HBC 100 PLUS
User Manual
Helmet Communicator
US-PUB#100PLUS-1L
1
30
Welcome to
HBC100 PLUS
helmet communicator
control unit
Hi-fi stereo headset
Metal mounting bracket &
velcros for speakers
User manual
USB charging cable
HBC100 PLUS
Helmet Communicator
User Manual
Notices
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation
of the device. This Class[B] digital apparatus complies with Canadian
ICES-003.
Cet appareil s’accorde avec Industrie Canada licence-exempte
RSS standard.
(1) cet appareil ne peut pas causer l’intervention, et (2) cet appareil
doit accepter de l’intervention, y compris l’intervention qui peut causer
l’opération non désirée de.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada
29
2
Notices
Contents
TECHNICAL SUPPORT:
For additional information please visit our website at
www.uclear-digital.com
For customer and technical support in the US and Canada, please contact:
BITwave USA LLC
1093 E lron Eagle Dr. #115
Eagle, ID 83616
1-855-BIT-WAVE
COPYRIGHTS:
Copyright © 2012 BITwave Pte Ltd. All rights reserved. No part of this guide
may be reproduced in any form or by any process whatsoever without prior written
consent from BITwave Pte Ltd.
LICENCES:
The trademark and logo is exclusively owned by BITwave Pte Ltd & FSC.
Any use of the mark by any other parties without prior written permission of BITwave
Pte Ltd & FSC constitutes an infringement of legal rights. The Bluetooth trademark is
owned by Bluetooth SIG and is used under licence by BITwave Pte Ltd & FSC.
FCC COMPLIANCE STATEMENT FCC ID:NNMCHBC200 This device complies with
part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including
interference that may cause undesired operations.
Note: The manufacturer is not responsible for any radio or tv interference caused by
unauthorized modifications to this equipment. Any modifications to the equipment will
void the manufacturer’s warranty.
Contents -------------------------------------------------------------------------- 1
Quick User Guide--------------------------------------------------------------- 3
Warnings and Safety Instructions------------------------------------------- 7
Features -------------------------------------------------------------------------- 9
Installation ------------------------------------------------------------------------ 10
General Operations ------------------------------------------------------------ 13
Mobile Phone Operations ----------------------------------------------------- 15
Music Streaming Operations ------------------------------------------------- 17
Intercom Operations ----------------------------------------------------------- 18
GPS Devices -------------------------------------------------------------------- 20
Button Configurations Summary -------------------------------------------- 21
Status Indicator Configurations Summary -------------------------------- 22
Technical Data ------------------------------------------------------------------ 23
Notices ---------------------------------------------------------------------------- 24
3
28
Quick User Guide
Your HBC100 PLUS at a glance
GENERAL FUNCTIONS
Before using your HBC100 PLUS please charge it first!
Charge
Check Bluetooth phone capabilities before use.
To charge, use the provided charging cable by
connecting it to any compatible AC adapter or
laptop / computer USB port. While charging, the
status indicator light will be red. Upon fully
charged, the status indicator light will be blue.
Low Battery Indicator
You need to charge the helmet communicator
when the status indicator light blinks red twice
every 2 seconds with a beep every minute.
Install Speakers
Make sure the speaker wire is inserted into the
main unit. lnsert the speaker wire into the control
unit until you can no longer see the 3 ribs on the
speaker wire plug.
Answer Button Up Button
Status Indicator
Down Button
Notices
PERSONAL SAFETY:
Do not open the seal of the hardware, tamper, repair or modify any parts. Do
not touch the product with metal objects or parts or chemical products.
Violation of the above will lead to potential fire hazards and mishaps. Please
contact the technical support or your local supplier if your product malfunctions.
Always comply with the local law and traffic regulations. Where use of the
product is not permitted or allowed by any laws and regulations including the
traffic laws of your country, we warn you not to go against such restrictions.
You will bear the full responsibilities of any breaches of law and regulations.
