Page 1
typecase
TOUCH
USER MANUAL
For warranty registration and product support:
typecase.co/resources
+1(832) 303-5080
support@typecase.co
Page 2
TABLE OF CONTENTS
TECHNICAL SUPPORT
SETUP
SHORTCUT MAP -
SHORTCUT MAP .
TOUCHPAD FUNCTION
INSTALLATION AND REMOVAL .
ROTATION AND USAGE
BATTERY AND CHARGING .
BATTERY AND CHARGING
TROUBLESHOOTING -
TROUBLESHOOTING - 7
PRODUCT SPECS -
CAUTION
FCC 8
-3
.5
-6
2
4
5
6
8
Page 3
TECHNICAL SUPPORT
If you encounter any difficulties or have inquiries, please do not hesitate to reach out to us
at your earliest convenience.
For the quickest and most efficient support experience, please contact us directly through
one of the following channels, rather than through Amazon.
1. Email: support@typecase.co
2. Phone: 832 - 303 - 5080
3. Chat: https://typecase.co/support
SETUP
To Pair with Your iPad:
Turn the
1.
2.
The Bluetooth indicator light will start to blink. If
ON/OFF
switch to the 'ON' position.
On/Off Switch
it doesn't, hold down the 'Pair' button for 3
seconds.
3.
Go to the Settings app and turn on Bluetooth.
(The device is connected when the Bluetooth
pair
indicator stops flashing.)
Settings
Mode
il Bluetooth
4.
In the Bluetooth section of the Settings app, select 'Typecase Flexbook' under
DEVICES'.
5.
Tap 'Pair' in the pop-up window as
shown.
On
Bluetooth
MY DEVICES
Typecase Flexbook
Bluetooth
*Note: To pair with new devices, repeat
steps 1-5.
Pairing complete when "Connected"
indicator appears.
Connected
Pair
Page 4
SHORTCUT MAP
Notice: Long Press
Press once
Home
Press twice
App
Long Press Decrease Increase Back Increase
Switch
Keyboard
Language
Brightness
in any app to view available shortcuts.
Media Volume
Ploy/pouse Forward Decrease
Keyboard
-Lock Screen
System
Backlight
Virtual
Battery Change Change
Status color
Key rd
Long Press - App specific shortcut shows up (e.g.when
you are in an App, hold this keyand you will see all the
shortcuts that can be used inthis App)_
brightness
Trac ad ON OFF
-Reset the keyboard
Red Flashes
Charge Needed
-Go to Home Screen
H
-Go to Home Screen
cmd
H
Q
-Quick Note
-Show Dock
-Control Center
-Notification Center
-Show Keyboard Shortcuts
cmd
s -Siri
+ D -Show Dock
tab
-Switch App
-Show App Library
-Screenshots
-Screenshots
4 and Markup
Q
-Search
2
Page 5
SHORTCUT MAP
Multitasking
, n —Show All Windows
Format
cmd
cmd
Edit
option
option
control
control
control
COnt
B
-App Switcher
—Previous App
-Next App
-Bold
-Italic
—Underline
—Jump to last word
-Jump to next word
—Jump to top of the page
-Jump to bottom of the page
—Jump to begin of the line
—Jump to end of the line
—Select All
Slide Over
Split View
-Move to Left Slide Over
-Move to Right Slide Over
-Show Slide Over
-Next Slide Over Window
= Tile Window Left
=Tile Window Right
-Enter Fullscreen
-Cut
x
-Copy
c
-Paste
-Undo Typing
z
—Find
-Dictation
D
-Emoji
Symbol
—Switch language and typewritingspace
Q
3
Page 6
TOUCHPAD FUNCTION
Notice: Make sure bluetooth connected and touchpad function turned on !
Tap
Tap with a single finger until it feels
a little touch feeling.
Tap and Hold
Tap and hold with a single finger.
Drag
Tap and hold an item, then swipe
your finger across the trackpad
to move it.
Open Program
Expansion Dock
Swipe the pointer across the bottom Of
the screen with one finger.
View Slide Over
Use one finger to swipe the pointer
past the right edge of the screen. To
hide Slide Over, swipe right again.
Open Control Center
Use one finger to move the pointer to
select the status icons at the top right,
then click.
Or, select the status icons at the top
right, then swipe up with one finger.
t
Move Up Or Down
Swipe up or down with two fingers.
Awake
Click the touchpad or press any
key on the keyboard.
Go To Home Screen
Swipe the pointer across the bottom Of
the screen with one finger, and when
the Dock appears, swipe the pointer
across the bottom of the screen again.
Open Notification Center
Use one finger to move the pointer to
select the status icons at the top left,
then click.
Or, use one finger to move the pointer
past the top Of the screen near the
middle.
