Page 1
n
1 pole 16A, 1 form C (CO) or 1 form A (NO) contact
n
Ambient temperature 105°C
n
Sensitive coil 400mW
n
5kV/10mm coil-contact
n
Reinforced insulation
n
WG version: Product in accordance to IEC 60335-1
Typical applications
Oven control, cooking plate control
General Purpose Relays
PCB Relays
Power PCB Relay RTH 105°C 16A
SCHRACK
F0220-D
ZV b
Approvals
VDE REG.-Nr. 6106, UL E214025, cCSAus 14385
Technical data of approved types on request
Contact Data
Contact arrangement 1 form C (CO) or 1 form A (NO)
Rated voltage 250VAC
Max. switching voltage 400VAC
Rated current 16A
Limiting continuous current, form A/form B 16 / 26A
Limiting making current (form A contact)
max. 4 s, duty factor 10 % 30A
Breaking capacity max. 4000VA
Contact material AgNi 90/10
Frequency of operation, with/without load 360/72000h
Operate/release time max. 8/6ms
Bounce time max., form A/form B 4/6ms
Contact ratings
Type Contact Load Cycles
IEC 61810
RTH14 A (NO) 10A, 250VAC resistive,105°C 150x10
RTH14 C (CO) 16A, 250VAC resistive, 105°C 10x10
RTH14 B (NC) 26A, 250VAC resistive, 85°C 500
RTH34 A (NO) 10A, 400VAC resistive, 105°C 150x10
RTHH4 A (NO) 10A, 250VAC resistive, 105°C 250x10
UL 508
RTH14 A/B (NO/NC) 16A, 250VAC, resistive, 105°C 30x10
RTH34 A (NO) 20A, 250VAC, general purpose, 105°C 6x10
Mechanical endurance >30x106 operations
1) Continuous thermal load >10A at 105°C requires reduction of coil power to 64% of
rated power after 100ms
1)
-1
Coil Data
Coil voltage range 5 to 60VDC
Operative range, IEC 61810 90...110% U
Coil insulation system according UL1446 class F
RTD
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
009 9 6.3 0.9 203 399
012 12 8.4 1.2 360 400
024 24 16.8 2.4 1440 400
1) Continuous thermal load > 10 A at 105°C requires reduction of coil power to 64% of
rated power after 100ms.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
3
3
3
3
3
3
Insulation Data
Initial dielectric strength
between open contacts 1000V
between contact and coil 5000V
Clearance/creepage
between contact and coil ≥10/10mm
Material group of insulation parts IIIa
Tracking index of relay base PTI250V
rms
rms
1)
1)
1)
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
1
tion, application notes and all specifications
are subject to change.
Page 2
General Purpose Relays
PCB Relays
Power PCB Relay RTH 105°C 16A (Continued)
SCHRACK
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Resistance to heat and fire
WG version according EN 60335-1, par.30
Ambient temperature -40 to 105°C
Category of environmental protection
IEC 61810 RTII - flux proof
Vibration resistance (functional)
form A/form B contact, 30 to 150Hz 20/5g
Shock resistance (destructive) 100g
Terminal type PCB-THT
Weight 14g
Resistance to soldering heat THT
IEC 60068-2-20 270°C/10s
Packaging/unit tube/20 pcs., box/500 pcs.
Dimensions
PCB layout / terminal assignment
Bottom view on solder pins
16 A, pinning 5 mm
*) With the recommended PCB hole sizes a grid
pattern from 2.5 mm to 2.54 mm can be used.
1 form C (CO) contact
1 form A (NO) contact
S0418-CA
S0163-BE
S0272-BA
S0163-BF
Product code structure Typical product code RT H 3 4 012 WG
Type
RT Power PCB Relay RTH 105°C 16A
Version
H 16A, pinning 5mm, 105°C
Contact configuration
1 1 form C (CO) contact
3 1 form A (NO) contact H 1 form A (NO) contact „High Performance“
Contact material
4 AgNi 90/10
Coil
Coil code: please refer to coil versions table
Version
Blank Standard version
WG Product in accordance with IEC 60335-1 (domestic appliances)
Product code Version Contact configuration Contact Material Coil Part number
RTH14012 16A, 105°C 1 form C (CO) AgNi 90/10 12VDC 8-1415006-1
RTH14012WG contact 1-1415538-1
RTH14024WG 24VDC 9-1415535-4
RTH34012 1 form A (NO) 12VDC 9-1415006-1
RTH34012WG contact 1-1415536-9
RTH34024 24VDC 1415039-1
RTH34024WG 2-1415536-0
RTHH4009WG 16A, 105°C, 9VDC 1-1415540-6
RTHH4012 High Performance 12VDC 8-1415047-1
RTHH4012WG 4-1415536-2
RTHH4024 24VDC 9-1415047-1
This list represents the most common types and does not show all variants covered by this datasheet.
Other types on request
2
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
Loading...