Tyent Rettin UCE Series, Rettin UCE-E11T User Manual
Tyent Australia
User’s Manual
MADE INKOREA
The consumer accepts any and all responsibility
and/or liability if replacement filters and/or parts
are not manufacturer specific.
This product is subject to changes that enhance
its performance without priornotification.
pH Chart
How to Measure : Place 2-3 teaspoons(10-15ml)
of test water in a container and add 2-3 drops of
reagent. Then, mix well and check color of the water
with the pH chart above. (Color is dependent on
water quality and reagent)
The user should be responsible for failure or
improper selection or improper use of the
products such as use in any manner for
which the product was not originally
intended.
To Our Valued Customers Table of c o n t e n t s
under c o u n te r extre m e
Table
of
c o n t e n t s
To
Our
Valued
Customers
• We are not responsible for any accidents and/or malfunctions due to
the improper use of thismachine.
• Please keep the manual and warranty card in a safe place, so that
it’s easily accessible when you need it.
• Please refer to this manual often when you have questions during
usage or when troubleshooting this unit.
Thank you for purchasing the UCE series Water Ionizer.
Please read all safety warnings and this User’s Manual carefully
before using this product to ensure proper product usage. (Keep the
manual handy for easy reference.)
Intended Use
2
3
This device creates functional alkaline, ionized water. It changes
the properties of regular tap water through the use of electrolysis.
Following are the changes normal tap water undergoes via this process:
• An increase or decrease in pH level
• Creation of negatively charged hydrogen ions(anti-oxidants)
• Smaller water molecule clusters for better absorption
• An increase in oxygen
• Purification through filtration
To OurValued Customers
Table of Contents
Before Usage
SafetyPrecautions and Warnings
2
3
4
5
Dispenser Overview
10
Unit Overview
11
Product Features
12
Package Contents
16
Parts Drawing for Installation
17
Placement of the faucet tower harness connections
18
Under-Sink Installation
19
Dispenser Installation
20
Ionizer Installation
22
Customer Serviceable Parts
24
How to Change the Filters
25
How to Reset the Filters
26
Operation Touch Screen
27
Unit Usage
31
System Setup Method
33
Selecting Voice on/off
40
Cleaning Function
41
Eco Mode
42
Turbo Function
43
Usage Recommendations
44
Temperature Sensor
46
Unit Specifications
47
Troubleshooting
48
Product Warranty
51
Bef or e Usage
Safety Precautions and Warnings
under c o u n t e r ex t r e me
Before
Usage
DANGER (Red Warning S ign)
–indicates an imminent hazard
that could result in serious injury
or death. If you see this, stop the
use of this unit immediately.
WARNING (Orange Warning Sign )
– indicates a potential hazard that
could result in significant bodily harm
or damage to the unit. If you see this,
stop the useof this unit.
ATTE NTIO N (Yellow Warning Sig n)
– indicates a potential hazard that
could result in minor bodily harm or
damage to the unit.
Safety precautions are provided for the safe and proper use of this unit and can
prevent danger, bodily harm and/or possible damage due to misuse. Please make
sure you are familiar with all the safety precautions and warnings associated with
this unit.
Only use the unit with the correctvoltage.
Regarding Power Supply
PLEASE FOLLOW ALL INSTRUCTIONS WHEN YOU DRINK WATER CREATED BY
ELECTROLYSIS FROM THIS UNIT.
(Hereinafter referred to as“functionalwater”)
Safety
Precautions
and
Warnings
1. Do not drink functional water with medication. Use filtered Water instead.
2. Always consult your primary care physician before drinking functional water. Only
drink a small amount for the first week near
a neutral pH level. This will give the body
time to adjust to functional water during the
detoxification period.
3. If you notice any negative effects from
drinking functional water, stop drinking
immediately and consult with your primary
care physician about changes in your
body’s pH level.
4. If you are currently under the care of a
primary care physician for an existing
condition, consult with your primary care
physician about how changes in pH and
other characteristics of functional water
could affect yourcondition.
5. If you suffer from gastric anacidity, kidney
failure or potassium excretion, you should
notdrinkfunctionalwater.
6. Verify the pH levels of the functional water
dispensed from this unit on a monthly basis
to ensure proper function. This can be
done with the supplied reagent drops and a
pH colorchart.
7.
When switching from onepH to another, it
is
good practice to let the waterrun for several
seconds before using.
8.
It is common to drink half your body weight
in ounces. For example, if you weigh 180
pounds, it may be wise to drink 90 ounces
of water per day. This especially applies
after you have given your body some time
to adjust to the new pH level.
9.
9.5 to 9.8 pH is the recommended drinking
level for functional water. It is not recommen
dedto drinkfunctional water above 10 pH.
