Ubio Labs AWC1046 User Manual

WCB128 User Manual Material 80G woodfree paper Process: 1c/1c
k=100
Wireless Charger
with Apple Watch Module
User Manual and Safety Instructions
FCC ID: 2ATGY-AWC1046
Warranty
At Ubio Labs, we are dedicated to designing and manufacturing products with superior performance and 100% customer satisfaction. All of our products come with a 1 year limited warranty from date of purchase.
We are always improving our products’ features and functionality. We reserve the right to change product specifications at any time without notice.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Wireless Charger
1
23
4
5
Features
1 ) Battery Charge Indicator 2 ) Qi Surface 3 ) Apple Watch Module 4 ) DC in
5) Dual USB-A Outputs
Technical Specications
Model: AWC1046 Input: 15V/3.5A 4mm coaxial input Output 1: 2x Qi (10W / 7.5W / 5W) Output 2: Apple Watch Magnetic Charging Module Output 3: 2 x USB-A 12W (5V/2.4A) Compatibility: iPhone® X X , iPhone 8, iPhone 8 Plus Charge Indicator: White/amber LED indicator Dimensions: 0.50 x 8.6 x 4.13 inches W eight: 10.6 oz.
, iPhone X Max, iPhone
Important Safety Instructions
WARNING - When using this product, basic precautions should always be followed, including the following: a) Read all manufacturers instructions before using this product. b) To reduce the risk of injury, close supervision is necessary when the product is used near children. c) Do not put fingers or hands into the product. d) Do not expose wireless stand to moisture, rain, or snow.
) Use of a power supply or charger not
e recommended or sold by wireless stand manufacturer may result in a risk of fire or injury to persons. f) Do not use the wireless stand in excess of its output rating. Overloaded outputs above rating may result in a risk of fire or injury to persons.
g) Do not disassemble the wireless stand. Take it to a qualified service person when service or repairs are required. Incorrect reassembly may result in a risk of fire or injury to persons. h) Do not expose the wireless stand to fire or excessive temperature. Exposure to fire or temperature above 122°F may cause explosion. The wireless stand’s working temperature is 104°F. i) Have service performed by a qualified repair person using only identical replacement pa This will ensure that the safety of the product is maintained. This device complies with Part 15 of the FCC Rules. NOTE: This equipment has been tested and found to comply with the limits for a wireless power
charger, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequenc and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
y energy and, if not installed
rts.
Wall Adapter
Folding Wall Prongs
6 Ft. Cable
Technical Specications
Model: CHG1096 Input: AC 110-240V, 50-60 Hz Output: 52.5W 15V/3.5A Dimensions: 2.28 x 2.28 x 1.06 inches W eight: 3.35 oz.
DO NOT RETURN TO THE STORE
Our customer service team is here to help.
Model: WCB123
www.ubiolabs.com support@ubiolabs.com 1-866-642-4428 (Monday - Friday 9am - 4:30pm PST) 2821 Northup Way, Suite 250 Bellevue, WA 98004
SAVE THESE INSTRUCTIONS
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.
This dev
ice contains licence-exempt
transmitter(s)/receiver(s) that comply with Innovation,
Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncont environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
iPhone and Apple Watch are a trademark of Apple Inc., registered in the U.S. and other countries. Samsung is a trademark of Samsung Electronics Co., Ltd. Android is a trademark of Google LLC. LG is a registered trademark of LG Corp. Sony is a registered trademark of Sony Corporation. Motorola is a registered trademark of Motorola Trademark Holdings, LLC.
measures:
rolled
Loading...