You should not allow the operations or use of the product or any attempts to
use it by any persons including yourself to compromise anyone’s safety
including your own or to cause harm to any vehicles, property, objects,
livestock, inventories, assets and the like under any circumstances. You or any
users of the product are to take all necessary safety measures and precautions
and to remain alert to all surrounding conditions. You are warned not to operate
the product if you are not physically capable of doing so in a safe manner, if you
have or will consume any alcohol or any mind-altering substance during its
operation so that your alertness is compromised or if you have any medical
conditions or needs that may compromise your abilities to do so in a safe
manner. We warn you of the inherent, unforeseeable and unlimited risks and
dangers in using the product while in traffic, including injury or illness, strains,
fractures, partial and/or total paralysis, death or other ailments that could cause
serious disability due to any causes.This product is only for use by persons
eighteen (18) years of age and above who have understood the warnings, risks
and the terms of use. You confirm that you have read this release of liability and
fully understand its terms and that you have given up substantial rights by using
or attempting to use the product.
27
4
Notices
All risks from operating or usage of the product rest solely and entirely with the user of
this product, the original purchaser or any third parties, who assumes full responsibility
for all injuries, losses and/ or damages, whether caused in whole or in part by the
negligence, omissions or other conduct of others, including that of BITwave, FSC and all
their representatives, partners, agents, distributors, suppliers, resellers and all others in
its supply and distribution chain either due to the designer’s or manufacturer’s
negligence or omissions or any third parties involved.
CORRECT DISPOSAL OF THIS PRODUCT:
Do not dispose this product with other household wastes at the end of its working life.
There is a separate collection system for used electronic products in accordance with
legislation that requires proper treatment, recovery and recycling. Household users
should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their suppliers and refer
to the terms and conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.
PRODUCT INFORMATION:
BITwave, FSC and all their representatives, agents, distributors, suppliers or resellers
shall not be held responsible for any consequences arising from any errors or omissions
in the guide or resulting directly or indirectly from the use of the information herein.
BITwave and FSC reserve the right to amend or improve the product design or user
guide without any restrictions and without any obligation to notify users. All information
here is accurate as of the date of printing.
Please check for the latest version of any the modified or upgraded product on the
website: www.uclear-digital.com from time to time.
Quick User Guide
Power On
Hold Answer for 2 seconds.
Power Off
Hold Answer for 5 seconds.
Volume Up
Press Up once.
Volume Down
Press Down once.
Reset
Press all 3 buttons together.
*NOTE: The volumes for mobile phone, music and intercom functions are controlled separately.
5
26
Pairing
Quick User Guide
Last Number Redial
MOBILE PHONE FUNCTIONS
Pairing your HBC100 PLUS with your mobile phone.
>Check Bluetooth phone capabilities
>Hold Up and Down buttons together
Hold Up and Down together
for 2 seconds
Answer Incoming Call
Use voice pickup, say ‘hello’ or ‘pickup’.
Manually press Answer button once.
Reject/ End Incoming Call
Hold Answer button for 2 seconds.
OR
>From your mobile phone Bluetooth
>If your phone requires a password,
before use.
for 2 seconds. The status indicator
light will blink blue and red alternately.
menu, search for ‘HBC100 PLUS’.
enter ‘0000’.
Use voice pickup, say ‘hello’
or ‘pickup’.
Voice Dial
Hold Answer and Down
button for 2 seconds.
Notices
Warranty does not cover data recovery and physical deterioration due to use, damages
resulting from accidents, storage, loss or data loss or damage during repairs or transits.
The sender will bear all transportation charges for functioning products but which were
declared defective.
LIMITATIONS OF WARRANTY:
All product warranties for the product by are limited to those mentioned in the
product manual.
WAIVER AND DISCLAIMER:
BITwave, FSC and all their representatives, partners, agents, distributors, suppliers and
resellers shall not be liable and will be held harmless from any and all litigation, claims,
debts, demands, actions and liability which may arise, directly or indirectly, from operating
or using the product for any damages, losses, distress, pain, suffering, discomfort, loss
and injuries including bodily harm illness, strains, fractures, partial and/or total paralysis,
death or other ailments that could cause serious disability either to any persons, or any
parties whether the user or other third parties or their possessions, or to any goods,
vehicles, properties, assets among others including your own suffered by any persons,
organizations, or any third parties whether physical or otherwise and which may accrue
to you in the future, to the fullest extent permitted by law as a result of the use, operation,
malfunctioning, misuse, disposal or repairs of the product or any other reasons, conditions
or circumstances or attempts to do so whether due to negligence, omissions, or otherwise
of BITwave, FSC or any of their representatives, partners, agents, .distributors, suppliers,
resellers, designer, manufacturer or any others in its supply and distribution chain or any
third parties involved.
