U-Line 2275DWRW, 2275DWRCS, C2275DWRS, C2275DWROL, 2275DWRCOL User Manual
®
INSTALL GUIDE
2000 SERIES DRAWER MODELS
REFRIGERATORS
COMBO® REFRIGERATOR/FREEZER/ICE MAKERS
WINE CAPTAIN® MODELS
2275DWRCS
C2275DWROL
C2275DWRS
2275DWRCOL
2275DWRW
The Built-In Undercounter Leader Since 1962
U-LINE.COM
1 Table of Contents
Safety Precautions
Safety Alert Definitions.........................................................................................................................................1
General Precautions..............................................................................................................................................1
Inspect & Plan
Product Registration .............................................................................................................................................2
Models Covered.....................................................................................................................................................2
Inspection.................................................................................................................................................................2
Removing Protective Coating .................................................................................................................. 2
Tools / Material Required ....................................................................................................................................2
Exterior Cleaning ...................................................................................................................................................2
Overlay Models: .......................................................................................................................................... 2
Stainless Models:.......................................................................................................................................... 2
Prepare Site
2275DWRC Series..................................................................................................................................... 3
C2275DWR Series..................................................................................................................................... 3
Product Dimensions
C2275DWR & 2275DWRC..................................................................................................................... 4
Clearance Information
Other Site Requirements.....................................................................................................................................5
Power Supply ............................................................................................................................................... 5
Water Supply ............................................................................................................................................... 5
Standard Drawers
Drawer Panel Installation
Wood Grille Overlay
Prepare Plumbing
Level The Unit
Install Unit
Environmental Requirements................................................................................................................... 5
Checking Drawer Alignment............................................................................................................................... 6
Adjusting Drawer Alignment...............................................................................................................................6
Re-installation of Drawer.....................................................................................................................................7
Custom 1/4" Drawer Panel Inserts....................................................................................................................8
Drawer Panel Preparation ........................................................................................................................ 8
Drawer Panel Installation.......................................................................................................................... 8
Full Overlay Drawer Panels.................................................................................................................................8
Drawer Panel Preparation ........................................................................................................................ 8
Drawer Panel Installation.......................................................................................................................... 8
Grille Overlay .......................................................................................................................................................10
Preparation................................................................................................................................................ 10
Installation.................................................................................................................................................. 10
Water Supply Connection .................................................................................................................................12
Installation Tip.......................................................................................................................................................12
Anti-Tip Kit Installation ......................................................................................................................................13
Installation Troubleshooting..............................................................................................................................13
First Time Start Up..............................................................................................................................................14
Start-Up Troubleshooting..................................................................................................................................14
IMPORTANTIMPORTANT
DANGER
WARN ING
CAUTION
2 Safety Precautions
DANGER
WARN ING
WARN ING
CAUTION
IMPORTANTIMPORTANT
• PLEASE READ all instructions before installing,
operating, or servicing the appliance.
General Precautions
Use this appliance for its intended purpose only and follow these
general precautions with those listed throughout this guide:
• Proper installation procedures must be followed when
completing an installation or relocation of a unit.
Consult the installation guide before any installation
begins. U-Line contact information appears on the rear
cover of this guide.
• This unit requires connection to a dedicated 15 Amp
grounded (three-prong), polarized receptacle, installed
by a qualified electrician, compliant with applicable
electrical codes.
Safety Alert Definitions
Throughout this guide are safety items labeled with a Danger,
Warning or Caution based on the risk type:
Danger means that failure to follow this safety statement will
result in severe personal injury or death.
RISK OF CHILD ENTRAPMENT. Before you throw away your
old refrigerator or freezer, take off the doors and leave shelves
in place so children may not easily climb inside.
SHOCK HAZARD - Electrical Grounding Required.
• Never attempt to repair or perform maintenance on
the unit until the electricity has been disconnected.
• Never remove the round grounding prong from the
plug and never use a two-prong grounding adaptor.
• Altering, cutting of power cord, removal of power
cord, removal of power plug, or direct wiring can
cause serious injury, fire and or loss of property and
or life, and will void the warranty.
• Never use an extension cord to connect power to the
unit.
• Always keep your working area dry.
Install provided Anti-Tip kit on all Wine Captain
Models and Glass Door Refrigerators. Serious personal
injury could occur.
Warning means that failure to follow this safety
statement could result in serious personal injury,
property or equipment damage.
Caution means that failure to follow this safety statement
may result in minor or moderate personal injury, property
or equipment damage.
• Use care when moving and handling the unit. Use gloves
to prevent personal injury from sharp edges.
• If your model requires defrosting, DO NOT use an ice
pick or other sharp instrument to help speed up
defrosting. These instruments can puncture the inner
lining or damage the cooling unit. DO NOT use any type
of heater to defrost. Using a heater to speed up
defrosting can cause personal injury and damage to the
inner lining.
• Do not lift unit by door handle.
• Never install or operate the unit behind closed doors.
Be sure front grille is free of obstruction. Obstructing
free airflow can cause the unit to malfunction and will
void the warranty.
• Failure to clean the condenser every six months can
cause the unit to malfunction. This could void the
warranty.
• Allow unit temperature to stabilize for 24 hours before
use.
• Do not Block any internal Fans
Use only genuine U-Line replacement parts. Imitation
parts can damage the unit, affect its operation or
performance and may void the warranty.
U-Line Safety Precautions 1
3 Inspect & Plan
WARN ING
Product Registration
You have received a carton containing your U-Line Combo Drawer
Model Ice Maker/Refrigerator or U-Line Refrigerator with a
package inside containing a Use and Care Guide, a Product
Registration Card, water connection parts and Anti-Tip Kit.
