U S E R ’ S M A N U A L
Contents
C2104001
BCM 43224 WiFi Card
SECTION ONE:
1. INTRODUCTION............................................................................................................................... 3
1.1 S
COPE
1.2 F
UNCTION
1
INTRODUCTION............................................................................................3
...........................................................................................................................................3
......................................................................................................................................3
2 PRODUCT SPECIFICATION ........................................................................................................... 4
2.1 H
ARDWARE SPECIFICATION
.......................................................................................................... 4
3. PRODUCT REQUIREMENTS......................................................................................................... 4
3.1 H
ARDWARE REQUIREMENTS
3.2 H
ARDWARE ARCHITECTURE
4 FCC NOTICE ......................................................................................................................................6
END PRODUCT LABELING...............................................................................................................6
MANUAL INFORMATION THAT MUST BE INCLUDED ...................................................... …..7
......................................................................................................... 4
......................................................................................................... 4
The information contained in this manual has been verified at the time of this manual printing. The
manufacturer reserves the right to make any changes and improvements in the product described in this
manual at any time and without notice.
All registered trademarks are the property of their respective owners.
2
HON HAI PRECISION IND. CO., LTD.
Section One: Introduction
1. Introduction
Project Name: 802.11a/b/g/n (2x2) card based on IC BCM43224 with BGA package.
The typical use model for this embedded device is to allow the client device to be
connected to an 802.11a/b/g/n 2x2 wireless network with infrastructure mode or to
serve as an ad-hoc (peer-to-peer) data path.
1.1 Scope
The Wireless BCM43224 is an available 11n solution in the 2.4/5GHz band, compatible with the IEEE
802.11a/b/g/n. The 802.11 a/g data rate provides for 54, 48, 36, 24, 18, 12, 9, 6Mbps, and 802.11b data rate
provides for 11, 5.5, 2, 1Mbps. In addition, 11n provide MCS8~MCS15 for HT20 which PHY data rate up to
150Mbps; also provide MCS8~MCS15 for HT40 with data rate up to 300Mbps.
1.2 Function
• RoHS and Green Compliant.
• 802.11a/b/g/n 2x2 based on BCM43224.
• PCI-E Half Mini Supported.
• Module is powered by the host with a 3.3V +/- 10% supply (55mVpp ripple).
• Module’s clock source is provided by the on board XTAL Oscillator of 20 MHz (+/-
10ppm).
• JTAG connector will be provided for FA and debug.