To swap between 2 concurrent calls, press
3 Way Calling
the Answer button once.
25
6
Notices
BATTERY WARNING:
The helmet communicator contains a rechargeable lithium ion polymer battery.
To reduce risks of fire or burns, do not disassemble, crush, puncture, short external
contacts or dispose in fire or water.
CHARGING NOTICE:
To reduce the risk of personal injury, electrical shock, fire or damage to equipments, please
follow all the instructions below:
- Do not immerse the product, AC adaptor or speakers in water.
- Do not install, place or use the product near any source of heat
for example: stove, radiator, oven, toaster, coffee maker or other
apparatus that gives off heat.
WARRANTY:
Without prejudice of legal warranty, the product is covered under a 2 year warranty by
manufacturer from the date of purchase. Please provide the proof of purchase when you
return the item to the supplier. The warranty covers manufacturing defects only. The
warranty is voided by any unauthorized repairs, misuse, misapplication, tampering of the
product, modifications, upgrading or results of any failures to follow the guidelines as set
out in the product brochure or by any of the actions specified in this brochure or anywhere
in our technical publishing released to the public from time to time which would have
voided the warranty.
Quick User Guide
MUSIC STREAMING FUNCTION
*NOTE: For music Bluetooth adaptor you would need to pair the music Bluetooth adaptor before using it with HBC100 PLUS.
Pairing (for Music Bluetooth adaptor Only)
Hold Up and Down buttons together for 2 seconds.
Press the Down button 2 times.
INTERCOM FUNCTIONS
Pairing your HBC100 PLUS to another HBC100 PLUS, the helmet communicator needs to be
switched off before performing the following steps:
*NOTE: Pairing needs to be done once.
Intercom Pairing on First Unit
Press Answer and Down buttons
Backtrack
for 3 seconds
Press the Up button 2 times.
Intercom Pairing on Second Unit
Press Answer and Up buttons
Play Music
Press the Answer button 2 times.
Stop Music (Quick Mute)
Press the Answer button 1 time.
Fast Forward
for 3 seconds
Initiate Conversation
Hold the Up button for 2 seconds.
Terminate Conversation
Hold the Down button for 2 seconds.
24
7
Warning and Safety Instructions
This manual uses the
Below is an explanation of the icons.
Attention
> This icon highlights special instructions and precautions intended to avoid damage
to the system. Non-compliance may void the product warranty.
Warning
> This icon provides precautions important to prevent injuries to the user.
Attention
> Please read through the operating instructions to understand how to operate the system,
in particular the safety instructions.
Warning
> Please note that there are some countries that by law disallow the rider to set the
helmet communicator to a volume that prevents you from perceiving the
surrounding.
> Please note that in some countries the use of both speakers simultaneously is
authorized only out of pubic traffic conditions.
> Please check with the relevant authorities for local safety legislation before using the
helmet communicator on the road.
> Please learn how to use the buttons by looking into the mirror before using the
helmet communicator on the road.
and
icons to highlight certain instructions.
Notices
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End user must follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves
established by the Federal Communications Commission (USA). These requirements set
a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported
under this standard during product certification for use when properly worn on the body is
0.178 W/kg.
8
23
Technical Data
Unit
Dimensions (L x W X H)
75mm x 45mm x 26mm
Weight
36g
Audio
Frequency response
30Hz to 20 kHz
Sampling rate
48kHz, 16 bit
SPL
105dB +/- 2dB
Bluetooth
Specifications
Version 2.1 EDR, Class 1
Profiles
HSP, HFP, A2DP,
AVRCP, Intercom
Radio
Carrier frequency
2.402 - 2.480 GHz
Range
Up to 500m (open field)
RF output power
18dBm
Power
Power consumption
200mW (max)
Power input (charging)
5V / 400mA / 2W
Built-in battery
3.7V, 570mAh, Lithium-ion
Polymer (Rechargeable)
Music / talk time
Up to 10 hours
Standby time
400 hours
Profiles
HSP, HFP, A2DP,
AVRCP, Intercom
Temperature
Operation temperature
-28.9°C to +60°C
(-20°F to +140°F)
Charging temperature
0°C to +45°C
(+32°F to +113°F)
Storage temperature
-40°C to +80°C
(-38°F to +176°F)
Warnings and Safety Instructions
> Prolonged exposure to loud sounds may lead to permanent hearing damage.
