UCLOUDLINK NETWORK TECHNOLOGY ELTP18A04 User Manual

GlocalMe User Manual

Notes

·This user manual is specifically designed to guide you through the
functions of your mobile phone.

·We comply with the sustainable development strategy, therefore
reserve the right to change the functions, interface or appearance
of the product at any time without prior notice.

·In the event of the GlocalMe Connect software becoming
unresponsive, due to upgrade or any unforeseen reason, the normal
operations of the mobile phone will be unaffected.

·Please follow the normal procedure to turn off your mobile phone
and install SIM card; avoiding damage to SIM card or mobile phone.

·This product utilizes built-in customized ROM, developed by
uCloudlink and GlocalMe. Customized functions and product failure
may occur if you root the ROM system or break code to change
system files. Therefore, uCloudlink shall reserve the right to reject
warranty claims for mobile phone malfunctions, caused by arbitrary
rooting.

·For more product information and services please refer to
http://www.glocalme.com

Safety Precautions & User Guide

·For safety concerns and effective operation of your mobile phone,
please read the following information carefully, which can be
helpful to guide you to comply with the terms of the warranty and
extend the life of your mobile phone.

·In order to avoid possible hearing damage, do not listen at high
volume levels for long periods.

Using Mobile Phone, Charger and Other Accessories

·Please turn off mobile phone at locations with official notice or
prohibition (airport, gas station, hospital, etc).

·Keep mobile phones and accessories out of reach from children.

·Avoid your mobile phone and its accessories coming in contact with
liquid or humid environments.

·Avoid placing your mobile phone in extreme heat or cold
environments.

·Avoid placing mobile phones near open flames.

·Do not paint the mobile phone.

·Avoid dropping, throwing or bending mobile phones.

·Avoid storing mobile phones with computer disks, travel cards,
credit cards or any other magnetic objects to prevent potential data

loss on listed items.

·Do not place mobile phones in environments with temperatures
exceeding 40°C, such as balconies and direct sunlight.

·Never use mobile phones in thunderstorms in order to avoid potential
lightning strikes and other injures.

·Do not attempt to disassemble mobile phones, or repair mobile
phones and accessories by yourself.

·Do not use any charger specified by nonmobile phone manufacturers
to avoid potential danger.

·Wipe the mobile phone with an anti-static cloth. Do not use
electrostatic cloth to wipe the mobile phone.

·Avoid using harsh chemicals or strong detergents containing
corrosive ingredients, which may damage the chassis.

·LCD displays and other components are fragile and easily scratched;
avoid contact with sharp or abrasive objects.

·If your mobile phone, charger or accessories don’t operate normally,
please contact uCloudlink customer service on ([phone])
for help.

Potentially Explosive Environments

·Once entering potentially explosive environment (such as a gas

station) or its perimeter, please turn your mobile phone off and
abide by all safety signs and instructions. Sparks or electric waves,
produced by mobile phones in such areas, may cause an explosion
or fire.

Airplane

·The wireless device can interfere with aircraft navigation systems;

please comply with the relevant provisions of the airline and do not
use the device in ‘wireless device’ prohibited areas.

Hospital

·When entering hospitals, please turn off your mobile phone and

follow all the safety signs and instructions. Radio waves from mobile
phones may affect the normal operation of electronic medical
equipment and even affect the work of cardiac pacemakers.

Personal Medical Device

·Mobile phones may affect the use of pacemakers, hearing aids,

cochlear or other implants.

·If you have a pacemaker, place your phone onto the opposite ear to
the pacemaker. Always maintain a minimum separation distance of
15cm between the phone and pacemaker. If you are concerned that
interference has occurred, please turn off your phone immediately
and move it to a distant location, and contact your heart specialist
for details. For other medical devices or implants such as hearing
aids, please consult the manufacturer.

Driving

·Your primary responsibility when driving is the safe operation of
your vehicle and concentration on the road.

·When receiving an incoming call while driving, leave the road and
park before answering. It is recommended that you use a
‘hands-free’ device when driving, if permitted to, according to the
driving laws and regulations of your country.

Children Safety

·Keep mobile phones and all related accessories out of the reach of
children. Do not allow children to use mobile phones or related
accessories, which may injure them or others. Some small
components in the mobile phone or its accessories may be
disassembled and dangerous if swallowed.

Original Accessories

·Charger: connect the AC charger to the specified power supply.

Make sure the cable is in the correct position; refrain from
stretching the cable. In order to avoid the risk of electric shock,
disconnect the charger or cable from the power supply, before
cleaning the device. The charger is designed for indoor use only
and not to be used outside or in a damp environment.

·Battery: the mobile phone has an integrated battery; do not

disassemble. Charge the battery only at temperatures between -10°
C to 40°C. Remove the charger or data cable after fully charged,
as this will prolong the battery’s life. Only use the original charger
supplied to charge the mobile phone.

