Page 1
warranty registration
Visit www.ultimatesupport.com for a quick and convenient process for registering your new
Ultimate Support product. Warranty Registration and Proof of Purchase are required for warranty
fulfilment. Full Limited Lifetime Warranty and Ultimate Protection Plus Premium Service and
Support Plan details are available online under Music Gear & Instrument Stands / Customer Support.
Product Manual
for Ultimate Support
V-STAND® PRO
VS - 88B
IT EM #17479
800.525.5628 . www.ultimatesupport.com . Copyright 2012, Ultimate Support Systems . All Rights Reserved
4
Revision 7, 09.15.12 . Product Manual Item #Manual_17479M
Page 2
V-STAND® PRO SETUP INSTRUCTIONS HEIGHT ADJUSTMENT
STEP 2STEP 1
1. Lay stand on floor in folded position. 2. Separate both legs outward until they stop.
For safety’s sake, be sure to adjust
V-Stand® Pro height ONLY when
keyboard is not on stand.
STEP 3
3. Secure legs in open position with locking pins. 4. Pull vertical struts upward to a vertical position and
STEP 5 STEP 6
5. Move support arms into their horizontal position by
swinging them up and over the vertical struts.
STEP 4
spread them to their open position.
6. Secure arms in horizontal position with locking pins.
STEP 1
STEP 2
STEP 3
1. Pull, or rotate, locking pin collar out to release inner strut.
2. Raise or lower inner strut to desired height and push, or rotate,
locking pin collar into locking position.
3. Repeat steps 1-2 on opposite inner strut. NOTE: Make sure
height settings match on both inner struts before placing
keyboard on V-Stand® Pro!
32
Loading...