> Do not attempt to place an outgoing call through the mobile phone while riding on the
motorcycle at any point of time.
> Please do not use the helmet communicator in any way that may distract you
or hinder your judgment while on the move. Never ever compromise your safety and the
safety of others.
Attention
> Charging and handling rechargeable battery products incorrectly may cause them to
overheat, catch fire or explode. To prevent this please follow the instructions below:
i) Never change the batteries yourself, always bring the device to an authorized dealer to
perform the replacement for you.
ii) When charging, use ONLY the charging cable provided or a replacement cable from the
> Never make any modifications to any part of the helmet communicator in any
> Do not modify your helmet to use with this system - it is not necessary to do so.
dealer. Using similar, compatible or any other cables may lead to permanent
product damage and will void the product warranty.
way as it may cause the system to malfunction causing hurt to you.
9
22
Features
State Status Indicator
1 Off (No Power)
-
2 On (BT* not connected)
Blink blue fast
3 On (BT* connected)
Blink blue slowly
4
Phone & Music device
Pairing mode
Blink blue & red alternately
5 Call in progress
Blink blue very slowly
6 In-coming call
Blink blue & red alternately
7 Battery low
Blink red every 2 seconds
8 Power down
Blink red 5 times
9 Intercom connected
Blink blue twice every 2 seconds
10
Intercom Pairing mode
(first unit)
Blink purple fast
11
Intercom Pairing mode
(subsequent unit)
Blink purple slowly
12 Battery charging
Solid Red
13 Battery fully charged
Solid Blue
14 Battery faulty
Solid purple
The helmet communicator has three main functions: to make mobile phone
calls, to listen to music and for intercom communication.
Mobile Phone Functions
• Bluetooth phone audio capabilities, HFP & HSP Profile.
• Voice activated call pick up.
Music Streaming Functions
• Bluetooth music streaming with hi-fi and stereo capabilities, A2DP Profile.
• Bluetooth Audio/Video Remote Control capability, AVRCP profile.
Intercom Functions
• Motorcycle to motorcycle or rider to passenger connection via two helmet
communicator up to 500m range.
Advanced Product Features
• Self adaptive intelligent noise cancellation algorithms ensure conversations on the go
are clear even in noisy environments.
• Voice controlled incoming call answering.
• The weather resistant engineered design ensures the possibility of communication
rain or shine.
• The integrated microphone array technology allows you to communicate without the
hassle of using boom microphones.
Status Indicator Configurations Summary
The table below shows the status indicator configurations.
* BT - Bluetooth
10
21
Button Configurations Summary
Action Button
Common Instruction Commands
Power on
Hold Answer for 2 seconds
Power off
Hold Answer for 5 seconds
Activate Bluetooth Pairing
Hold Up & Down for 2 seconds
Volume up
Press Up once
Volume down
Press Down once
Reset
Press Answer, Up & Down once
Voice Calling
Pick up incoming call
Press Answer once
End call in progress
Hold Answer for 2 seconds
Reject incoming call
Hold Answer for 2 seconds
Voice dial
Hold Answer & Down for 2 seconds
Last number redial
Hold Answer & Up for 2 seconds
Music Streaming
Play
Press Answer 2 times
Stop
Press Answer 1 time
Fast forward track
Press Up button 2 times
Backtrack
Press Down button 2 times
Intercomm
Pairing as helmet 1
(First Unit)
While unit is off, hold Answer and
Down for 3 seconds
Pairing as helmet 2
(Second Unit)
While unit is off, hold Answer and Up
for 3 seconds
Connect intercom
Hold Up for 2 seconds
Disconnect intercom
Hold Down for 2 seconds
Installation
The
1.
A
control unit
2.
A pair of hi-fi stereo headset with embedded microphones
3.
Velcro for speakers
4.
A metal mounting bracket with double sided tape
5.
A USB charging cable
6.
A User manual
HBC100 PLUS helmet communicator package contains :
HBC100 PLUS helmet communicator
11
20
Installation
GPS Device
Install Speakers
1.
Use the Velcro to install the
speakers into the ear cavity of the
helmet.