·

The mobile phone may become hot during charging or prolonged
use, which is normal and will not affect the service life or
performance of the device. If the mobile phone is overheating, stop
using immediately.

Your mobile phone

7138

1 4

2

3

10 11 12

1. Front Camera

2. Notification LED

3. Volume

4. Light/Proximity Sensor

5. Receiver

6. POWER/LOCK

7. Dual Camera

Button Function

Fingerprint

Volume Adjust volume of call, ringtone, music and video.

POWER/LOCK

5

9

6

8. Flashlight

9. Fingerprint

10. Headset Jack

11. Main Microphone

12. Type C interface

13. Secondary Microphone

14. Speaker

Unlock screen

Short press the button under the normal status of
bright screen to turn off the phone backlight; wake
up phone by short press under sleep mode and
long press more than 10 seconds to force restart.

Battery charging: the battery of the mobile phone is a built-in
battery; please do not disassemble the battery. Insert the small end
of the charging data cable into the I/O interface of the mobile phone;
connect the other end of the charging data cable into the travel
charger, then plug in the charger to an electrical outlet to start
charging the battery. When the battery is fully charged, unplug the
charger from the power outlet. If the battery is left unused for a long
time, it will gradually discharge and must be recharged before use, to
ensure normal function.

Note: the data cable can be inserted into an electric USB socket to
charge battery, but the charging process will be slower.

Tips: the battery icon in the tray can indicate the power information. When the

battery is too low, the phone will automatically turn off, please charge the battery.

If the battery is seriously insufficient, the charging state may not be displayed

immediately (wait for a moment to check). Using the mobile phone to play games

14

during the charging process may lead to low battery and automatic power off.

SIM card: You can conduct some operations without the SIM card,
but the communication function can only be realized by inserting the
SIM card. In the absence of SIM card, if you are in the network
coverage, the mobile phone can choose any network to register and
make emergency calls supported by the network operator. For
specific emergency numbers supported, please consult network
operators.
Inserting the SIM card:

1. Insert the tip of the SIM removal tool into the small hole next to
the
SIM card tray slot. Push the tip all the way into the hole until the
SIM card tray ejects.

2. Pull the SIM card tray out slightly with your fingers.

3. Place the SIM card or Micro SD card (refer to identification on the
tray) into the tray and push the tray back into slot.

wechat

Product Model: ELTP18A04
HONGKONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED
Address: 29/F, One Pacific Centre, 414 Kwun Tong Road, Kwun Tong, KLN
TEL: [phone]
Email: [e-mail]
Web: http://www.glocalme.com

Nano SIM1

TF/Nano SIM2

Note: this mobile phone is a dual-card and dual-standby mobile

phone, and two Nano SIM cards can be inserted in each card slot.
The mobile phone supports dual-card blind insertion, and the default
card 1 is the main card, and the main and auxiliary card can be
switched through the system settings. Main card supports
TD-LTE/LTE FDD/TD-SCDMA/WCDMA/GSM network. When using
the GlocalMe Connect service, it is recommended to insert only one
SIM card; if you insert two SIM cards, one SIM card will not be
available when the GlocalMe connection is enabled. Please carefully
keep your SIM card, and do not bend, scratch, and expose to static
electricity or water immersion. SIM card shall be inserted in
accordance with notification.

1 2 3 4 5

EU regulatory conformance

Body worn operation

Turn on: hold in the POWER button until the phone powers on.

Turn off: hold in the POWER button until the phone displays ‘slide
to turn off’- follow prompts.
Contacts: easily manage your communications with contacts via
phone, messaging, and email.
Messages: send and receive short text messages (SMS) and
multimedia messages (MMS).

Dial Pad: input phone numbers on the dial pad to make calls.
Receiving Calls: slide up to answer the incoming calls.
Rejecting Calls: slide down to reject the incoming calls.
Call Services: includes call forwarding, call waiting and more.

Note: please consult the network operator for details.

Browser: accessing the Internet can allow you to enjoy a high-speed
Internet surfing experience, whenever and wherever.

Note: for Internet access features, please confirm what is supported
by your network service provider and if the service is active; refer to
your network service provider for details.

Email: configure email accounts and easily send and receive emails.
Clock: set alarms, reminders, repeat cycles and more.
Calendar: create events, query dates and manage your calendar.
Gallery: manage and view photos.
Camera: capture photos and videos.
Audio Recorder: record, play back and delete.
System Update: update your system through data connection and

WLAN (Wi-Fi).

Tips:

1. Your phone will use mobile data during system updates. Please consult your

network provider for specific data rates.

2. System update may take a while; do not turn off the phone during system update.

3. System update will not affect the data on your phone.

4. System update will improve user experience and it is recommended to use the

‘Smart Update’ feature.

Settings: configure display, sound, vibration and other common
features.
WLAN (Wi-Fi): access the Internet through WLAN. Enable WLAN to
automatically scan and select a network to connect to; enter
network password if required, then tap to connect.

