Ultimaker 3 Specification

Ultimaker 3

Specication
sheet

Specications

Printer and Printing Properties

Technology
Print head

Build volume

Filament diameter
Layer resolution
Step accuracy X, Y, Z
Print head travel speed
Material flow speed
Build plate
Material types
Nozzle diameter
Nozzle temperature
Build plate temperature
Nozzle heat up time
Build plate heat up time
Average operation noise
Nozzle replacement
Filament storage

Connectivity
Bed levelling
Camera

Fused Filament Fabrication
Dual nozzle, with lifting mechanism on 2nd nozzle.
Easily swappable printcores.
Left nozzle: 215x215x200mm
Right nozzle: 215x215x200mm
Dual material: 197x215x200mm

2.85 mm

0.4mm nozzle: 20 - 200 micron

12.5, 12.5, 2.5 micron
30 - 300 mm/s

0.40: up to 16mm³/s
Heated glass bed
PLA, PVA, ABS, CPE, Nylon

0.4mm
180 - 280 ºC
20 - 100 ºC
< 2 min
< 4 min (20 - > 60 ºC)
50 dBA
Easily swappable printcores
Open, reel holder incl guide for 2 spools of 750g
NFC system to automatically detect material type
Wifi, ethernet, stand alone via USB-drive
Active leveling
Yes

Physical dimensions

Printer outer dimensions (incl bowden tube and spoolholder)
Printer outer dimensions (excl bowden tube and spoolholder)
Nett weight
Shipping weight
Shipping box dimensions

Power requirements

Input

Output

Ambient conditions

Ambient operating conditions

Storage conditions printer

Software

Supplied software
Supported OS
File types
File transfer

34,2 x 50,5 x 58,8 cm
34,2 x 38,0 x 38,9 cm
10,6 kg
15,5 kg
39,0 x 38,0 x 56,5 cm

100 - 240V
4A, 50-60Hz
221 W max.
24 V DC, 9.2 A

15 - 32 ºC, 10 - 90% RH non condensing
Refer to material specs for optimal operating conditions
0 - 32 ºC

Cura 2 - Official Ultimaker Software
Windows, Mac, Linux
STL, OBJ, 3MF
Print direct from Cura via Network, Stand alone
USB drive printing