With included
T-Stand adapter.
HyperStation QR
in standing position.
Mounted on microphone
stand (5/8" thread).
Product Manual
HyperStation QR
LPT-1000 QR, 17510
HyperMount QR
HYM-100 QR, 17511
HyperStation QR
in folded position.
LIMITED LIFETIME WARRANTY
800.525.5628 . www.ultimatesupport.com . Copyright 2013, Ultimate Support Systems . All Rights Reserved
HyperStation QR Instructions
1.
1. Loosen both knobs
3.
2.
2. While holding base, move stand into an
upright position.
4.
3. Tighten base knob.
5.
5. Loosen small arm knobs and adjust the arms to
desired length.
4. Swing arms around to the front and tighten upper
knob when arms are in the desired angle.
6.
6. Adjust back bumper to desired angle. Angle will
control the amount the screen tilts back.
Laptop Stand Instructions (Con.)
7.
7. Place computer into the support arms.
9.
8.
8. Loosen front clamp and front bumper to
secure laptop.
10.
9. While holding second tier at an angle, place into
any of the five slots (front or back).
10. Move the cable management clips to desired slots.
T-Stand Adapter Instructions (HyperStation QR & HyperMount QR)
1.
1. Loosen Knob, adjust rubber front foot down, while
clamp is facing up, and tighten knob.
3.
2.
2. Pull down on QuickRelease post to disengage
support arms (for HyperStation QR).
4.
3. Place included T-Stand Adapter into open post.
5.
5. Loosen knob and clamp laptop into place, then
tighten knob.
4. Place laptop into position.
Mic Stand Instructions (HyperStation QR & HyperMount QR)
1.
1. Put QuickRelease bottom piece onto top of mic
stand (5/8" thread).
3.
2.
2. Pull down on QuickRelease post to disengage
support arms (for HyperStation QR).
4.
3. Pull down on QuickRelease bottom piece and
place arms on top of mic stand, then release
QuickRelease bottom piece to lock stand in place.
5.
5. Loosen knob and clamp laptop into place, then
tighten knob.
4. Place laptop into position.
AX-48 Pro Laptop Mount Instruction (HyperStation QR & HyperMount QR)
1.
1. Screw QuickRelease bottom piece onto top of
AX-48 Pro keyboard stand (must have optional
AX-48TA Thread Adapter) .
3.
2.
2. Pull down on QuickRelease post to disengage
support arms (for HyperStation QR).
4.
3. Pull down on QuickRelease bottom piece and
place arms on top of mic stand, then release
QuickRelease bottom piece to lock stand in place
5.
5. Loosen knob and clamp laptop into place, then
tighten knob.
4. Place laptop into position.
HyperStation QR LPT-1000 QR, 17510
The HyperStation QR is a dynamic laptop stand for the working DJ and traveling
musician. The HyperStation QR features angle-adjustable telescoping support
arms that support laptops, small mixers, groove production electronics, drum
pad controllers, and more and has a height-adjustable second tier. Mobile music
production demands both portability and durability and the HyperStation QR
delivers on both accounts. It folds down flat as one piece, fitting into just about
any gig bag or backpack while being far more durable than typical wire frame
laptop stands.
HyperMount QR HYM-100 QR, 17511
The HyperMount QR is a dynamic laptop stand that mounts to any 5/8" threaded
stand – such as a microphone stand or an Ultimate Support APEX AX-48 Pro
keyboard stand – but also sits on a desktop with the included T-stand adapter.
The HyperMount QR features angle-adjustable telescoping support arms that
support laptops, small mixers, groove production electronics, drum pad
controllers, and more.
Warranty Registration
Visit www.ultimatesupport.com for a quick and convenient process
for registering your new Ultimate Support product. Warranty Registration
and Proof of Purchase are required for warranty fulfilment. Full Limited
Lifetime Warranty and Ultimate Protection Plus Premium Service and
Support Plan details are available online under Music Gear &
Instrument Stands / Customer Support.
Revision 1, 08.26.12 . Product Manual Item #HYP-100B-M
Loading...