U-Line U-1115RB-00, U-1175RB-00, U-1175RB-02, U-1175RW-00, U-1175RW-02 Insert Panels

...

INSERT PANEL GUIDE

Door & Drawer Insert Panel Guide

Refrigerators

U-1115RB-00

U-1175RB-00

U-1175RB-02

U-1175RW-00

U-1175RW-02

U-2115RB-00

U-2115RW-00

U-2175RCB-00

Combo® Models

U-2175RFB-00

U-2175RFW-00

U-C2275DWROL-00

U-CLRCO2175B-00

U-CLRCO2175B-40

U-CO1175B-00

U-CO1175B-20

U-CO2175FB-00

Ice Makers

U-ADA15IMB-00

U-BI2115B-00

U-B12115B-20

U-B12115W-00

U-B12115W-20

U-CLR2160B-00

U-CLR2160B-40

U-CLR2160W-00

Freezers

ULN-75FB-00

ULN-75FWH-00

U-2175RCB-02

U-2175RCW-00

U-2175RCW-02

U-2275DWRCOL-00

U-2275DWRCOL-02

U-ADA24RB-13

ULN-29RB-00

ULN-29RB-02

ULN-29RB-06

ULN-29RB-09

ULN-29RWH-00

ULN-29RWH-02

ULN-29RWH-06

ULN-29RWH-09

U-CO2175FW-00

U-CO29B-00

U-CO29B-03

U-CO29B-20

U-CO29FB-00

U-CO29FWH-00

U-CLR2160W-40

ULN-BI95B-00

ULN-BI95B-20

ULN-BI95BTP-00

ULN-BI95BTP-20

ULN-BI95WH-00

ULN-BI95WH-20

ULN-SP18B-03

ULN-SP18B-20

ULN-SS98-03

ULN-SS98-20

The American Built-In Undercounter Leader Since 1962

U-LINE.COM

DANGER

WARNING

CAUTION

NOTICE

Safety Precautions

Panel Dimensions

The insert panel must not weigh more than 20 lbs.

Safety Alert Definitions

Throughout this guide are safety items labeled with a Danger, Warning or Caution based on the risk type:

Danger means that failure to follow this safety statement will result in severe personal injury or death.

Warning means that failure to follow this safety statement could result in serious personal injury or death.

Caution means that failure to follow this safety statement may result in minor or moderate personal injury, property or equipment damage.

Insert Panel Installation

Custom 1/4'' Thick Door/Drawer Panel Insert

Insert Panel Preparation

A custom insert panel may be inserted into the door / drawer frame. Custom insert panels can be flat or raised, as long as the maximum panel thickness, where inserted into the door / drawer reveal (channel), is no more than 1/4" thick. For raised panels, the depth of the reveal is 1/4" on all four sides.

Model Width Height

1115R 13-15/16" 26-15/16"

1175R 22-15/16" 26-15/16"

2115R / BI2115 14-1/32" 27-11/16"

2175RC / 2175RF 23-1/32" 27-11/16"

*2275DWRC / *C2275DWR 23-1/32" 12-15/32"

29R / CO29 / CO29F 19-13/16" 21-13/32"

75F 22-15/16" 26-15/16"

ADA15IM 13-15/16" 26-15/16"

ADA24R 22-15/16" 26-15/16"

BI95 / BI95BTP / SP18 12-15/16" 13-15/32"

BI98 / SS98 13-15/16" 15-15/16"

CLR2160 14-1/32" 27-11/16"

CLRCO2175 / CO2175F 23-1/32" 27-11/16"

CO1175 22-15/16" 26-15/16"

* The overlay model is used to create a black model which can be used

with 1/4" insert panels (with the necessary purchase of two handle kits).

Insert Panel Installation

Door Models

1a. Remove top hinge screw pin with

Phillips head screwdriver. Remove door by tilting forward and lifting off bottom hinge pin.

Drawer Models

1b. Drawer model inserts can be installed without removing the

drawer from the unit. Simply pull the drawer open and follow instructions.

Custom raised panels will reduce the door’s 90° swing if the unit is installed next to a wall or similar type of structure.

2. Pull door / drawer gasket out of groove (top edge of door / drawer only). Start in the middle and pull outward, moving toward the edge. This may take some force.

3. Remove the two outside screws, one on each side, holding door / drawer handle. Slightly separate handle from door / drawer.

4. Pull handle up and off.

u-line.com 1

+ 2 hidden pages