UAT AD 1130 User Manual

EXHIBIT C

User Manual

Installation Guide For UAT ADSL USB Modem

ADSL USB NIC User Manual

Revision 1.0

01-10-2001

This document contains confidential information and is

proprietary to UAT Inc.

No part of this document may be reproduced in any form or by any means

without the prior permission of UAT Inc.

All specifications are subject to change without notice.

UAT Inc.

2F, No.5, Alley22, Lane 513, Jui Kuang Rd,

Nei Hu, Taipei

Taiwan, R.O.C
Tel: [phone]
Fax: [phone]

1

Installation Guide For UAT ADSL USB Modem

Welcome to ADI USB ADSL Modem!

Introduce yourself to the new world of fast Internet. ADI provides a whole new fast and
simple plug-n-play Universal Serial Bus (USB) Windows environment for Internet access.

The ADI ADSL USB Modem contains a complete evaluation package including hardware
reference design, Windows software drivers, test/utility software, design documents,
performance reports and this user manual.

The manual is written based on the ADI ADSL USB Modem hardware release Version 3.1.3,
the software release Version Alpha01 and the ADIMON GUI Ve rsion 2.5.

The ADI ADSL USB Modem features:

?? Plug and Play USB 1.1 specification interface
?? Rate Adaptive ADSL technology that adapts to your phone line conditions
?? Receive line rate up to 10Mbps (downstream) and transmit line rate up to 1Mbps

(upstream)

System Requirements

To use the USB Modem, your PC or notebook should have:

?? Pentium 233MHz CPU or faster
?? 32MB system memory or more
?? 3MB free space on your hard drive
?? 256 color VGA or higher resolution
?? Microsoft Windows 98 or Windows 98 Second Edition CD-ROM
?? Floppy drive and CD-ROM drive
?? One available USB port and one USB cable
?? RJ11 phone wire
?? DSLAM or central office modem ready

The shielded USB cable is to be used in order to ensure compliance with FCC Part 15,

and it is the responsibility of the user to provide and use shielded USB cable from modem
to personal computer.

CAUTION: Any changes of modifications not expressly approved by the grantee of this

device could void the users authority to operate the equipment.

Document Annotations

Important Instruction

Special Note

2

Installation Guide For UAT ADSL USB Modem

Hardware Installation

Familiarizing yourself with your USB ADSL Modem

Your modem has one RJ-11 phone jack and USB cable jack receptacle for data connection.
POTS splitters or microfilters can be required to work concurrently with conventional POTS
equipment such as phone, fax and V.90 modem. Various LEDs display modem status.

Installing the ADSL USB modem

To install the modem:

1. Turn on your computer and run Windows 98.

2. Plug USB cable from main computer to modem.

3. Connect your modem using standard phone wire and plug the other side of the wire

to your house phone jack which is connected to central office modem provided by
service provider.

4. Windows USB plug-n-play feature should automatic ally recognize the modem and ask for

software installation.

3

Installation Guide For UAT ADSL USB Modem

Driver Install

To install the drivers for Windows 98, plug the modem to system using USB cable before
power up the PC or after Windows is running:

1. Windows 98 PnP detects the USB modem USB devices. Click on “Next” from below

screen.

2. Let Windows 98 search for the best driver.

4

Installation Guide For UAT ADSL USB Modem

3. Select floppy disk or CD-ROM (recommended) which contain “E:/ driver/USB/00-12-20/

cpe sw ndis sw ndis usb alpha01 for Windows 98 to install the USB firmware loader.

Click on “Next” to continue.

4. Windows 98 detects the ADI USB firmware loader. Click on “Next” to continue.

5. Click on “Finish”. ADI firmware is being loaded into the system.

5

Installation Guide For UAT ADSL USB Modem

6. Click on “Yes” to re start the PC.

7. Next is to install the ADI USB modem device driver “ADIUSBAE” into the system.
Windows 98 PnP automatically detects the modem and click “Next” to continue.

8. Let Windows 98 search for the proper device driver.

6