10.
If you wish to store functional water, use a
glass, stainless steel or other non-leaching
materialand store in the refrigerator.
11.
Never run hot water through this unit.
12.
Never drink acidicwater.
Do not use power surge protectors with this
unit. Use unit with its own dedicated power
source.
Do not pull the power cord. Never touch power
cord or power outlet with wethands.
Do not use if the power cord is damaged or in a
loose power outlet.
Please always use a grounded power outlet.
Unplug the power cord during general maintenance, repair, inspection and while replacing
parts.
4
5
under c o u n te r extr e m e
Safety
Precautions
and
Warnings
Safety
Precautions
and
Warnings
Usage
benzene
Do not place ANY objects on top of this unit
regardless of howsmall.
To reduce the risk of electric shock, do not
remove cover; no user-serviceable parts inside.
Refer servicing to qualified service personnel.
Removing thecover willvoid thewarranty.
Do not spray water on the main unit. Do not
clean with a damp cloth, benzene or other
chemicals, which mayleak into the unit.
Do not store unit near chemicals, food, metals
or medication.
Do not poke or scratch the touch pad or LCD
display with sharp objects.
It is beneficial for the maintenance of the
machine to run a strong acidic level for a period
of 5minute cycles twice weekly. This will help to
maintaina clean chamber.
In case of strange noises, burning odor or
smoke, unplug the power cord immediately and
refer servicingto qualified service personnel.
In case unit leaks (other than hoses) or is
standing in a puddle of water, shut off water
supply, unplug the power cord and refer
servicingto qualified servicepersonnel.
Replace filters every 6 months to optimize the
purification performance of this unit even if the
replacement indicator lightisn’t turned on.
Do not forcibly bend, squeeze, damage or
crush the power cord under heavy objects.
Do not use alkaline or acidic water in fish bowls
or aquariums. The sudden change in pH could
be harmfulor fatal to some marine life.
In areas of hard water(Calcium scaling present
on faucets) notify service provider and install
cell safe anti scale Pre-filter, protects against
scaling of ionizer.
6
7
under c o u n t e r ex t r e me
Safety
Precautions
and
Warnings
Safety
Precautions
and
Warnings
Do not place this unit near heat sources.
Do not connect water line to a hot water supply.
Do not place this unit on an uneven surface. Do
not drop or use excessive force on this unit.
Installation Storage
Do not use unfit raw water in accordance to the
standards of the water serviceact.
8
9
In the case where the unit isn’t used over a
long period of time, shut off the valve and
unplug the power cord.
Remove the filters and shake out as much as
possible. Store in plastic bag in refrigerator to
avoid bacteriagrowth in filters.
In case the original packaging is not available,
cover the unit in plastic to avoid scratching the
surface.
Carefully remove this unit from packaging.
Keep original packaging for future storage and
unit transportation.
Store unit in its original packaging in a cool, dry
place when not in use.
Do not use in areas of high humidity and/or high
temperature.
under c o u n te r extr e m e
Unit
Overview
Dispenser
Overview
Dispenser Overview Unit Overview
Front View
Front View
Rear View
Rear View
●
1
Front Case
●
2
Front Cover
●
3
Front Door Case
●
1
Jog Dial
●
2
Water Outlet
Pipe
●
3
Drain Pipe
●
4
Fixing Nut
●
5
Speaker
●
1
Hanging Groove
●
2
Rear Case
●
3
Product Sticker
●
4
Power Swich
●
5
Fuse
●
6
Power Cord
4
5
6
Bottom View
●
1
Alkaline
Outlet
●
4
MCU Cable
5
●
2
Acid Outlet
●
5
Power
Code
●
3
Tap Water
Inlet
29.5cm
11.6inch
17.2cm
6.8inch
3.3cm
1.3inch
13.2cm
5.2inch
11cm
4.3inch
16cm
6.3inch
35cm
13.8inch
13.2cm
5.2inch
36cm
14.1inch
38.2cm
15inch
SIN
K
5cm
2inch
10
11
3. GERMAN
4. FRENCH
5. ITALIAN
6. SPANISH
1. KOREAN
2. ENGLISH
3. GERMAN
4. FRENCH
under c o u n te r extr e m e
Product
Features
Product
Features
Product Features
GUI [Graphical User Interface]
Jog Dial & Touch with 2 way Operation Compatibility
Offering both Kitchen Space and UltimateBeauty
A DESIGNMASTERPIECE
FULL TOUCH LCD – TRANSFORMATION AT YOUR FINGERTIP
JOG DIAL & TOUCH
Light and Screen Indicators for Water Discharge Detection
Excellent MP3 Sound Quality with Guided Support
CAREFUL CONSIDERATION FOR THE USER
Upgraded Power Turbo System
Power SMPS Power Supply System
Electrodes with Round-Mesh Plate Technology
MORE POWERFUL SYSTEM ENGINE !
