Tysso PRP-350 Quick Installation Manual
PRP-350
Kitchen Thermal Printer
Quick Installation Guide
Front
TOP Bottom
Rear
Right
Product Overview
Specification
Contents
* Power Cord is selectable depending on the types of electrical plug.
** Printer cable is selectable depending on the interface required
(RS-232 or RJ-45)
*** RJ-45 cable is not supplied and need purchased separately.
Please refer to the nearest local representatives for further information.
HOST PC
Printer
Power Cord
Printer Cable
Power Cord
RS-232RJ-45
Paper Roll
and
Paper Roll Holder
Installing your Printer
Installing the Paper Roll
Printer Unit *Power Cord
**Printer Cable
Paper Roll
Paper Roll
Holder
Quick Installation
Guide
Utility CD
Left
Printer
I/O Port Cover
Cover Release Lever
Warning: Paper Cutter
Beware of the Paper Cutter while
installing or replacing the paper roll.
The sharp edge of Paper Cutter may
cause injury to operator
Pull out the paper
Paper Cutter
Printer Cover
Keep holding and slowly replace the
Print Cover; press it into position with
care.
Make sure the cover is firmly closed.
Model PRP-350
General
Print Method Thermal line printing
Print Speed 250mm/sec
Print Life 150 Km
Print Font (ASCII)
ANK Font
Font A: 12 x 24 dots, Font B: 9 x 17 dots
Print Font (Graphic )
Chinese character: 24 x 24 dots
Print Resolution
576 dots/line or 512 dots/line
Print Font Character Support
International Font, Big 5 Chinese, GB Chinese,
Japanese, Korean selectable
Character Per Line 48 (Font A) / 42(Font B)
Barcode Support
UPC-A, UPC-E, JAN-13/EAN-13, JAN-8/EAN-8, CODE 39, ITF,
CODABAR, CODE 93, CODE 128, QR CODE
Effective Print Width 72mm
Paper Width
79.5mm± 0.5mm
Paper Thickness
0.06~0.08mm
Driver
Win 2000/ Win 2003/ Win XP/Win Vista/Win 7, Win 8,
compatible with EPSON and SAMSUNG, OPOS Driver support
Print Command Compatible with ESC/POS commands set
Auto Cutter Partial
LED Indicator
3 and 2 Auxiliary Paper Indicator
Audio Indicator
83 dB , with print job notification
Paper End Detection Yes
Over-Heat Halt-on Protection Yes
Interface
Serial
1 x DB-9 Serial Port
Ethernet 1 x RJ-45
Others
Power Input
+24VDC/2.5A
(with External Adapter 100~240VAC 50/60Hz),
embedded in the body
Color Black
Compliance FCC / CE / WEEE / RoHS
Weight
1300 g ( with power adapter)
Dimension (mm) 190.5 (L) x 140 (W) x 145.0 (H)
Operating Temperature 5°C~45°C
Operating Humidity 10% ~ 80% RH non-condensing
Storage Temperature
-10°C~ 50°C
Installing the Driver of The Printer DIP Switch Configuration
To change the setting of the printer manually:
1. Turn off the printer.
2. Remove the DIP Switch Cover.
3. Adjust the DIP switches to configure the printer.
4. Re-install the DIP Switch Cover.
DIP Switch Cover
DIP Switches
Baud Rate Setting
19200
9600 115200 38400
IM-MANU-PRP-350-TYSSO-EP
20150620
6. The driver is successfully installed.
Click “Finish” to exit the menu
7. Examine the Printer
Now user can access to the “Devices and Printers” and
examine the new printer.
1. Place the supplied Utility CD into the CD-ROM drive.
2. Browse the CD and double click the icon
“SetupPRP.EXE”.
Note:
For Windows 7 / Vista and the later version,
Please Right-Click the icon and use
“Run as administrator” option while installing the Driver.
3. Click “Install” to continue.
4. Select “Install this driver software anyway”.
5. Enter printer name and select the port type
(Serial or TCP/IP interface).
You can click the checkbox to set the printer as default
printer.
Click “OK” to continue.
6. Select the proper Port available
(for Serial or TCP/IP interface)
6. The driver is successfully installed.
Click “Finish” to exit the menu
7. Examine the Printer
Now user can access to the “Devices and Printers” and
examine the new printer.
Note:
For Ethernet (TCP/IP) Interface Installation
Printing on the TCP/IP Port is only possible if both IP
Address (Printer and Computer) belongs to the same class.
Please consult the IT professional before installation and
refer to the instruction manual for further information.
DIP
Function
ON
OFF
1
Paper Cutter
No
Yes
2 Audio Alarm Yes No
3
Print Density
Dark
Light
4 Two-Byte Character Code No Yes
5
Character Per Line
42
48
6 Printed Paper Detection No Yes
7 & 8
Baud Rate Setting
---
----
Loading...