Ubiqconn Technology GN01 Users Manual
2-IN-1 Snap On module
UUGG
2222----IN
2
IN ----1SNAP ON MODULE
1SNAP ON MODULE User Guid
ININ
1SNAP ON MODULE1SNAP ON MODULE
eeee
User Guid
User GuidUser Guid
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.
2222----IN
3
IN ----1SNAP ON MODULE
1SNAP ON MODULE User Guid
ININ
1SNAP ON MODULE1SNAP ON MODULE
eeee
EEuurrooppee –– EEUU DDeeccllaarraattiioonn ooff CCoonnffoorrmmiitty
This device complies with the essential requirements of the
R&TTE Directive 1999/5/EC and EMC directive 2004/108/EC. The
following test methods have been applied in order to prove
presumption of conformity with the essential requirements of the
R&TTE Directive 1999/5/EC and EMC directive 2004/108/EC:
<
EN 55022: 2010 + AC: 2011
<
EN 61000-3-2 : 2006 + A2 2009
<
EN 61000-3-3 : 2008
<
EN 55024: 2010
(IEC 61000-4-2: 2008;
IEC 61000-4-3: 2010;
IEC 61000-4-4: 2012;
User Guid
User GuidUser Guid
y
IEC 61000-4-5: 2005;
IEC 61000-4-6: 2008;
IEC 61000-4-8: 2009;
IEC 61000-4-11: 2004)
<
EN 60950-1: 2005 + A1
Safety of information technology equipment
<
EN 300 328 V1.7.1: 2006
<
EN 302 291 -1/ -2
<
EN 62311: 2008
2222----IN
4
IN ----1SNAP ON MODULE
1SNAP ON MODULE User Guid
ININ
1SNAP ON MODULE1SNAP ON MODULE
eeee
User Guid
User GuidUser Guid
Specification
The 2-IN-1SNAP ON MODULE is a flexible, With following specifications
that can be applied in diverse operational environments and implemented
in multi-faceted applications.
Barcode Scanner :
< Decoded Mode :
1D Symbologies : EAN/UPC, RSS, Code 39, Code 128,
UCC/EAN 128, ISBN, ISBT, Interleaved, Matrix, Industrial
and Standard 2 of 5, Codabar, Code 93/93i, Code 11, MSI,
Plessey, Telepen, postal codes.
2D Symbologies: Data Matrix, PDF417, Micro PDF 417,
Maxicode, QR, Aztec, EAN.UCC composite.
GPS :
< Channel :
50 channel all-in-view tracking
GPS,GLONASS support
1 x Signal Color LED (Blue)
CAC :
Supports ISO/IEC 7816 standard
Supports PC Smart Card industry standard: PC/SC 1.0 & 2.0
Works with 5V, 3V and 1.8V Smart cards
Loading...