
warranty information
Ultimate Support Systems offers a Limited Lifetime Warranty on Live Mic Stand Series.
For Full Details, Exclusions and Limitations as well as information on Obtaining Warranty
Service, please see full warranty details available online at www.ultimatesupport.com.
To purchase the Ultimate Protection Plus Premium Service and Support Plan,
please visit www.ultimatesupport.com or call customer support at 800 - 525- 5628
for more information.
warranty registration
Visit www.ultimatesupport.com for a quick and convenient process for registering your
new Ultimate Support product. Warranty Registration and Proof of Purchase are required for
warranty fulfilment. Full Limited Lifetime Warranty and Ultimate Protection Plus Premium
Service and Support Plan details are available online.
Product Manual
for Ultimate Support
LIVE MIC
STAND SERIES
LIVE-T
ITEM #1 7204
LIVE-ST
IT E M # 17205
LIVE-SB
IT E M # 17206
Stacked
970.776.1920 . www.ultimatesupport.com . Copyright 2009, Ultimate Support Systems . All Rights Reserved
4
Folded
Revision 1, 03.18.09 . Product Manual Item #LIVE-M

set-up features
1 2
Legs Lock
in Place
BA SE LO CK
STEP 1
Tripod Base: Fold legs down and turn base
lock on bottom of stand to locked position.
Weighted Base: Shaft screws into
weighted base.
Weighted Base Design: Allows any Live
weighted base stand shaft to be used with
any Live weighted base.
3
Optional
Custom Top
Standard
LIVE Top
STEP 2
While squeezing the trigger raise or
lower the clutch/upper shaft to your
desired height. Release the trigger and
the internal lock engages for a secure
and reliable hold.
4
Metric
MIC-Lock
LOCKED
LEG REPLACEMENT
The legs on the Live Series Mic Stands are built to be extra durable, withstanding the rigors of
everyday use. However, if a leg should get damaged, the stand is designed to be field repairable
and the legs can be replaced. Please visit www.ultimatesupport.com or call customer support
at 800-525-5628 for more details.
Same Live Weighted Base Mic Shaft
THE SHAFT OF ANY
WEIGHTED LI VE STAND
CAN BE USED WITH ANY
WEIGHTED LI VE BASE!
US Mic Lock
US
STEP 3 Universal Mic Attachment
To adjust US to metric, use tool provided or
1.5 Allen Wrench to unlock threads. Turn
US threads counter clockwise until it is
removed. US MIC-Lock will come off too.
Mic Tool or
1.5 Allen Wrench
Metric
4
US
MIC-Lock
LOCKED
STEP 4 Universal Mic Attachment
After choosing desired thread, place
microphone on universal mic attachment.
Then turn MIC-Lock counter clockwise to
lock mic in place.
CUSTOMIZABLE
OPTIONAL: Retro fit any of the NEW Custom Mic Tops onto any of the Live
Series stands with full functionality for your own unique style.
2 3