Ubiquiti MPOWER User Manual
mFi Power Strip
Model: mPower
Introduction
Introduction
Thank you for purchasing the Ubiquiti mFi™ mPower™.
The mPower is a power strip with Wi-Fi capability that is
designed for use with the Ubiquiti mFi platform. Once
connected, you can use the mFi Controller software to
define rules using your web browser. Rules detail what
actions occur when trigger conditions are met.
Package Contents
Wall Mount Slide
mPower Mounting
mFi Power Strip
Model: mPower
Plate
mFi Controller Software
Quick Start Guide
Version 1.0
Application Support
Windows XP
Windows Vista
Windows 7
Mac OS X
Screws
(Qty. 2)
Quick Start Guide CD-ROM
System Requirements
• Wi-Fi Network
• Drill with 6 mm Drill Bit (Optional for Wall-Mount)
• Phillips Screwdriver
Anchors
(Qty. 2)
1
mFi™ mPower™ Power Strip
Hardware Overview
Status LED
2
Reset Button
Circuit Breaker
Reset Button
Hardware Overview
Status LED The Status LED has two different states:
The Status LED will light
yellow when the mPower
is first powered on in
factory default mode out
of the box.
The Status LED will light
blue when the mPower
has been successfully
integrated into a network
and is working properly.
Reset Button The Reset button serves two functions:
• Restart Restarts the device when you press and release
it quickly.
• Restore Factory Defaults Press and hold until the LED
alternates colors and then remains steady yellow to
restore the device to the factory default settings.
Circuit Breaker Reset Button When excessive current
triggers the circuit breaker, the entire unit will be powered
off, including the LED. Press this button to reset the unit.
The LED will flash briefly and the unit will power back on.
3
mFi™ mPower™ Power Strip
Hardware Installation
The mPower Power Strip includes an optional mounting
plate.
Wall-Mount
1. Position the Mounting Plate on the wall with the text in
the proper orientation, and mark the mounting holes
on the wall.
Wall Mount Slide
2. Use a 6 mm drill bit to drill the holes.
3. Insert the anchors into the holes and use a Phillips
screwdriver to secure Screws through the Mounting
Plate into the Anchors.
4
Hardware Installation
4. Align the back of the mPower Power Strip with the
Mounting Plate. Slide the Power Strip to the right to
lock it into place.
5
mFi™ mPower™ Power Strip
Software Installation
Insert the mFi Controller software CD into your CD-ROM drive
and follow the instructions for your specific computer type.
Mac Users
1. Click the Install icon.
2. Click Continue and follow the on-screen instructions
to install the software.
6
Software Installation
3. Go to Go > Applications and double-click the mFi
icon.
Proceed to Configuring the mFi Controller Software on page 9.
PC Users
1. Launch mFi-installer.exe.
2. Click Install.
7
Loading...