Tyco TY3255, TY3155, TY3355 Series Manual

Worldwide

Contacts

www.tyco-fire.com

Series DS-1 – 5.6 K-factor, Dry-type Sprinklers
Pendent, Upright, and Horizontal Sidewall
Standard Response, Standard Coverage

General
Description

TYCO Series DS-1 5.6K Pendent,
Upright, and Horizontal Sidewall, Stan­dard Response (5 mm bulb), Standard
Coverage Dry-type Sprinklers are dec­orative glass bulb automatic sprinklers
typically used where:

• pendent sprinklers are required on
dry pipe systems that are exposed
to freezing temperatures (e.g., sprin­kler drops from unheated portions of
buildings)

• sprinklers and /or a portion of the
connecting piping may be exposed
to freezing temperatures (e.g., sprin­kler drops from wet systems into
freezers, sprinkler sprigs from wet
systems into unheated attics, or hor­izontal piping extensions through a
wall to protect unheated areas of a
building such as loading docks, over­hangs, and building exteriors)

• sprinklers are used on systems that
are seasonably drained to avoid
freezing (e.g., vacation resort areas)

IMPORTANT

Refer to Technical Data Sheet
TFP2300 for warnings pertaining to
regulatory and health information.

Always refer to Technical Data
Sheet TFP700 for the “INSTALLER
WARNING” that provides cautions
with respect to handling and instal­lation of sprinkler systems and com­ponents. Improper handling and
installation can permanently damage
a sprinkler system or its compo­nents and cause the sprinkler to fail
to operate in a fire situation or cause
it to operate prematurely.

NOTICE

Series DS-1 Dry-type Sprinklers
described herein must be installed
and maintained in compliance with this
document, as well as with the applica­ble standards of the NATIONAL FIRE
PROTECTION ASSOCIATION (NFPA),
in addition to the standards of any other
authorities having jurisdiction. Failure
to do so may impair the performance
of these devices.

The owner is responsible for main­taining their fire protection system
and devices in proper operating con­dition. Contact the installing contrac­tor or product manufacturer with any
questions.

Series DS-1 Dry-type Sprinklers must
only be installed in fittings that meet
the requirements of the Design Crite­ria section.

Sprinkler
Identification
Numbers (SINs)

TY3255 – Pendent
TY3155 – Upright
TY3355 – Horizontal Sidewall

Technical
Data

Approvals

UL and C-UL Listed
FM Approved
VdS Approved
TY3255 w/Standard Escutcheon only
NYC Approved
under MEA 352-01-E
LPCB Approved
Reference No. 094a /11
CE Certified
Certificate of Conformity No. 0832-

CPD-2015

(Refer to Tables A and B for details.)

Maximum Working Pressure

175 psi (12,1 bar)

Inlet Thread Connections

1 inch NPT
ISO 7-R 1

Discharge Coefficient

K=5.6 gpm/psi

Temperature Ratings

Refer to Tables A and B.

Finishes

Sprinkler: Refer to Table D.
Escutcheon: Refer to Table D.

Physical Characteristics

Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Copper

Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Copper

Yok e ....................... Stainless Steel

Casing .............Galvanized Carbon Steel

Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bronze

Bulb Seat . . . . . . . . . . . . . . . . . . . Stainless Steel

Bulb (5 mm dia.) . . . . . . . . . . . . . . . . . . . . . Glass

Compression Screw . . . . . . . . . . . . . . . . .Bronze

Deflector . . . . . . . . . . . . . . . . . . . . . . . . . .Bronze

Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bronze

Gu i de Tu be . . . . . . . . . . . . . . . . . Stainless Steel

Water Tube . . . . . . . . . . . . . . . . . Stainless Steel

Spring ..................... Stainless Steel

Sealing Assembly ..Beryllium Nickel w/TEFLON

Escutcheon . . . . . . . . . . . . . . . . . . .Carbon Steel

1/2

(80,6 lpm/bar

1/2

)

Page 1 of 10 AUGUST 2018 TFP500

TFP500

Page 2 of 10

SPRINKLER

TYPE

ESCUTCHEON

TYPE

TEMPERATURE

RATI NG

BULB

COLOR CODE

NATURAL

BRASS

135° F (57 °C ) Orange

155° F (68° C) Red

STANDARD

175°F ( 7 9 °C) Yel l ow

200°F (93°C) Green

28 6°F (141°C ) Blue

360°F (182°C) Mauve 1, 2, 3, 6 1, 2, 6

135° F (57 °C ) Orange

155° F (68° C) Red

RECESSED

175°F ( 7 9 °C) Yel l ow

200°F (93°C) Green

28 6°F (141°C ) Blue 1, 2

PENDENT

(TY3255)