2.
The microphones MUST be placed
facing out.
3.
Left and right speakers must be installed
symmetrically.
4.
Make sure the speaker wire is inserted into the main unit.
lnsert the speaker wire into the control unit until you can no longer see the
3 ribs on the speaker wire plug.
Microphone
To use a GPS device with the UCLEAR HBC100 PLUS, the two must first be paired.
Pairing the HBC100 PLUS to a GPS Device
•Turn on the HBC100 PLUS helmet communicator and GPS device
•To connect the helmet communicator to a GPS device, hold the Up and Down buttons
for 2 seconds. This puts the helmet communicator into paring mode. The status indicator
would blink blue and red alternately.
•Next, turn on the GPS device Bluetooth functions and search for Bluetooth audio devices.
Select ‘HBC100 PLUS’ to pair with the desired device.
•If your GPS device prompts for a passcode, enter ‘0000’.
•Your GPS device will confirm that pairing has succeeded.
*Note: To make calls through the HBC100 PLUS, you may need to pair your mobile phone to
the GPS device by following the instructions of the GPS device.
19
12
Intercom Operations
Intercom, Phone Call and music Switching
All the intercom units can be connected to phone during operation.
Phone call has the highest priority. If you are currently in intercom mode, incoming call will
interrupt the intercom and after the phone call, intercom will be resumed immediately. If
you are currently having a phone call, incoming intercom request will be rejected.
Music has the lowest priority. If you are in music mode, incoming intercom request will stop
the music and you will be connected to intercom. If you need to switch from intercom to
music mode, you need to disconnect from the intercom by hold the Down button for
2 seconds, music will resume automatically after that.
Other Functions
Firmware Upgrade
•Please check out www.uclear-digital.com for new firmware update
Installation
Your
a metal mounting bracket. Use the brackets to install the HBC100 PLUS
control unit onto your helmet.
Install Metal Mounting Bracket
1.
Identify a position on the helmet to adhere the Metal
Mounting Bracket.
2.
Peel off the double sided tape protective film.
3.
Carefully place the Metal Mounting Bracket onto the position identified in step 1.
(You may only do this step once)
4.
Apply slight pressure onto the metal mounting bracket to ensure that the metal mounting
bracket is firmly secured.
5.
Make sure that permanent metal mounting clip is installed with the 2 side holes at the top
and the metal prong pointing down.
Install Main Unit
1.
Identify a position on the helmet to adhere the Metal Mounting Bracket.
2.
Slide main unit onto the bracket. You should hear a ‘click’ sound when fully inserted.
3.
Fully insert the speaker USB connector.
HBC100 PLUS helmet communicator package comes with
13
18
General Operations
Your
The operations described here
are applicable to all modes
of operations.
Power On
• Hold the Answer button for 2 seconds to power on the
helmet communicator. The status indicator will blink blue
and a power up tone can be heard.
Power Off
• To switch off the helmet communicator, press and hold the Answer button for 5 seconds.
The status indicator will blink red 5 times followed by a long beep before fully shutting
down.
Power Save Mode (Auto Power Off)
• If the intercom feature has been in use, and all Bluetooth devices have been disconnected,
the system will auto shutdown in 2 hour. If the intercom feature has not been in use and
the HBC100 PLUS is not connected to any other devices, the system will auto shutdown in
10 minutes.
Low battery
• When the battery level is low, the status indicator light will flash red twice every 2 seconds
while emitting a warning beep every minute.
HBC100 PLUS helmet communicator is now all set and ready to go!
Answer Button
Status Indicator
Up Button
Speaker/
Charging socket
Down Button
Intercom Operations
Two-Party Intercom
To use the intercom for the first time, you must pair your communicator to
another HBC100 PLUS unit.
Pairing process needs to be carried out only once.
Helmet 1 ( 1st device)
Hold Answer and Down Button
Pairing
•With both helmet communicators powered off, hold Answer and Down buttons on the first
unit until you see the red light, approximately 3 seconds, then release. Once the first unit
is blinking purple, hold down the Answer and Up buttons on the second unit until you see
the red light, then release.
•Both units will blink purple. When the first communicator’s status indicator turns blue,
press the answer button once on the second communicator to end the pairing process.
•When both unit s blink blue twice consecutively, the pairing process is successful.
