Tyco TL405LE Data Sheet

Security | Access | Video | Intrusion | Converged Solutions | Services

Universal Dual Path Communicator
TL405LE

Upgrade Legacy Alarm Panels to Cellular and IP
Connectivity

Landline connectivity is rapidly disappearing from the residential
and small business markets. As consumers abandon their landlines
for mobile phones and carriers switch from PSTN to VoIP networks,
it’s becoming critical to upgrade customers with landline-only alarm
systems to cellular and IP connectivity.

With the Universal Dual Path Communicator (TL405LE), you can
upgrade almost any legacy PSTN panel to LTE and IP and, using the
ConnectAlarm mobile app, enable users to remotely arm, disarm and
check the status of their legacy panels. This solution is a
cost-effective way to enhance your customers’ security, make their
systems smarter and extend the life of their panels.

Data Sheet

Breathe New Life into Legacy Panels

Key Features

• 4G LTE and Ethernet/IP communication channels

• CID to voice message, CID to push and CID to SMS message functions

• EN50136 approved

• Integrated antenna

• Remote programming by DLS 5

• Direct communication with CMS

• 6 programmable terminals (input/ output)

• USB port for local programming

• Connector for optional external antennas

• Optional Li-ion battery for 6 hours autonomy

Strengthen Alarm System Security

With cellular and IP communication, there is no risk of an intruder cutting the phone line, since there is no physical line.
Communications channels are backed up, ensuring that alerts will always be sent to the monitoring service or user.

Make Alarm Systems Smarter

Offer customers advanced functionality that makes their lives easier and more comfortable. The Universal Dual Path Communicator
provides:

• Remote arm/disarm, using a mobile device, by SMS or through the user app

• Basic smart home features, such as control of lights and appliances through dry contact outputs

• Useful information on what is happening – innovative decryption of any Contact ID and SIA codes into clear vocal messages, SMS or

push notification enables real-time detailed notifications of the system status and the alarm, tamper and fault events

• Communication over LTE and IP networks – with monitoring providers using Sur-Gard and PowerManage receivers

• Specific templates for easily controlling DSC PowerSeries and PowerSeries Neo panels via the ConnectAlarm app

Extend Panel Life and Reduce Costs

Empower customers to enhance their security and convenience without the expense of a new security system.

• Upgrade budget-conscious customers to more secure, smarter intrusion protection

• Enable customers without landlines to continue using their PSTN-only panels

• Provide an option for lower-cost cellular and IP communication where available

Key Specifications

• Simulates landline connectivity

• Automatically switches to GSM network and / or IP in the event of landline trouble (line down)

• GSM signal indicator

• 6 programmable terminals as open collector outputs or input lines

• Landline overvoltage protection

• 4G LTE cellular communicator

• Integrated antenna on board

• SMS/voice dialer

• CID to push notification

• Supports Contact ID communication format from a connected control panel for communication over the LTE and IP network

• Cellular / IP communication with Sur-Gard System I-IP/II/III/5 and PowerManage version 4.6 or or higher receivers

• Option to control through the ConnectAlarm user app

• PC-programmable options

• 32 SMS messages, each with a maximum length of 100 characters (2 for each input line plus 6 for status indications and 1 periodic)

• 8 telephone numbers (max. 16 digits) programmable for the SMS dialer

• 8 phone numbers programmable for Contact ID dialer on GPRS

• Up to 32 telephone numbers (max. 16 digits) programmable for the remote activation of the OC outputs

• Remote activation of the outputs through caller identification and/or SMS transmission

• Credit balance check for pre-paid SIM cards

• Panel Transmission Monitor (PTM)

• Integrated tamper switches

• PC-LINK connector

• USB type A connector (host and device)

• Programming through USB memory stick

• Advanced diagnostics and LOG recording

• Local and remote programming and firmware upgrade

• Alarm event transmission over LTE and IP

• Programmable priority between PSTN and cellular/IP

• Two-way voice communication on cellular

• Optional backup battery

• Anti-jamming