Tycon Power TP-MS608, TP-MS616 User Manual
TP
-M
S
608/616
Power Source Equip
(Power over Ethernet Hub)
USER’S MANUAL
me
nt
TYCON POWER SYSTEMS
TYCON POWE
R SYSTEMS
S
tation and Status Wi
ndo
w Select ...
..........
.
........................................
.
24
27
28
29
30
User’s Manual TP-MS608/616
Contents
1. Introduction...........................................................................
Features................................................................................................
3
3
Package Contents.................................................................................
2. Hardware Description...........................................................
Physical Dimension...............................................................................
Front Panel............................................................................................
LED Indicators.......................................................................................
Rear Panel............................................................................................
Power On..............................................................................................
Network Application...............................................................................
RJ-45 Remote Control Port...................................................................
3. Software Utility Installation..................................................
4. GUI Management...................................................................
Display and Illustration..........................................................................
System Login........................................................................................
4
4
4
4
5
5
6
6
7
14
15
15
16
Modify Password…...............................................................................
Edit Station TCP/IP...............................................................................
Edit Remote PoE IP.............................................................................
GUI Connect.........................................................................................
Configuration.........................................................................................
Factory Setting…………........................................................................
Board Status…………………………………………………………………
Port Status…………………………………………………………………...
GUI Version………………………………………………………………….
GUI Disconnect…………………………………………………………......
File Open and Save…………………………………………………………
5. Technical Specification........................................................
17
18
19
20
22
23
26
31
2
TYCON POWE
R SYSTEMS
User’s Manual TP-MS608/616
1. Introduction
TYCON’s family of Power over Ethernet PSE (Power Sourcing Equipment), injects
power over data-carrying Ethernet cabling. The TP-MS608/616, support 8 and 16 ports
respectively in a 10/100/1000BaseTx Ethernet network, over TIA/EIA-568 Category
5/5e/6 cabling. DC operating power, for data terminal units, is fed over data pairs of the
cabling (4/5 and 7/8). This allows greater flexibility in the locating of network devices
and significantly decreasing installation costs in many cases.
The TP-MS608/616 follows the IEEE 802.3af/IEEE 802.3at and is completely
compatible with existing Ethernet switches and networked devices. Normally powers
PDs (Powered Devices) that are Power over Ethernet enabled or are equipped to
receive power over Ethernet. The PSE tests whether a networked device is
PoE-capable, power is never transmitted unless a Powered Device is at other end of
the cable. It also continues to monitor the channel. If the Powered Device does not
draw a minimum current, because it has been unplugged or physically turned off, the
PSE shuts down the power to that port. Devices that are not equipped to receive power
over Ethernet may require an external splitter in order to be powered. Contact Mstronic
for such a splitter.
Features
8/16 port Power Sourcing Equipment ( power over Ethernet Hub)
Support 8/16 ports full load, max. 576W
AC input (100-240 VAC, 50/60 Hz)
IEEE802.3af/IEEE 802.3at compliance, Power over Ethernet Mid-Span mode
Remote power feeding of Ethernet terminals up to 100 meters
Auto detect PD, and support manual detect PD
Centralized power distribution for PoE powered Device (PD)
Independent overload and short-circuit protection per channel
Supports IEEE 802.3af/IEEE 802.3at non-standard device
Auto refresh port status and support Plug and Play feature for PD
Standard 19” or 23” rack mountable
DIY upgrade from 8 port to 16 port available
Remote manage up to 8 units via TCP/IP protocol
DC input available, can work with battery, non-interrupt performance.
3
TYCON POWE
R SYSTEMS
User’s Manual TP-MS608/616
Package Contents
Unpack the contents of the TP-MS608/616 and verify them against the checklist
below.
TP-MS608/616 x 1
Power Cord x 1
Bracket x 2 ( for 19” rack mounted)
CD-ROM x 1 (Software Utility + User Manual)
Compare the contents of your TP-MS608/616 package with the standard checklist
above. IF any item is missing or damaged, please contact your local dealer for service.
2. Hardware Description
This Section mainly describes the hardware of the TP-MS608/616 and gives a physical
and functional overview.
Physical Dimension
TP-MS608/616 physical dimension is: 430mm x 290mm x 44mm (Lx W x H)
(1U, 19” or 23” Rack mountable)
Front Panel
Figure 2-1. The Front panel of TP-MS608/616
4
TYCON POWE
R SYSTEMS
User’s Manual TP-MS608/616
The Front Panel of the TP-MS608/616 consists of 8/16 x RJ-45 Ethernet ports (data),
8/16 x RJ-45 PoE ports (data + power), 8/16 x LED port indicators, one LED power
indicator and one RJ-45 remote control port(include one LED).