The RETTIN Under Counter Extreme Water Ionizer not only attracts
person’s gaze with its well-differentiated appearance, but also
helps to upgrade your kitchen’s interiordecoration with a neat and
luxurious expression.
Turbo upgrades to the SMPS Power Supply system produce both
the acid turbo water and strong alkali water youneed!
Power SMPS Power Supply System provides the maximum
instantaneous output needed to produce the highly stable electric
powerrequiredforeachphase of electrolysis.
These Platinum-Coated Titanium Plates are made with highly
stable, durable mesh technology that enhances the instantaneous
electrolysis efficiency.
Changes to the LCD screen and Jog Dial light can be easily
identified to check each selected phase.
Functions under operation can be further identified by the top
quality voice guidedsystem.
Multiple Languages Supported
Diversified language guide support is available by selecting 1 of 6
languages featured from across the world.
The Industry’s First Full Touch Screen Panel
The Full Touch Screen Panel System automatically activates the
unit’s operations through a simple touch to the desired icon
displayed on the screen.
Touch LCD Screen with a Clear Picture Tone
A 262,000 Color Touch LCD Display provides diverse information
in true vivid colors for userconvenience.
A Graphical User Interface is designed specifically for ease of use
and operation. Communication between the user and ionizer has
never been this simple!
Choose from either the Jog Dial or the Touch Screen Panel
system–both are available with 2 way operation compatibility and
areeasy to use at yourconvenience.
11:00a
80% 80%
12
13
under c o u n te r extr e m e
Product
Features
Product
Features
Earth-Friendly Technology when in ECO Mode
True energy saving is accomplished with ultra low power consumption
during periods of non-use.
CARE FOR THE ENVIRONMENT
Temperature Sensor Function for Safe Operation
Water Discharge Nozzle with DirectionalControl
The water discharge direction may be adjusted to many diverse
angles based on user preference.
Automatic Water Discharge Interruption Function
In order to prevent the overflow of water due to user negligence,
the water discharge is automatically stopped after 15 minutes of use.
Automatic Electrolysis Tank Cleaning Function
The interior of the Electrolysis Tank is automatically cleaned on a
regular basis, ensuring stable electrolysis operating conditions.
Automatic Memory Function
The last function used by the user is automatically memorized and
displayed on the Standby Screen for fast and convenient operation.
Water Purification through a Clean Process
FRESH, PURIFIED WATER IS A MUST ALONG WITH HEALTHYMINERALS!
Convenience of Operating Condition Setting System
Super Simple Filter Replacement System
pH Control Function
Respective alkali, acid & turbo phases can be easily controlled by
the user.
Self Diagnosis Function
When the condition of the source water is not suitable, the water
discharge is automatically suspended, displaying a Warning Sign
on screen.
Filter Usage Indication and Replacement TimeGuide
SELF MAINTENANCE MADE EASY –FROM INSTALLATION TO AFTER-SERVICE
14
15
If the temperature of the source water exceeds 95℉ (35℃) then
water will stop flowing and a warning message will appear on the
screen.
Perfect, seamless elimination of foreign substances including
residual chlorine, organic & inorganic compounds through the
filtering process using functional UF and ∏ Ceramic materials,
enhancing the alkali waterproducing condition.
Level of filter usage can be identified through the LCD Screen on a
real time basis. The recommended replacement time is
automatically displayed on the screenwitha voice guide.
A simple filter replacement system along with one-touch Filter
Usage Initialization Setting System makes filter management easy
for any one.
Easy Setting System familiar to common users is employed,
allowing the convenience of setting or canceling the desired
through the LCD Screen.
under c o u n te r extr e m e
Parts Drawing
f o r
Installation
Package
Co n t e n t s
Parts Drawing f or InstallationPackage C o n t e n t s
Ionizer
rubber packing
(2EA)
Wrench
pH Testing
Solution Bottle
User’s Manual
Tap Water
hose
Acid hose
(Orange)
&
Alkaline hose
(White)
Water Outlet Pipe
Stem Elbows
(3EA)
dispenser
fixing nut
Cable Tie
T-Adapter
Dispenser
Rubber packing
Rubber packing
Fixing
nut
Unionconnector
Stem elbow
Acid outlet
Tap water inlet
Alkaline hose
Acid hose
MCU cable
Alkaline outlet
Tap waterhose
Acid hose
Alkaline hose
MCU
cable
Adapter
Ionizer
Tap water
hose
MCU cable connector
Cable tie
Bottom
Picture of components can be different fromthereal ones, and some itemsmaybe changed according to the situation.
16
17
Loading...