Ubiquiti nanoHD-RetroFit-3 User Manual

RetroFit Mount

Model: nanoHD-RetroFit-3

Introduction

Thank you for purchasing the Ubiquiti Networks®

UniFi®nanoHD AP RetroFit Mount. This Quick Start Guide

is designed to guide you through installation and includes

warranty terms.

Package Contents

Retrofit Bracket

Installation Requirements

• UniFi nanoHD AP with Mounting Bracket (sold separately)

• Refer to the UAP-nanoHD Quick Start Guide for AP

installation requirements

Hardware Installation

1. Feed the Ethernet cable through the hole of the Retrofit
Bracket.

2. Align the arrow on the Retrofit Bracket with the arrow on
the Mounting Bracket.

3. Attach the Retrofit Bracket to the Mounting Bracket and then
rotate the Retrofit Bracket clockwise until it locks into place.

4. Connect the Ethernet cable to the UniFi nanoHD AP.