:
LTV-24B (#14108) 24” Vertical Extension
LTB-48B (#14107) 48” Lighting Crossbar
LTB-24B (#14106) 24” Lighting Crossbar Pair
2
Speaker Stand
Mounting Bracket
BMB-200K (#10766)
External bracket securely mounts any
speaker cabinet with a flat bottom on
an Ultimate Support speaker stand.
Speaker Stand Socket
Mounting Bracket
TSM-150MK (#13421)
TSM-138MK (#13425)
Internal metal bracket securely mounts
any speaker cabinet with a flat bottom
on an Ultimate Support speaker stand.
Zippered Tote Bags
Heavy-duty, padded, zippered
Tote Bags
BAG-90 (#15691)
Holds one TS-90B Speaker Stand.
10.5” x 49.5” (267 mm x 1257 mm)
BAG-90D (#15693)
Holds two TS-90B Speaker Stands.
14.5” x 49.5” (368 mm x 1257 mm)
BAG-99 (#15692)
Holds one TS-99B/TS-99BL Speaker Stand.
10.5” x 60.5” (267 mm x 1537 mm)
BAG-99D (#15694)
Holds two TS-99B/TS-99BL Speaker Stands.
14.5” x 60.5” (368 mm x 1537 mm)
3
Loading...