Tzora EasyTravel Elite Original instructions

EasyTravel

Elite

User's Manual

(28-73-902)

Original instructions

EasyTravel Elite – ET1-E User’s Manual (US) Rev. 2019-01 en 2

Table of contents:

Page

1.

Introduction

4

2.

Safety

4

3.

System Components

5

4.

Assembly and Folding Instructions

7

5.

Operating Your EasyTravel Elite

10

6.

Moving and Transporting Your EasyTravel Elite

14

7.

Helpful Hints for Everyday Use

16

8.

General Maintenance and Inspection

17

9.

EMI – Electromagnetic Interference

19

10.

Fault Finding

24

11.

Disposal and Recycling

25

12.

Technical Data

26

NOTE: Design details may change without notice.

EasyTravel Elite – ET1-E User’s Manual (US) Rev. 2019-01 en 3

1. INTRODUCTION

The EasyTravel Elite is a “Class A” Electrically powered scooter. It is

intended to be used by individuals that are able to walk, but suffer from mild

mobility limitations. The user must have sufficient arm and leg strength to get

on and off the EasyTravel Elite alone and to safely steer under all driving

conditions.

The EasyTravel Elite is intended for indoor and restricted outdoor use on

pavements or paved footpaths only during daylight hours. The EasyTravel

Elite does not have lights and reflectors and therefore must not be used in

the dark or in limited visibility conditions.

CAUTION: Failure to follow the instructions contained in this manual may

result in injury to the user or to other persons.

2. SAFETY

During your initial use of the EasyTravel Elite we recommend caution as you

practice operating the unit in various situations. Keep the speed at a reduced

level until you are comfortable controlling the scooter. Follow the safety tips

and instructions and you will be comfortable maneuvering through doorways,

on and off lifts, over moderate terrain and up and down ramps.

These safety considerations and tips will help you to operate the EasyTravel

Elite safely. The EasyTravel Elite is a powerful electric vehicle; these rules

will help you prevent personal injury and damage to your scooter.

1. Read this manual and all labels before operating.

2. Do not carry passengers or exceed the maximum weight capacity.

3. Do not mount or dismount the EasyTravel Elite unless it has come to a

full stop and is turned off.

4. Do not back up on to uneven inclines or surfaces.

5. Always switch the speed selector to low when driving in a confined space.

6. Always reduce speed when turning.

EasyTravel Elite – ET1-E User’s Manual (US) Rev. 2019-01 en 4

7. Do not operate your scooter when under the influence of alcohol,

1. Battery pack (detachable)

11. Rear wheel

2. Front column (detachable)

12. Folded frame lock/release pin

3. Column lock/release triggers

13. Unfolded frame lock/release pin

4. Controller cover

14. Utility basket (holding capacity

5. Charging socket (Fig. 1A)

20lbs/9kg)

6. Front drive wheel

15. Charger and connecting cables

7. Foot platform

(Fig. 1B)

8. Seat shell

16. Control Panel

9. Seat cushions

17. Freewheel switch

10. Foldable armrests

18. Supporting Wheels

Figure 1

medications or drugs that may impair your safety.

8. Always keep your feet on the foot platform when driving.

9. Do not sit on the scooter while being transported in a moving vehicle.

Always fold down and secure your EasyTravel Elite and transfer yourself

to a vehicle seat.

3. SYSTEM COMPONENTS AND DETAILS

3.1. EasyTravel Elite parts – (Figure 1)

EasyTravel Elite – ET1-E User’s Manual (US) Rev. 2019-01 en 5

Figure 3

3.2. Control Panel – (Figure 2)

1. Switch

2. Hand control lever (right and left)

3. Speed adjusting knob

4. Indicator light (LED)

5. Battery Gauge

6. Hand-grips

3.3. EasyTravel Optional Accessories:

1. Extra battery pack.

2. Optional Battery Charger (Fig.3) where
Lithium Batteries are used.

WARNING: Where both lead/acid and Lithium
batteries are being used, the user must take
extra care to use the correct charger for the
specific battery being charged.

BELL: If the user requires an audible warning device, a standard bicycle bell
can be attached to the handlebar.

EasyTravel Elite – ET1-E User’s Manual (US) Rev. 2019-01 en 6

ASSEMBLY AND FOLDING INSTRUCTIONS

3.4. Assembling your EasyTravel Elite.

Unfolding Rear Frame

Pull on the folded frame lock pin ring (Fig.

4/1) to release the foot platform and

unfold the frame. Pull the seat backrest

(Fig. 4/2) and lift it to the upright position.

Ensure that the unfolded frame lock pin

secures the platform in the horizontal

position.

Unfolding Front Column

Pull the column lock triggers (Fig. 4/3)

upward towards the handle to release the

tilt lock. Move the drive unit away from

the column (all the way) to open the

quick-release housing.

This is the column “detach” position.

Connecting The Front Column To The

Rear Frame

Position the column in the “detach”

position. Lift the front of the Foot platform

and insert connection pin into the quick-

release housing on the drive unit. This

may be done without bending down by

lifting the front of the seat “lip” while

holding the front column hand-grip as

shown in Fig. 5.

EasyTravel Elite – ET1-E User’s Manual (US) Rev. 2019-01 en 7

Front Column Adjustment (Figure 6)

To adjust the angle of the front column,

pull the column lock triggers upward.

Move the column into the desired position

and release. Push lightly back and forth

on the column to ensure that it is locked

in the desired position.

1. For driving the EasyTravel Elite,

adjust column to one of the two the

rear-most positions.

2. For getting in and out of the

EasyTravel Elite seat comfortably,

the column may be moved away from

the seat to the entry/exit position.

3. For detaching the front column from

the rear frame, adjust the column

fully forward to the detach position

(Fig. 6/3); remove battery before

adjusting the column to the detach

position.

CAUTION: When getting in and out of the EasyTravel Elite seat, step only

on CENTER of foot platform. DO NOT STEP ON SIDE OF FOOT

PLATFORM to avoid tipping the EasyTravel Elite.

NOTE: The rear frame, when folded, can be lifted by the handles (Fig 4/4).

EasyTravel Elite – ET1-E User’s Manual (US) Rev. 2019-01 en 8

3.5. Folding and Unfolding your EasyTravel Elite

Folding the EasyTravel Elite

Step 1: Fold backrest of seat down (Fig. 7/1)
Step 2: Hold handgrip of front column (Fig. 7/2) in the “Operating” or

“Entry/Exit” position and push forward away from seat to fold

platform upwards.

Step 3: Grasp platform

handle (Fig. 7/3)
and pull column
lock triggers (Fig.
7/4) to fold column
towards the
platform. Fold
together until
folded frame lock
pin (Fig. 7/5) and
column latch (Fig.
7/6) click into
place and hold EasyTravel Elite in folded position.

Unfolding the EasyTravel Elite

Step 1: Pull on the frame lock pin ring (Fig. 8/1) to release platform and rest

front wheels on floor.

Step 2: Pull the seat

backrest and lift it
upright. (Fig. 8/2)

Step 3: Grasp top of seat

backrest (Fig. 8/3)
and pull column
lock triggers (Fig.
8/4) to release
column from
platform. Pull
outwards to unfold
EasyTravel Elite
until platform and column lock into the operating position.

EasyTravel Elite – ET1-E User’s Manual (US) Rev. 2019-01 en 9