C027-U20/C20/G35
mbed enabled Internet of Things (IoT)
starter kit
User Guide
Abstract
This user guide explains how to set up the C027 starter kit to begin
developing Internet of Things applications for the u-blox LISA-U200,
LISA-C200 or SARA-G350 cellular and MAX-7Q positioning
modules.
www.u-blox.com
UBX-13004386 - R01
C027-U20/C20/G35 - User Guide
UBX-13004386 - R01 Page 2 of 10
Document Information
Title
C027-U20/C20/G35
Subtitle
mbed enabled Internet of Things (IoT) starter kit
Document type
User Guide
Document number
UBX-13004386
Revision, date
R01
20-Nov-2013
Document status
Objective Specification
Document status explanation
Objective Specification
Document contains target values. Revised and supplementary data will be published later.
Advance Information
Document contains data based on early testing. Revised and supplementary data will be published later.
Early Production Information
Document contains data from product verification. Revised and supplementary data may be published later.
Production Information
Document contains the final product specification.
This document applies to the following products:
Name
Type number
Firmware version
PCN / IN
C027-U20
C027-U20-0-00
N/A
N/A
C027-C20
C027-C20-0-00
N/A
N/A
C027-C20
C027-C20-1-00
N/A
N/A
C027-G35
C027-G35-0-00
N/A
N/A
This document and the use of any information contained therein, is subject to the acceptance of the u-blox terms and conditions. They can
be downloaded from www.u-blox.com.
u-blox makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes
to specifications and product descriptions at any time without notice.
u-blox reserves all rights to this document and the information contained herein. Reproduction, use or disclosure to third parties without
express permission is strictly prohibited. Copyright © 2013, u-blox AG.
Trademark Notice
u-blox® is a registered trademark of u-blox Holding AG in the EU and other countries.
ARM® is the registered trademark of ARM Limited in the EU and other countries.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
All other registered trademarks or trademarks mentioned in this document are property of their respective owners.
C027-U20/C20/G35 - User Guide
Contents
UBX-13004386 - R01 Objective Specification Page 3 of 10
Contents
Contents .............................................................................................................................. 3
1 Starting up .................................................................................................................... 4
1.1 C027-U20/C20/G35 pin definition ........................................................................................................ 5
1.2 C027-U20/C20/G35 block diagram ...................................................................................................... 6
1.3 C027 starter kit BoM ............................................................................................................................ 6
1.4 Features ................................................................................................................................................ 6
1.4.1 Cellular and GNSS modules ............................................................................................................... 6
1.4.2 Main CPU ......................................................................................................................................... 6
1.4.3 Interfaces and electrical data ............................................................................................................. 6
1.5 C027-U20/C20/G35 connectors ........................................................................................................... 7
1.6 LEDs ..................................................................................................................................................... 7
2 Getting started with mbed .......................................................................................... 8
2.1 Board setup and settings ...................................................................................................................... 8
2.2 Board power supply .............................................................................................................................. 8
2.3 Windows serial configuration ............................................................................................................... 8
2.4 Board interface settings ........................................................................................................................ 8
2.5 Getting started with mbed ................................................................................................................... 8
Related documents............................................................................................................. 9
Revision history .................................................................................................................. 9
Contact .............................................................................................................................. 10
Loading...