Tyco Electronics E428352 User Manual
9
OR
Connect one end of the RJ
phone cord to the scanner
and connect the other end
to the cradle assembly. Place
the scanner in the cradle.
Choose the desirable
Note:
RJ cable length.
Included Items:
?
Bracket (includes holster and cable with USB Type-A connector)
?
Two screws to attach bracket to chassis
?
Barcode scanner module
?
RJ phone cord (both short and long lengths included)
?
Security screw (to permanently attach scanner module to holster)
Note: For the 15D1 touchcomputer, the software for the
field-installable peripherals is already pre-installed.
2009 Tyco Electronics.
North America
Elo TouchSystem
301 Constitution Drive,
Menlo Park, CA 94025
www.elotouch.com
Installing the
Barcode Scanner for the
15D1 Touchcomputer
Caution:
Before attaching the barcode scanner, make sure that the touchcomputer is powered off.
Elo Technical Support
Online self-help
www.elotouch.com/go/websupport
Technical Support contacts in your region:
www.elotouch.com/go/contactsupport
:
Europe
Tel +32 (0)16 35 21 00
Fax +32 (0)16 35 21 01
elosales@elotouch.com
Asia-Pacific
Tel +81 (45) 478-2161
Fax +81 (45) 478-2180
www.tps.co.jp
Revision A
P/N E428352
Latin America
Tel 1-305-428-5210
Fax 1-305-717-4909
www.elotouch.com.ar
1
T off the
urn power to the
touch
computer.
5
Connect the cable to the
USB connector.
2
5
3
4
Remove the side door,
as shown.
Remove the front door.
Insert the barcode reader
bracket and secure with
screws.
6
Replace the front door.
7
Replace the side door.
8
Turn on the touchcomputer.
Loading...