INSERT PANEL GUIDE
®
Door & Drawer Insert Panel Guide
Refrigerators |
Combo® Models |
Ice Makers |
Freezers |
U-1115RB-00
U-1175RB-00
U-1175RB-02
U-1175RW-00
U-1175RW-02
U-2115RB-00
U-2115RW-00
U-2175RCB-00
U-2175RCB-02
U-2175RCW-00 U-2175RCW-02 U-2275DWRCOL-00 U-2275DWRCOL-02 U-ADA24RB-13 ULN-29RB-00 ULN-29RB-02 ULN-29RB-06 ULN-29RB-09 ULN-29RWH-00 ULN-29RWH-02 ULN-29RWH-06 ULN-29RWH-09
U-2175RFB-00
U-2175RFW-00
U-C2275DWROL-00 U-CLRCO2175B-00 U-CLRCO2175B-40 U-CO1175B-00 U-CO1175B-20 U-CO2175FB-00 U-CO2175FW-00 U-CO29B-00 U-CO29B-03 U-CO29B-20 U-CO29FB-00 U-CO29FWH-00
U-ADA15IMB-00 |
ULN-75FB-00 |
U-BI2115B-00 |
ULN-75FWH-00 |
U-B12115B-20 |
|
U-B12115W-00 |
|
U-B12115W-20 |
|
U-CLR2160B-00 |
|
U-CLR2160B-40 |
|
U-CLR2160W-00 |
|
U-CLR2160W-40 |
|
ULN-BI95B-00 |
|
ULN-BI95B-20 |
|
ULN-BI95BTP-00 |
|
ULN-BI95BTP-20 |
|
ULN-BI95WH-00 |
|
ULN-BI95WH-20 |
|
ULN-SP18B-03 |
|
ULN-SP18B-20 |
|
ULN-SS98-03 |
|
ULN-SS98-20 |
|
The American Built-In Undercounter Leader Since 1962 |
U-LINE.COM |
|
|
Safety Precautions
Safety Alert Definitions
Throughout this guide are safety items labeled with a Danger, Warning or Caution based on the risk type:
! DANGER
Danger means that failure to follow this safety statement will result in severe personal injury or death.
! WARNING
Warning means that failure to follow this safety statement could result in serious personal injury or death.
! CAUTION
Caution means that failure to follow this safety statement may result in minor or moderate personal injury, property or equipment damage.
Insert Panel Installation
Custom 1/4'' Thick Door/Drawer Panel Insert
Insert Panel Preparation
A custom insert panel may be inserted into the door / drawer frame. Custom insert panels can be flat or raised, as long as the maximum panel thickness, where inserted into the door / drawer reveal (channel), is no more than 1/4" thick. For raised panels, the depth of the reveal is 1/4" on all four sides.
NOTICE
Custom raised panels will reduce the door’s 90° swing if the unit is installed next to a wall or similar type of structure.
Panel Dimensions
The insert panel must not weigh more than 20 lbs.
Model |
Width |
Height |
|
|
|
|
|
|
1115R |
13-15/16" |
26-15/16" |
1175R |
22-15/16" |
26-15/16" |
2115R / BI2115 |
14-1/32" |
27-11/16" |
2175RC / 2175RF |
23-1/32" |
27-11/16" |
*2275DWRC / *C2275DWR |
23-1/32" |
12-15/32" |
29R / CO29 / CO29F |
19-13/16" |
21-13/32" |
75F |
22-15/16" |
26-15/16" |
ADA15IM |
13-15/16" |
26-15/16" |
ADA24R |
22-15/16" |
26-15/16" |
BI95 / BI95BTP / SP18 |
12-15/16" |
13-15/32" |
BI98 / SS98 |
13-15/16" |
15-15/16" |
CLR2160 |
14-1/32" |
27-11/16" |
CLRCO2175 / CO2175F |
23-1/32" |
27-11/16" |
CO1175 |
22-15/16" |
26-15/16" |
* The overlay model is used to create a black model which can be used with 1/4" insert panels (with the necessary purchase of two handle kits).
Insert Panel Installation
Door Models
1a. Remove top hinge screw pin with Phillips head screwdriver. Remove door by tilting forward and lifting off bottom hinge pin.
Drawer Models
1b. Drawer model inserts can be installed without removing the drawer from the unit. Simply pull the drawer open and follow instructions.
2. Pull door / drawer gasket out of groove (top edge of door / drawer only). Start in the middle and pull outward, moving toward the edge. This may take some force.
3. Remove the two outside screws, one on each side, holding door / drawer handle. Slightly separate handle from door / drawer.
4. Pull handle up and off.
u-line.com |
1 |