Page 1
5200009-02
BRACKET "A"
BOLT
STEP 5:
ADJUST ANGLE OF
SOLAR PANEL BY MOVING
LOWER POLE BRACKET
ASSEMBLY TOWARD THE
GROUND AS SHOWN.
2 PANEL
MOUNTING
RAILS
4 PANEL
MOUNTING
RAILS
FOUR PANEL MOUNTING REQUIRES
EXTENDED MOUNTING RAILS AS
SHOWN IN STEP 2B
Optimum Winter Tilt Angles
Houston / Cairo
Albuquerque / Tokyo
Denver / Madrid
Minneapolis / Milano
Winnipeg / Prague
56 deg
60.5 deg
65 deg
69.5 deg
74 deg
LOCK
WASHER
WASHER
NUT
A
STEP 1A:
ASSEMBLE POLE BRACKET
ASSEMBLIES AS SHOWN TO APPROXIMATE
DIMENSIONS. ASSEMBLE TWO ASSEMBLIES
A
B
5200009-01
5200009-03
BRACKET "B"
28 1/2"
27 1/2"
723.90mm
698.50mm
STEP 1B:
ATTACH POLE
MOUNT BRACKET ASSEMBLY
TO POLE USING HOSE
CLAMPS THAT ARE PROVIDED
ADJUST BRACKET ASSEMBLIES
TO APPROXIMATE
DIMENSIONS SPECIFIED AND
TIGHTEN SNUG TO POLE BUT
STILL ALLOW ASSEMBLIES TO
MOVE SLIGHTLY.
B
STEP6:
WHEN THE SOLAR PANEL ASSEMBLY IS POSITIONED AND TILT ANGLE
IS SET PROPERLY THEN TIGHTEN ALL NUTS AND BOLTS SECURELY.
B
36"
914.40
A
THIS ASSEMBLY MUST BE TURNED
UPSIDE DOWN, WITH"A" BRACKET ON
THE RIGHT AND "B" BRACKET ON THE LEFT.
Page 2
5200009-05 (2 PLACES)
(COUPLER BRACKET)
70W SOLAR
PANELS (2 PLACES)
STEP 2A:
ASSEMBLE MOUNTING RAIL
SYSTEM AS SHOWN IN THE 90°
POSITION USING 10 SETS OF BOLTS,
WASHERS, LOCK WASHERS AND NUTS.
53.32in
1354.40mm
NUT
WASHER
LOCK
WASHER
BOLT
STEP 3:
LOCK
WASHER
MOUNTING RAIL
HOLES (4 PLACES)
BOLT
WASHER
HARDWARE
DETAIL
WHEN INSTALLING TWO SOLAR PANELS TOGETHER YOU MUST USE
NUT
THE COUPLER BRACKETS ON EACH SIDE AND USE 8 SETS OF BOLTS, WASHERS,
LOCK WASHERS AND NUTS. YOU WILL NEED TO MAKE TWO SETS OF THESE
ASSEMBLIES WHEN MOUNTING FOUR SOLAR PANELS TO THE RAIL SYSTEM.
NUT
LOCK
WASHER
STEP 2B:
WHEN MOUNTING FOUR SOLAR
PANELS YOU WILL NEED TO EXTEND THE
MOUNTING RAILS BY ASSEMBLING TWO
RAILS TOGETHER WITH HARDWARE SHOWN.
YOU WILL NEED FOUR SETS OF THIS ASSEMBLY
TO MOUNT FOUR SOLAR PANELS TOGETHER.
NUT
LOCK WASHER
WASHER
BOLT
WASHER
BOLT
5200009-04
(MOUNTING RAILS)
STEP 4:
ATTACH SOLAR PANEL ASSEMBLY TO
POLE BRACKETS USING FOUR SETS OF MOUNTING
RAILS, BOLTS,WASHERS AND NUTS. (EXTENDED
MOUNTING RAILS DETAILED IN STEP 2B ARE
NEEDED WHEN MOUNTING FOUR SOLAR PANELS)
Loading...