Complete and mail the Product Registration Card or register
online at www.U-LineService.com. Once your unit is installed,
keep the Use and Care Guide and this Installation Guide in a safe
place for future reference.
Models Covered
This installation guide covers the following models
Tools / Material Required
• Screwdrivers — slotted and Phillips head
(If installing a 3/4” Full Overlay panel)
• 3/4” overlay frame material
• Cutting Tools
• Drill & Drill Bits
(If installing 1/4” Panel Insert)
• 1/4” thick door panel material
• Cutting Tools
Exterior Cleaning
Overlay Models:
• The drawers, grille and cabinet may be cleaned with a mild
detergent and warm water solution. Do not use solvent-based
or abrasive cleaners. Use a soft sponge and rinse with clean
water. Wipe with a soft, clean towel to prevent water spotting.
U-2275DWRCOL-00 U-2275DWRWS-00
U-2275DWRCS-00 U-C2275DWROL-00
U-2275DWRWOL-00 U-C2275DWRS-00
Inspection
Inspect the unit on a flat, level surface capable of supporting it’s
entire weight.
Removing Protective Coating
All Models:
The protective coating covering the inside of the top drawer must
be removed before using.
Stainless Steel Models:
When inspecting/installing a Stainless Steel unit, the protective
coating covering the drawer fronts must be removed. Start at a
corner of the drawers and pull back the protective coating to
remove it from the drawer fronts.
After all the protective coating has been removed from the
drawers, clean all Stainless Steel surfaces with Claire Stainless Steel
Polish and Cleaner or comparable product or a mild detergent and
warm water solution and soft cloth. Do NOT use abrasive cleaning
agents.
If cleaning with mild detergent and warm water solution and soft
cloth, the unit MUST be treated with Claire Stainless Steel Polish
and Cleaner or comparable product to prevent discoloration.
Stainless Models:
• Stainless steel models can discolor when exposed to chlorine
gas, pool chemicals, salt water or cleaners with bleach.
• Keep your stainless steel unit looking new by cleaning with a
good quality all-in-one stainless steel cleaner/polish on a
monthly basis. For best results use Claire Stainless Steel Polish
and Cleaner, which can be purchased from U-Line Corporation.
(The part number is 173348.) Comparable products are
acceptable. Frequent cleaning will remove surface
contamination that could lead to rust. Some installations may
require cleaning on a weekly basis.
• Do not clean with steel wool pads.
• Do not use cleaners that are not specifically intended
for stainless steel (this includes glass, tile and counter
cleaners).
• If any surface discolors or rusting appears, clean it quickly with
Bon-Ami or Barkeepers Friend Cleanser and a non-abrasive
cloth. Always clean in the direction of the grain. Always finish
this process with Claire Stainless Steel Polish and Cleaner or
comparable product to prevent further problems.
• Use of abrasive pads such as Scotchbrite will cause the
graining in the stainless to become blurred.
• Rust that is allowed to linger can penetrate into the surface of
the stainless steel and complete removal of the rust may not be
possible.
Rust that is allowed to linger can penetrate into the
surface of the stainless steel and complete removal of
the rust may not be possible.
U-Line Inspect & Plan 2
4 Prepare Site
IMPORTANTIMPORTANT
WARN ING
IMPORTANTIMPORTANT
34-1/4"
to
35-1/8"
24-1/4"
24"
1-1/2"
7"
34-1/4"
to
35-1/8"
24-1/4"
24"
1-1/2"
7"
34-1/4"
to
35-1/8"
24-1/4"
24"
1-1/2"
7"
Your U-Line product has been designed for either free-standing or
built-in installation. When built-in, your unit does not require
additional air space for top, sides, or rear. However, the front grille
must NOT be obstructed and clearance is required for an
electrical connection in the rear.
• Unit can NOT be installed behind a closed cabinet door.
SHOCK HAZARD — Electrical Grounding Required.
• Never remove the round grounding prong from the
plug and never use a two-prong grounding adapter.
• Never use an extension cord to connect power to the
unit.
Electrical installation must observe all state and local
codes. This unit requires connection to a grounded (threeprong), polarized receptacle that has been placed by a
qualified electrician.
The unit requires a grounded and polarized 115 VAC, 60 Hz, 15A
power supply (normal household current). An individual, properly
grounded branch circuit or circuit breaker is recommended. GFCI
(ground fault circuit interrupter) is usually not required for fixed
location appliances and is not recommended for your unit because
a GFCI could be prone to nuisance tripping. However, be sure to
consult your local codes.
See below for recommended receptacle location & cut out
dimensions
C2275DWR Series
Follow the cut-out drawing The 24-1/4" width allows 1/4" for ease
in installation and removal of the unit. 24" is the cabinet depth in
most installations.
2275DWRW Series
2275DWRC Series
Follow the cut-out drawing The 24-1/4" width allows 1/4" for ease
in installation and removal of the unit. 24" is the cabinet depth in
most installations.
Follow the cut-out drawing. The 24-1/4" width allows 1/4" for ease
in installation and removal of the unit. 24" is the cabinet depth in
most installations.
Prepare Site 3
5 Product Dimensions
Black
Stainless Steel
33-7/8"
24"
23-3/8”
3-7/8”
23-1/4"
33-7/8”
24"
3-7/8”
33-7/16”
23-3/8”
23-15/16”
3-7/8”
Stainless
2275DWRW
Black
Stainless Steel
33-7/8"
24"
23-3/8”
3-7/8”
23-1/4"
33-7/8”
24"
3-7/8”
C2275DWR
33-7/8”
23-1/4”
23-15/16”
3-7/8”
Overlay
C2275DWR & 2275DWRC
2275DWRC
2275DWRW
Product Dimensions 4
Loading...