Move Left Or Right
Swipe left or right with two fingers.
Open Searching
From Home Screen
Swipe down with two fingers.
Secondary click
Zoom
Place two fingers close together, open
to enlarge, or pinch to zoom out.
Click with two fingers to show the
quick actions menu for items like
icons on the Home Screen, messages
in a mailbox, and the Camera button
in Control Center.
Or, you can press the Control key
while you click the trackpad.
Open" Today" View
When the Home or Lock screen is
visible, swipe right with two fingers.
Open APP Switcher
Swipe up with three fingers, pause
and lift your finger.
Go To Home Screen
Swipe up with three fingers.
Shift Between
The open APP
Swipe left or right with three fingers.
4
Page 7
INSTALLATION AND REMOVAL
Installation:
2
Gently attach the iPad to the back cover.
Pull up to remove the iPad from the back cover.
ROTATION AND USAGE
Rotate 3600 by twisting
WARNING
Opens up to 1800
x
1800
BATTERY AND CHARGING
To Check The Battery Status Of The Keyboard
Press on the keyboard. The battery level will be indicated by the number of lit
indicators.
>1800
O battery level is between 100% and 70%
0
battery level is between 70% and 40%
O
battery level is between 40% and 10%
O
battery level is less than 10%
Note: If the keyboard has been connected to an iPad, you can also check the battery
status through the iPad's battery widget.
5
Page 8
BATTERY AND CHARGING
usa
To Charge The Keyboard
1.
Turn on the keyboard (if battery indicator is
flashing, please charge the keyboard).
2.
Plug the charging cable (included) into the
TYPE-C
keyboard and power adapter (not included, iPad or
iPhone power adapter recommended);
a)Battery indicator turns red when keyboard is
charging;
b)Battery indicator turns blue when charging is
complete.
iPad adapters
TROUBLESHOOTING
If your keyboard is not functioning properly, please follow these steps to resolve
the issue:
1.
Ensure Bluetooth is enabled on your iPad or other Bluetooth device.
2.
Verify that the keyboard is within 33 feet range.
3.
Confirm that the keyboard is charged.
4.
5.
Press the 'Pair' key and check the Bluetooth connection status.
6.
Ensure the keyboard has successfully paired via Bluetooth.
to check the battery level by indicator.Turn on the keyboard, press
If you are encountering unwanted cursor move when typing, or some keys like
7,8,9,U,O,J,K,L cannot be entered, please Turn OFF AssistiveTouch> Mouse
Keys as follows:
1.
On your iPad, go to Settings > Accessibility and select Touch.
2.
Select AssistiveTouch, then select Mouse Keys.
3.
Turn Off Mouse Keys
uouse Keys
6
Page 9
TROUBLESHOOTING
If you are encountering unwanted auto-correction or punctuation, follow these
steps:
1.
Open the Settings app > General > Keyboard > Hardware Keyboard.
2.
Turn OFF the options for Auto-Capitalization, Auto-Correction, and
the accompanying picture for reference).
. shortcut (refer to
Settögs
General
Ois*y 8 mghtness
O Sounds
Siri &
TOuch 10 & Passcode
< Keyboards
English (United States)
Auto-Capita«zatbn
Auto-Correction
".t Shortcut
If you experience difficulty pairing your keyboard via Bluetooth, please follow
these steps:
Delete any previously paired Bluetooth devices on your iPad.
2.
Turn off Bluetooth on your iPad.
3.
Restart your iPad.
4.
Turn on Bluetooth on your iPad.
5.
Turn off and on the keyboard.
6.
Repeat the pairing steps as described on page 2 and 3 of the manual.
If you're still having problems troubleshooting your keyboard, try doing a hard
reset:
Hold down C+R+L on the keyboard, until the keyboard indicators begin to flash. The
keyboard will be reset.
PRODUCT SPECS
Operating distance: 10 meters (33 feet)
Modulation System: GFSK
Working voltage: 3.0-4.2V
Working current:
0.88-200mA
Sleeping current: < 125uA
Charging current: <800mA
Continuous working
ime without backlight: 60 hours
Charging time:<2.5 hours
Charging voltage: 5V
Key's life span: > 5 million strokes
Operating temperature:
Maintenance: Please preserve the
keyboard under normal temperature
and recharge under normal voltage.
7
-10 ±550C
Page 10
•C CAUTION
English:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interfer
ence,and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
French:
Le présentappareilestconforme aux CNR d'lndustrie Canada applicables aux apparels radio
exempts de licence. L'exploitationestautorisée aux deux conditions suivantes:
(I) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mémesi le
brouillageest susceptible d'encompromettre le fonctionnement.
FCC CAUTION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/ TV technician for help.
*RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
8
Loading...