Tyco Electronics E811209 User Manual

Included Items:

MSR module

?

?

One screw to attach MSR

Note: For the D-Series touchcomputer, the software for the
field-installable peripherals is already pre-installed.

2009 Tyco Electronics.

North America

Elo TouchSystem
301 Constitution Drive,
Menlo Park, CA 94025
www.elotouch.com

Elo Technical Support

Online self-help

www.elotouch.com/go/websupport

Technical Support contacts in your region:

www.elotouch.com/go/contactsupport

:

Europe

Tel [phone]
Fax [phone]
[e-mail]

Asia-Pacific

Tel [phone]
Fax [phone]
www.tps.co.jp

Revision A
P/N E811209

Latin America

Tel [phone]
Fax [phone]
www.elotouch.com.ar

2009 Tyco Electronics.

North America

Elo TouchSystem
301 Constitution Drive,
Menlo Park, CA 94025
www.elotouch.com

Installing the

Magnetic Stripe Reader (MSR)

for the D-Series Touchcomputer

Caution:
Before attaching the MSR, make sure that the touchcomputer is powered off.

Elo Technical Support

Online self-help

www.elotouch.com/go/websupport

Technical Support contacts in your region:

www.elotouch.com/go/contactsupport

:

Europe

Tel [phone]
Fax [phone]
[e-mail]

Asia-Pacific

Tel [phone]
Fax [phone]
www.tps.co.jp

Revision A
P/N E811209

Latin America

Tel [phone]
Fax [phone]
www.elotouch.com.ar

1

T off the

urn power to the

touch

computer.

4

Slide the MSR onto the
mounting hooks.

2

5

3

Remove the existing
cover f or the MSR port
on the back side of the
display head.

Connect the MSR to
the existing connector (USB).

5

Secur e the MSR onto the
display head with one
screw from the MSR Kit.

6

Turn on the touchcomputer.