Uberlux Helios User Manual

USER MANUAL

TABLE OF CONTENTS

Welcome to Helios by UberLux

We are pleased that you have chosen an innovative product from
the UberLux family. The Helios light panel features the latest
in LED technology with adjustable brightness controls. Its low­maintenance, slip and impact-resistant surface is well suited for
use in areas where oils, greases, and fuels (e.g., brake cleaner,
gasoline, diesel, hydraulic fluids, solvents, etc.) are used.

Welcome to Helios by UberLux 1

Important safety information 2

Intended use 3

Getting to know your Helios 4

Assembly 6

Technical data 6

Cleaning 7

Servicing program 7

Disposal 7

Important information 7

Warranty 8

Questions? 11

NOTE: Please read this entire manual carefully before use. Use of

product constitutes acceptance of warranty terms and conditions. We
also recommend keeping the device's original packaging for storage or
transport at a later date if needed.

Included in the boxes:

• Helios light panel

• Connection cable (5M/16')

• Control box

• Power cord

• Quick start guide

Prior to using your Helios:

• Inspect the package thoroughly, ensuring that there are

no signs of damage.

• Ensure that the Helios light panel, connection cable,

control box, and power cord are fully intact.

• DO NOT operate your Helios light panel if there are any

signs of equipment damage.

If you are unsure whether your device may be damaged, please
contact our support team at 317.593.5939 or [e-mail].

12

Important safety information

Observe the following during assembly and operation to
protect your device from damage:

• Helios Light panel may only be serviced or repaired by

authorized service personnel. Never open the control box
or light panel yourself.

• Only connect approved accessories.

• Do not use the connected cable to lift your Helios light

panel, as damage to cable may occur, which is not covered
under warranty. Instead use the notched areas provided

(located at the sides of the device, as shown on page four).

• Only connect cables to the intended sockets and

connection ports (reference assembly instructions).

Observe the following during assembly and operation to
protect yourself from personal injury.

• To prevent the risk of electric shock:

- Do not submerge.

- Never touch the power connector with a sharp

or metallic object.

- Never connect or disconnect cables or
AC adapters during a thunderstorm.

- Never connect or disconnect cables or
AC adapters with wet hands.

- Avoid walking upon your Helios if its surface
is wet as this poses a slip threat. Remove all fluids
from top lens prior to stepping on the panel.

- UberLux is not responsible or liable for injuries,
personal or otherwise, that arise due to Helios
being used in unintended manners.

Intended use

The Helios light panel serves to illuminate working areas such
as workshops, showrooms, or production plants. When placed
on a level surface, Helios can be walked upon and driven upon
by vehicles.

NOTE: UberLux is not deemed liable for damage caused by
any use of Helios that does not comply with its intended use.
Observe all instructions regarding handling and safety provided
in this user manual.

UberLux is not liable for any injuries arising or resulting from
improper securing of cables.

• To prevent the risk of tripping or falling:

- Place connection cables in a well-marked or
well-secured/concealed location.

- Be mindful of loose or missing anti-skid pads,
when detached they pose a slip threat.

2

32