NanoBridge®, Ubiquiti Networks
pioneered the all-in-one design for an
airMAX® product functioning as a CPE
Datasheet
(Customer Premises Equipment). Now
Ubiquiti Networks launches the latest
generation of CPE, the NanoBeam®.
Application Examples
PtMP Client Links
Improved Noise Immunity
Available for the 2.4 and 5GHz
frequency bands, the NanoBeam
directs RF energy in a tighter
beamwidth. With the focus in one
direction, the NanoBeam blocks or
spatially lters out noise, so noise
immunity is improved. This feature
is especially important in an area
crowded with other RF signals of the
same or similar frequency.
Integrated Design
The Ubiquiti® Research and
Development team combined the
radio and antenna to create a more
efcient and compact CPE. The
NanoBeam gets maximum gain out of
the smallest footprint.
The NanoBeam used as a CPE device for each client in an airMAX PtMP network.
Wireless Client
PtP Link
Providing increased performance from
its faster processor and innovative
mechanical design at a low cost, the
NanoBeam is extremely versatile and
cost-effective to deploy.
airMAX Technology Included
Unlike standard Wi-Fi protocol,
Ubiquiti’s Time Division Multiple
Access (TDMA) airMAX protocol
allows each client to send and receive
data using pre-designated time
slots scheduled by an intelligent AP
controller.
This time slot method eliminates
hidden node collisions and
maximizes airtime efciency. It
provides signicant performance
improvements in latency, throughput,
and scalability compared to all other
outdoor systems in its class.
Intelligent QoS Priority is given to
voice/video for seamless streaming.
Scalability High capacity and
scalability.
Long Distance Capable of
high-speed, carrier-class links.
The NanoBeam as a powerful
wirelessclient.
airMAX TDMA Technology
Timeline
Time Slots
Time Slot 1
Use a NanoBeam on each side of a
PtPlink.
Time Slot 2
Time Slot 3
Time Slot 4
Data
VOIP
Up to 100 airMAX stations can be connected to an airMAX Sector; four airMAX
stations are shown to illustrate the general concept.
2
VOIP
VOIP
Page 3
Software
airOS® is an intuitive, versatile,
highly developed Ubiquiti rmware
technology. It is exceptionally
intuitive and was designed to require
no training to operate. Behind
the user interface is a powerful
Integrated on all Ubiquiti M
products, airView® provides
advanced spectrum analyzer
functionality: waterfall, waveform,
and real-time spectral views allow
operators to identify noise signatures
and plan their networks to minimize
noise interference.
• Waterfall Aggregate energy over
time for each frequency.
• Waveform Aggregate energy
collected.
• Real-time Energy is shown in real
time as a function of frequency.
• Recording Automate airView to
record and report results.
airControl® is a powerful and
intuitive, web-based server network
management application, which
allows operators to centrally manage
entire networks of Ubiquiti devices.
• Network Map
• Monitor Device Status
• Mass Firmware Upgrade
• Web UI Access
• Manage Groups of Devices
• Task Scheduling
3
Page 4
Hardware Overview
Innovative Mechanical Design
• All-in-one design The NanoBeam provides both the
radio and antenna in the smallest possible footprint.
Datasheet
• Quick and easy installation No fasteners are
required for pole-mounting, and a single wall fastener
(not included) is required for wall-mounting.
• Convenient alignment The NanoBeam pivots on its
ball joint for easy aiming.
Compact Form Factor
• Efcient footprint The radio and antenna are combined into
a single body that takes up minimal space.
• Versatile mounting The NanoBeam can be mounted in
almost any position needed for line of sight.
• Aesthetics The NanoBeam is small enough to blend
discreetly into the background at a customer's location.
Lock Ring
Ball Joint Mount
NBE-M5-19 with Mounting Hardware
Optional Isolator Shield Accessory
ModelNBE-M2-13NBE-M5-16NBE-M5-19
ISO-BEAM-16
ISO-BEAM-19
An RF isolator shield is available as an optional accessory to
enhance signal isolation.
ü
üü
Installation Using the IsoBeam
4
™
Page 5
Optional Mounting Accessories
ModelNBE-M2-13NBE-M5-16NBE-M5-19
NBE-WMK
A wall mount kit is available as an optional accessory to enhance
stability for wall-mounting.
Installation Using the NanoBeam Wall Mount Kit
üüü
Datasheet
ModelNBE-M2-13NBE-M5-16NBE-M5-19
NBE-16-WM
NBE-19-WM
A suction cup mount is available as an optional accessory to
mount the NanoBeam on a window.
Installation Using the NanoBeam Window Mount
üü
ü
5
Page 6
Specications
NBE-M2-13
Dimensions189 x 189 x 125 mm (7.44 x 7.44 x 4.92")
Weight0.530 kg (1.17 lb)
Datasheet
Power Supply24V, 0.5A PoE
Max. Power Consumption6W
Operating Frequency2405 - 2475 MHz
Gain13 dBi
Networking Interface(1) 10/100 Ethernet Port
Processor SpecsAtheros MIPS 74Kc, 560 MHz
Memory64 MB DDR2, 8 MB Flash
LEDs(1) Power, (1) LAN, (4) WLAN
Signal Strength LEDsSoftware-Adjustable to Correspond to Custom RSSI Levels
Channel Sizes5/8/10/20/30/40 MHz
PolarizationDual Linear
EnclosureOutdoor UV Stabilized Plastic
MountingPole-Mount (Kit Included), Wall-Mount
Wind Loading 45.4 N @ 200 km/h (10.2 lbf @ 125 mph)
Wind Survivability200 km/h (125 mph)
ESD/EMP ProtectionAir: ± 24 kV, Contact: ± 24 kV
Operating Temperature-40 to 80° C (-40 to 176° F)
Operating Humidity5 to 95% Noncondensing
Wireless ApprovalsFCC, IC, CE
RoHS ComplianceYes
Salt Fog TestIEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
Vibration TestIEC 68-2-6
Temperature Shock TestIEC 68-2-14
UV TestIEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4
Wind-Driven Rain TestETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5
airView, NanoBeam, and NanoBridge are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. All
other trademarks are the property of their respective owners.
www.ubnt.com
JL030316
11
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.