Tysso PRP-080SC, PRP-080PC, PRP-080SN, PRP-080PN, PRP-080 User Manual
PRP-080
THERMAL RECEIPT PRINTER
User's Manual
Specifications subjects to
change without notice
-1-
Contents
1. General Information
2. Quick Start
3. Printer Interface and Connection
4. Configuration
5. Safety and Maintenance
Appendix (A) Specifications
2.1) Unpacking & Parts Identification.............................. 3
2.2) Loading the Paper Roll
3.1) Connecting the Interface Cable
3.2) Connecting to a Cash Drawer
3.3) Connecting the AC Adapter
4.1) Printer Status (Red LED)
4.2) DIP Switch Settings
4.3) Printer Self Test
5.1) Safety Information
5.2) Periodical Cleaning
5.3) Preventing Paper Jams
5.4) Fixing Paper Jam
...................................................... 2
...............................................4
................................. 6
.................................... 6
........................................7
.......................................... 8
................................................... 9
......................................................... 9
.................................................. 10
................................................. 11
............................................. 11
..................................................... 12
.............................................. 14
.......................................... 16
.......................................... 21
Appendix (B) Configurations
Appendix (C) Commands List
-3--2-
1. General Information
Models
Main Features
PRP-080SC (serial interface, with auto-cutter)
PRP-080PC (parallel interface, with auto-cutter)
PRP-080SN (serial interface, without auto-cutter)
PRP-080PN (parallel interface, without auto-cutter)
220mm/s maximum print speed.
High reliability due to a stable mechanism.
Command protocol is based on the ESC/POS standard.
Various layouts are possible by using page mode (#).
Characters can be scaled up to 64 times as large as the
standard size.
Repeated operation and copy printing are possible by using
macro definitions.
Character font size (12 24 font or 24 24 font) can be
selected by using a command.
Easy paper-roll installation.
Equipped with an auto-cutter.
The printer allows easy maintenance for tasks such as head
cleaning.
Two different print densities can be selected by DIP
switches.
The built-in interface provides control capability for one
cash drawer.
1. High speed printing:
2. Application Software:
3. Printer Handling:
Front cover
Control panel
Features LED indicators
to indicate printer
status and buttons to
operate the printer.
Cover Open lever
Pull this lever in the
direction of the
arrow to open the
printer cover.
Connects to peripheral
units such as cash
drawers, etc.
Do not connect this toa
telephone line.
For connection to a
host computer.
For connection of
the AC adapter.
Never unplug the
AC adapter while
the printer is on.
2. Quick Start
2.1) Unpacking & Parts Identification
a. Inside the Package:
b. Parts Identification:
-5--4-
2.2) Loading the Paper Roll
a. Make sure that the paper roll matches the printer's
specification. Do not use paper rolls that have the paper
glued to the core because the printer cannot detect the
paper end correctly. Important: The printing quality and
lifespan of the thermal head cannot be guaranteed if any
paper other than that recommended is used. Thus, the
warranty will be voided automatically if any fault occurs
due to the use of wrong paper rolls.
b. Open the printer cover by pressing the Cover-Open level
Do not pull the cover open lever and open the
printer cover when printing is in progress.
Recommended Paper Rolls
Important:
Part Number
HPK-110
AF50KS-E
TF-50KS-E
PD-160R
F380
Manufacturer
Hansol Patech Co. Ltd.
JUJO Paper Co. Ltd.
Nippon Paper Industries Co. Ltd.
New Oji Paper Mfg. Co. Ltd.
Nansaki Specialty Papers Inc.
c. While observing the direction of the roll, set the paper roll
into the hollow, and pull out the leading edge of the paper
toward you as shown:
d. Close the cover: When closing the cover, press the center
of printer cover firmly to prevent paper miss-loading
e. Tear off the paper outside the cover as shown.
(If the printer is without auto-cutter)
Cover-Open lever
Loading...