360°F (182°C) Mauve N/A

135° F (57 °C ) Orange

155° F (68° C) Red

DEEP

175°F ( 7 9 °C) Yel l ow

200°F (93°C) Green

28 6°F (141°C ) Blue

360°F (182°C) Mauve

135° F (57 °C ) Orange

155° F (68° C) Red

WITHOUT

175°F ( 7 9 °C) Yel l ow

200°F (93°C) Green

28 6°F (141°C ) Blue

360°F (182°C) Mauve 1, 2, 3 1, 2

135° F (57 °C ) Orange

155° F (68° C) Red

UPRIGHT

(TY3155)

WITHOUT

175°F ( 7 9 °C) Yel l ow

200°F (93°C) Green

28 6°F (141°C ) Blue

360°F (182°C) Mauve 1, 2, 3 1, 2

Notes:

1. Listed by Under write rs Lab orato ries, Inc. (UL), maximu m order l ength of 48 inche s

2. Listed by Unde rwr iters L aboratorie s for use in Canada (C-UL), m aximum order length o f 48 inches

3. A pprove d by FM Glob al (FM Ap provals), maxim um orde r length of 48 inch es

4. L oss Prevention C erti cati on Boar d (LPCB) a nd CE conformit y appl y to these te mper ature ra tings only

5. A pprove d by the Cit y of New York un der ME A 352-01-E

6. A pprove d by VdS
* Frame an d deec tor only

N/A – Not App licab le

TABL E A

SERIES DS-1 PENDENT & UPRIGHT DRY-TYPE SPRINKLERS, 5.6K, STANDARD RESPONSE

LABORATORY LISTINGS AND APPROVALS

SPRINKLER FINISH

CHROME

PL AT ED

POLYESTER*

1, 2, 3, 4, 5, 6 1, 2, 4, 5, 6

1, 2, 3, 5 1, 2, 5

1, 2, 3, 4, 5 1, 2, 4, 5

1, 2, 3, 4, 5 1, 2, 4, 5

TFP500

DEFLECTOR

COMPRESSION

WRENCH

WRENCHING AREA

Page 3 of 10

SPRINKLER

TYPE

ESCUTCHEON

TYPE

TEMPERATURE

RATI NG

BULB

COLOR CODE

NATURAL

BRASS

SPRINKLER FINISH

CHROME

PL AT ED

135° F (57 °C ) Orange

155° F (68° C) Red

STANDARD

175°F ( 7 9 °C) Yel l ow

200°F (93°C) Green

28 6°F (141°C ) Blue

360°F (182°C) Mauve

135° F (57 °C ) Orange

155° F (68° C) Red

HSW*

(TY3355)

DEEP

175°F ( 7 9 °C) Yel l ow

200°F (93°C) Green

1**, 2**, 3***, 4, 5 1**, 2**, 4, 5

28 6°F (141°C ) Blue

360°F (182°C) Mauve

135° F (57 °C ) Orange

155° F (68° C) Red

WITHOUT

175°F ( 7 9 °C) Yel l ow

200°F (93°C) Green

28 6°F (141°C ) Blue

360°F (182°C) Mauve 1**, 2* *, 5 1**, 2* *

Notes:

1. Listed by Under write rs Lab orato ries, Inc. (UL), maximu m order l ength of 48 inche s

2. Listed by Unde rwr iters L aboratorie s for use in Canada (C-UL), m aximum order length o f 48 inches

3. A pprove d by FM Glob al (FM Ap provals), maxim um orde r length of 48 inch es

4. L oss Prevention C erti cati on Boar d (LPCB) a nd CE conformit y appl y to these te mper ature ra tings only

5. A pprove d by the Cit y of New York un der ME A 352-01-E
* Horizo ntal si dewall wi th top of deector-to -cei ling dis tance o f 4 to 12 inches (100 to 3 00 mm)
** Light and ordin ary ha zard o ccupa ncies o nly
*** Light hazard occupancies only
**** Fr ame and d eector only

TABL E B

SERIES DS-1 HORIZONTAL SIDEWALL (HSW) DRY-TYPE SPRINKLER, 5.6K, STANDARD RESPONSE

LABORATORY LISTINGS AND APPROVALS

POLYESTER***

PLUG WITH

INLET

SEALING

ASSEMBLY

YOKE

SPRING

INLET
BAND

WATER

TUBE

GUIDE

CASING

INSERT

TUBE

BULB

FRAME

VENT HOLE

SEAT

5 mm BULB

SCREW

FIGURE 1

SERIES DS-1 DRY-T YPE SPRINKLER, 5.6K, STANDARD RESPONSE

AS SEM B LY

WRENCH

RECESS

FLAT

PUSH WRENCH

IN TO ENSURE
ENGAGEMENT

WITH SPRINKLER

FIGURE 2
W-T Y P E 7
WRENCH