TypePal TCTH User Manual
TyrePal Limited, Unit 2 Glen Industrial Estate, Essendine, Stamford, PE9 4LE. United Kingdom
Tel: +44 (0)1780 755490 e-mail: enquiries@tyrepal.com www.tyrepal.co.uk
© TyrePal Ltd 2013 TCTH 20130226
Tyre Pressure Monitoring System
Hand Held Reader Programmer
TCTH
User manual
TyrePal Limited, Unit 2 Glen Industrial Estate, Essendine, Stamford, PE9 4LE. United Kingdom
Tel: +44 (0)1780 755490 e-mail: enquiries@tyrepal.com www.tyrepal.co.uk
© TyrePal Ltd 2013 TCTH 20130226
2
CONTENTS
1. INTRODUCTION ............................................................... 3
1.1 Functions ................................................................... 3
1.2 Layout and controls ................................................... 3
1.3 Power ........................................................................ 3
1.4 Screen display ............................................................ 4
2. SET FUNCTION ................................................................ 4
2.1 Select vehicle type ...................................................... 4
2.2 Select sensor type ...................................................... 4
2.3 Parameter setting ....................................................... 5
2.3.1 Trailer ID ........................................................... 5
2.3.2 Unit setting ........................................................ 5
2.3.3 High and low pressure alert levels ....................... 5
2.3.4 Alert temperature ............................................... 5
2.3.5 Exit function setting ............................................ 5
3. REGISTER SENSORS .......................................................... 6
4. READ SENSOR DATA ......................................................... 6
5. DELETE SENSOR DATA ...................................................... 7
5.1 Delete all sensor data ................................................. 7
5.2 Delete individual sensor data....................................... 7
6. SEND DATA TO TPMS MONITOR OR TRANSCEIVER............. 7
6.1 Send data to TPMS monitor......................................... 7
6.2 Send data to Smart Trailer Transceiver ........................ 7
7. RECEIVE DATA FROM SMART TRAILER TRANSCEIVER ........ 8
8. SPECIFICATION SUMMARY ................................................ 8
9. TROUBLESHOOTING AND ADDITIONAL INFORMATION ....... 8
10. SERVICE AND WARRANTY ............................................... 8
3
TyrePal Limited, Unit 2 Glen Industrial Estate, Essendine, Stamford, PE9 4LE. United Kingdom
Tel: +44 (0)1780 755490 e-mail: enquiries@tyrepal.com www.tyrepal.co.uk
© TyrePal Ltd 2013 TCTH 20130226
1. INTRODUCTION
The Hand Held Reader Programmer can be used to quickly check all the tyres on a
vehicle or trailer. It is also used to set alert levels or to register sensors to each wheel
position. It is particularly useful for fleet applications as it is quicker and more convenient
than programming through the in-cab monitors.
1.1 Functions
•
Read sensor IDs, pressure and temperature
•
Store sensor locations and IDs
•
Set pressure and temperature units.
•
Set pressure and temperature alert levels for tractor and trailers
•
Send all data to monitor and repeater at one time
•
Can store data for up to 4 trailers
•
Can code up to 24 tyres on each trailer.
1.2 Layout and controls
1.3 Power
Insert 4 x AAA batteries. Press any button to turn on the display. In standby mode, the
unit turns off automatically after three minutes.
Loading...