UK Link UK-8204, UK-8208 Instruction

1 / 9

Instruction for how to log in UK-LINK DVR

This lesion is only suitable for the following model number:

 UK-8204 with HDMI
 UK-8208 with HDMI

Step 1: set the DVR ports and LAN IP, DDNS.

Connect all the power cable, BNC/VGA cable, USB mouse and so on.

On the desktop click right-click you will see the following page:

Click “SETUP”:

2 / 9

Click “NETWORK”:

In this “NETWORK” page, 1st of all we need to set the following items:
ITEM A: ports. They are SERVER PORT/IE PORT/MOBILE PORT. When we finish it we need to add these ports on the router.
ITEM B: LAN IP/GATEWAY/PRIMARY DNS/SECONDARY DNS. This part must be the same configuration as router setting.

After finishing the configuration for BASIC setting, we need to click “APPLY” and then set the DDNS.
Click the “DDNS”, select “DVR DDNS” and then click “get DDNS”, you will get a free DDNS ID from our DDNS server.

3 / 9

You can see the ID in “USER NAME” bar.

You will get the domain: dy.vip620.com

You will get the DVR ID: xxxxxxxxxx

4 / 9

Step 2: add the 3 ports inside the router.

Open IE browser, input 192.168.1.1 to the browser bar, and then input both “admin” for the user name and password.
Then click “OK”.

Click the “Virtual Servers” and then click “Add New…” to add new port to the DVR LAN IP:

Click the “Forwarding”:

5 / 9

One time add one port, in the IP Address need to put the DVR LAN IP there, and need to select “ALL” for “Protocol”, and
then click “Save”:

We need to add the 3 ports in router; they are SERVER PORT/IE PORT/MOBILE PORT.

6 / 9

Step 3: set the PC IE browser

Open IE browser, open the properties interface for IE:

Click “Internet Options”

Click “Security” page

7 / 9

Click “Custom level…”

Roll to “ActiveX controls and plug-ins”, change all options into “Enable”. Here need to ignore the tips that system gives.
Then click “OK”.

8 / 9

Open the DVR via LAN computer. You need to install the plug-in as mentioned.

After you install the plug-in, visit the DVR once again, and then need to click “Compatibility View”. DVR default user name
and password is:

 User name 1: 1

Password: (empty)

 User name 2: admin

Password: admin

9 / 9

Step 4: view on android/iPhone:

For android: install the APK file named “CPlayer” from the CD
For iPhone: open app store and search “CPlayer” and install
After finish installation, just open it.

For more lessons and more CCTV information, plz add my facebook: [e-mail]