Ultimaker 2+ Specification
SPECIFICATION SHEET
1
PRINT HEAD CABLE
ULTIMAKER 2+
2
BOWDEN TUBE
3
PRINT HEAD
4
BUILD PLATE
5
BUILD PLATE CLAMPS
6
BUILD PLATE SCREWS
7
SD CARD SLOT
8
PUSH/ROTATE BUTTON
9
DISPLAY
FEEDER
10
11
SPOOL HOLDER
12
POWER SOCKET
13
POWER SWITCH
14
USB SOCKET
SPECIFICATIONS
PRINTER AND PRINTING PROPERTIES
Print technology
Print head
Build volume
Filament diameter
Layer resolution
X, Y, Z accuracy
Print head travel speed
Extrusion speed
Build plate
Supported materials
Nozzle diameter
Nozzle temperature
Build plate temperature
Nozzle heat up time
Build plate heat up time
Average operating sound
File transfer
Build plate leveling
Fused Filament Fabrication (FFF)
Swappable nozzle
223 x 223 x 205 mm
2.85 mm
0.25 mm nozzle: 150 to 60 micron
0.4 mm nozzle: 200 to 20 micron
0.6 mm nozzle: 400 to 20 micron
0.8 mm nozzle: 600 to 20 micron
12.5, 12.5, 5 micron
30 to 300 mm/s
0.25 mm nozzle: up to 8 mm/s
0.4 mm nozzle: up to 16 mm/s
0.6 mm nozzle: up to 23 mm/s
0.8 mm nozzle: up to 24 mm/s
Heated glass build plate (20° to 100° C)
PLA, ABS, CPE (Open Filament System)*
0.25, 0.4, 0.6, 0.8 mm
180° to 260° C
50° to 100° C
~ 1 minute
< 4 minutes
50 dBA
Standalone 3D printing from SD card
Manual, assisted leveling process
PHYSICAL DIMENSIONS
Dimensions (excluding bowden tube and spoolholder)
Dimensions (including bowden tube and spoolholder)
Nett weight
Shipping weight
POWER REQUIREMENTS
Input
Output
AMBIENT CONDITIONS
Operating ambient temperature
Nonoperating temperature
SOFTWARE
Print preparation
Supported OS
Supported file types
357 x 342 x 388 mm
493 x 342 x 588 mm
11.3 kg
18.5 kg
100 - 240 V
4 A, 50 - 60 Hz
221 W max.
24 V DC, 9.2 A
15° to 32° C
0° to 32° C
Cura - Ocial Ultimaker Software (free)
(prepared for nozzle size selection)
Mac OS X, Windows, Linux
STL, OBJ, DAE
*Ultimaker printers can be used with third party filament. However for the best printing results we recommend you
use Ultimaker PLA, ABS or CPE.
WARRANTY
The Ultimaker 2+ comes with a 1 year warranty (excluding the hot end) and free lifetime support.
Learn more about our services on the warranty page at
www.ultimaker.com/warranty
CERTIFICATES
The Ultimaker 2+ has CE marking and is therefore in compliance with the essential requirements of the
Machinery Directive, Electromagnetic Compatibility Directive, RoHS, RoHS II and Reach.
The ocial CE certificate can be downloaded here
www.ultimaker.com/safety
Loading...