•It is recommended to restart the devices after the pairing process.
Start Intercom
To enable the intercom, hold the Up button for 2 seconds.
Stop Intercom
To disable the intercom, hold the Down button for 2 seconds.
Helmet 2 ( 2nd device)
Hold Answer and Up Button
17
14
Music Streaming Operations
To use the helmet communicator with your music devices you must connect
them wirelessly through Bluetooth pairing. This step is only required for Bluetooth
music streaming devices.
Pairing
• To connect the helmet communicator to a Bluetooth music device, hold the Up
and Down buttons for 2 seconds. This puts the helmet communicator into pairing
mode. The status indicator will blink blue and red alternately.
• Next, put the Bluetooth music device into pairing mode. Both the helmet
communicator and the music device should automatically pair together.
After pairing the helmet communicator to a music device, you may use the helmet
communicator to wirelessly listen to music stored on the device.
In order to use the helmet communicator to remotely control the music, the music
device must have Bluetooth Audio/Video Remote Control capability, AVRCP profile.
Play
• To play music, press the Answer button 2 times.
Stop
• To stop music, press the Answer button 1 time.
Fast Forward
• To skip to the next track, press the Up button 2 times.
Backtrack
• To skip to previous track, press the Down button 2 times.
General Operations
Charging the Unit
• To charge the helmet communicator, connect the provided charging cable to the speaker/
charging socket. Upon charging, if the unit is on, the system will automatically initiate
power down.
Volume Control
• The volume control of the helmet communicator can be controlled using the Up and
Down buttons. Pressing the Up or Down button will increase the volume respectively.
The volume control for each mode is independent of each other.
Automatic Speaker Loudness (Communication only)
• The speaker loudness will be automatically adjusted depending on the environment
noise level. However you can still adjust the volume manually.
Automatic Pairing
• The helmet communicator has the ability to connect to the last paired device automatically
for two features
- music and mobile phone.
• Automatic pairing of the helmet communicator with music devices is dependent on the
music devices.
Automatic Profile Switch
• The helmet communicator supports multiple profiles concurrently, but at any point of time
only one profile is active. The automatic profile switch determines which profile should be
active at any point of time starting from the highest priority: (1) Mobile Phone functions
(2) Intercom functions and (3) Music functions.
• The helmet communicator can be paired to more than 1 device.
15
16
Mobile Phone Operations
To use the helmet communicator with your mobile phone for the first time, you must
first connect them wirelessly by pairing.
Pairing
•To connect the helmet communicator to a mobile phone, hold the Up and Down buttons for
2 seconds. This puts the helmet communicator into paring mode. The status indicator
would blink blue and red alternately.
•Next, turn on the mobile phone Bluetooth functions and search for Bluetooth devices.
Select ‘HBC100 PLUS’ to pair with the desired device.
•When prompted to enter a passcode, enter ‘0000’.
*Most mobile phones when paired would be automatically connected with both phone
and music Bluetooth capabilities.
After pairing the helmet communicator to your mobile phone, you may now use the
helmet communicator to answer your calls or make outgoing calls or listen to music.
Voice Activated Pick Up Calls
•When a call comes to the mobile phone, say ‘hello’ or ‘pick-up’ to answer the call OR
press the Answer button once.
Reject Calls
•To reject an incoming call or an incorrectly placed outgoing call, hold the Answer button for
2 seconds.
Voice Call
•To activate voice call, hold the Down and Answer buttons for 2 seconds. The accuracy of
this function is dependent on the mobile phone.
Mobile Phone Operations
Last Number Redial
•To redial the last number, hold the Up and Answer buttons for 2 seconds. The capability of
this function is dependent on the mobile phone used.
3 way calling
•Whilst on a call, if an incoming call comes in, you may answer the call by pressing the
Answer button once.
•To swap between 2 concurrent calls, press the Answer button once.
•To end a call during a 3 way call, holding the Answer button for 2 seconds would end the
active call. Upon terminating the active call, the call on hold would automatically be the
active call.
Music feature
•If the mobile phone supports A2DP/AVRCP profile, user may activate the music by playing
it directly from the phone or by controlling the music via the helmet communicator. To
operate refer to Music Streaming Operations section. Should the documented steps not
work, refer to the phone user manual on how to activate the A2DP/AVRCP feature.
Loading...