U-Line 29R, RV BI-95BTP, Marine SS-95 User Manual

8900 North 55th Street ▪ Milwaukee, WI ▪ 53224-9540 ▪ 414-354-0300 ▪ (fax) 414-354-7905

ORIGINS

¼” CUSTOM INSERT PANEL SIZES

BI-95 13 15/32” H x 12 15/16” W

BI-98 15 15/16”H x 13 15/16” W
29 Series 21 13/32” H x 19 13/16” W
75 Series 28 5/32" H x 22 15/16" W

75 Stainless Series 29 13/32" H x 22 15/16"W

1115 Series 26 15/16” H x 13 15/16” W
1175 Series 26 15/16” H x 22 15/16” W

o Zero clearance with a flush/flat door panel.

o Door will accept a raised panel. Allow proper clearance, on hinge

side when installing a raised panel. Amount of clearance will
depend on raised panel thickness.

o The maximum panel thickness when inserted into the door reveal

(channel) is ¼” thick.

o For raised panels on BI 95, BI98, 29 series and 75 series models

the depth of the reveal is ¼” on both sides and bottom and ½” on
top.

o For raised panels on 75 Stainless, 1115, and 1175 series models

the depth of the reveal is ¼” on both sides, bottom, and top.

o Allow 9/16” clearance on hinge side for 75 Stainless models with

a flush/flat panel. Additional clearance may be needed on hinge
side when installing a raised panel. Amount of clearance will
depend on raised panel thickness.

o Panel not to exceed 20 pounds.

o Conversion information: 1 inch = 2.54 cm

30164