Tips: turn off WLAN when not in use to conserve battery power; if you have

network coverage and have WLAN enabled, the phone will automatically connect to

a previously accessed secured WLAN.

Bluetooth: a short-range wireless communication technology, that
allows devices to exchange information over short distances. If there
are obstructions between devices, the effective distance may need to
be reduced. Enable Bluetooth to automatically scan and select a
device to pair; tap ‘PAIR’ to establish the secured connection with
this device if needed.

Tips: set your visibility and choose if you are able to be detected by nearby

Bluetooth devices.

More: set the VPN and WLAN display in WLAN and Network features.
Sound and Vibration: set notification sounds and some operational

feedback.

Display: configure brightness, display sleep time and more.
Storage: check storage capacity and available space.

Tips: the available space is less than the nominal, because the operating system

and built-in applications take up some storage space.

Application Management: manage and delete installed applications,
view and control the current active services.
Account Management: change the auto sync settings and manage
sync accounts.
Factory Reset: return your phone to its original state by following the
prompts. It permanently erases all personal data on your phone.

Document Management: manage and edit documents.
Tools: calculator, compass and more are supported.

Technical Specification

Basic Specification

Dimension

Design

Antenna

SIM Card

Network

Built-in Camera

Micro SD Card

Headset Jack

SAR Value

Display Parameter

Type Dimension Resolution

IPS 5.7 Inches 1440*720 Pixels

152.9*74.2*8.5mm

Straight Panel PDA

Built-in

Standard Nano SIM Card

TD-LTE/LTE FDD/WCDMA/
GSM

Rear Dual Camera 8MPPixels AF+2MP Pixels,
Front Camera 5MP Pixels

Supported

American Standard Jack

The Maximum Specific Absorption Rate (SAR) of
electromagnetic radiation is 2.0W/kg

Accessories

No.

Mobile Phone

1

Travel Charger

2

USB Charging Cable

3

4 User Manual

Note: the items included in the accessories list are subject to final sales. Please
consult the dealer for details

No.

QuantityItem

1

1

1

1

5

SIM Removal Tool

QuantityItem

1

The device complies with RF specifications when used at a distance of 5 mm from

your body. Keep the device away from your body to meet the distance requirement.

Certification information (SAR)

The Specific Absorption Rate (SAR) is the unit of measurement for the amount of

radio frequency energy absorbed by the body when using a device. The SAR value is

determined at the highest certified power level in laboratory conditions, but the

actual SAR level during operation can be well below the value. This is because the

device is designed to use the minimum power required to reach the network.
The SAR limit adopted by Europe is 2.0 W/kg averaged over 10 grams of tissue, and

the highest SAR value for this device complies with this limit.

Statement

Hereby, HONGKONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED declares

that this device is in compliance with the essential requirements and other relevant

provisions of Directive (RED) 2014/53/EU

FCC Statement

FCC Compliance(When US bands are supported)

This device is also designed to meet the requirements for exposure to radio waves

established by the Federal Communications Commission (USA).
The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue.
The highest SAR value reported to the FCC for this device type complies with this

limit.

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, (2) this
device must accept any interference received, including interference that may cause
undesired operation.

User that changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

Body-worn Operation

This device was tested for typical body-worn operations. To comply with RF exposure
requirements, a minimum separation distance of 10mm for body worn must be
maintained between the user’s body and the handset, including the antenna. Third-party
belt-clips, earphone, and similar accessories used by this device should not contain any

metallic components. Body-worn accessories that do not meet these requirements may
not comply with RF exposure requirements and should be avoided. Use only the
supplied or an approved antenna.

6 7 8 9

10

Canada, Industry Canada (IC) Notices

This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference

that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR dʼInnovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. Lʼexploitation
est autorisée aux deux conditions suivantes : (1) lʼappareil ne doit pas produire de
brouillage, et (2) lʼutilisateur de lʼappareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible dʼen compromettre le fonctionnement.

Body-worn Operation

This device was tested for typical body-worn operations. To comply with RF exposure
requirements, a minimum separation distance of 10mm for body worn must be
maintained between the user’s body and the handset, including the antenna. Third-party
belt-clips, earphone, and similar accessories used by this device should not contain any

metallic components. Body-worn accessories that do not meet these requirements may
not comply with RF exposure requirements and should be avoided. Use only the
supplied or an approved antenna.

FCC S

Th
15 of the FCC rules. These limits a

tatement

is equipment has been tested and found to comply with the limits for a Class B digital d

re designed to provide reasonable protection against harmful interference in

evice, pursuant to part

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient

-

Increase the separation between the equipment a

-

-Co

-C

or relocate the receiving antenna.

nd receiver.

nnect the equipment into an outlet on a circuit d

ifferent from that to which the receiver is connected.

onsult the dealer or an experienced radio/TV technician for help.