LED Indicators
The LED Indicators gives real-time information of systematic operation status. The
following table provides descriptions of LED status and their meaning.
LED
Status
Color
Description
RJ45
Power
Ports
On
Green
A network device
detected(10/100/1000
but no communication activity
detected
is
Mbps)
is
Blinking
Off
The Ethernet port is t
Green
to, or receiving package f
another
--
No device is detected
ransmitting
device
rom
On Green Power feeding normally
On
Off
Red
--
Power off
Power or fan alarm
On Green Power feeding
Blinking
Orange Detecting
The port has been shutdown
On
Orange
No power feeding
Alarm
On
Red
No power feeding
Off
-No power feeding
Table 2-1. The Description of LED Indicators
Unknown device attached
5
TYCON POWE
R SYSTEMS
User’s Manual TP-MS608/616
Rear Panel
The AC inlet, DC input terminal, and 2 Ventilation fan are located at the rear panel of
the TP-MS608/616. The device will work with AC in the range 100-240V AC, 50-60Hz.
Or work with DC -48V. (-42~-57VDC)
Power On
Connect the power cord to the power socket on the rear panel of the PSE. The other
side of power cord connects to the power outlet. The internal power supply of the PSE
works with voltage range of AC in the 100-240VAC, frequency 50~60Hz, or with
voltage range of DC in the -42~-57VDC. Check the power indicator on the front panel
to see if power is properly supplied.
Network Application
The PSE can provide power to the PD that follow the IEEE 802.3af/IEEE802.3at
standard in the network. It can solve the problem of position limitation. The network
device can be installed in more appropriate position for better performance. The
following figure is an example of network application for PSE
6
TYCON POWE
R SYSTEMS
User’s Manual TP-MS608/616
RJ-45 Remote Control Port
TP-MS608/616 can remotely manage the PoE via the network. To manage
TP-MS608/616, you must to set the TP-MS608/616 TCP/IP parameter.
TP-MS608/616 allowed you to use a standard Web-browser such as Microsoft Internet
Explorer or Mozila, to set the TCP/IP parameter.
Before you use the web interface to set the PoE TCP/IP, verify that TP-MS608/616 is
properly installed on your network and PC on the network can access PoE via the
web-browser.
1. Verify that PC network interface card (NIC) is operational on the TCP/IP protocol.
2. Supply power to TP-MS608/616.
3. Use RJ45 cable, connect TP-MS608/616 direct to your PC.
4. Make sure the TP-MS608/616 default IP is 192.168.1.10.
5. Set your PC IP to 192.168.1.2 or other IP address which is located in the
192.168.1.x subnet.
6. Make sure the connector is OK (Ping 192.168.1.10 on the DOS mode).
7 Start the web-browser and type http://192.168.1.10 (or used PoE IP setting icon in
the PoE management software).
8. The login in screen will appear next.
7
TYCON POWE
R SYSTEMS
User’s Manual TP-MS608/616
9. Key in ID (user name) and password to enter PoE TCP/IP parameter setting. Default
ID and password is admin and system.
10. TP-MS608/616 TCP/IP parameter has 4 pages interface (administrator setting,
TCP Mode, UDP Mode and UART). You must change the administrator & TCP mode
to fit your network.
8
TYCON POWE
R SYSTEMS
User’s Manual TP-MS608/616
11. Administrator setting: you can assign nickname, IP setting, user name, password
and view system information.
Nickname: You can assign a name to the device.
IP Address: You must assign the IP address reserved by your network. The default IP
is 192.168.1.10.
Subnet Mask: You can assign the subnet mask for the IP address. The default subnet
mask is 255.255.255.0.
Gateway: You can assign the gateway here. The default gateway is 192.168.1.1.
IP Configure: You must assign to Static for PoE serve operation. The default IP
configure is Static.
Username: You can assign new user name. The default setting is admin.
Password/Confirm: You can type in new password here. The default setting is system.
When you have finished the set up, click on Update to update your setting.
9
TYCON POWE
R SYSTEMS
User’s Manual TP-MS608/616
12. TCP Mode: You can update the TCP control parameter here.
Telnet Server/Client: Set to Server for PoE management operation.
Port Number: You can assign port number for TCP/IP operation. The default Port
Number is 23.
Remote Server IP Address: Unused.
Clint mode inactive timeout: Unused.
Server mode protect timeout: Set to 0(Disable) for normal operation.
When you have finished the set up, click on Update to update your setting.
PS: The TP-MSxxx does not support Telnet Terminal Operation.
10
Loading...