Page 1
General Purpose Relays
1
SCHRACK
Datasheet Rev. HC1
Issued 2008/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical parameters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.
Power PCB Relay RT1
I
1 pole 12 / 16 A, 1 CO or 1 NO contact
I
DC- or AC-coil
I
Sensitive coil 400 mW
I
5 kV / 10 mm coil-contact, reinforced insulation
I
Ambient temperature 85°C (DC-coil)
I
WG version: Product in accordance to IEC60335-1
I
RoHS compliant (Directive 2002/95/EC)
as per product date code 0413
Applications
Boiler control, timers, garage door control, POS automation,
interface modules
F0144-B
Approvals
V
REG.-Nr. 6106,
Z E214025, b 14385, B C0786, H 98.4118.01,
Technical data of approved types on request
Contact data
Contact configuration 1 CO or 1 NO contact
Contact set single contact
Type of interruption micro disconnection
Rated current 12 A 16 A
Rated voltage / max.switching voltage AC 250/400 VAC
Limiting continuous current UL: 20 A
Maximum breaking capacity AC 3000 VA 4000 VA
Limiting making capacity, max 4 s, df 10% 25 A 30 A
Contact material AgNi 90/10, AgNi 90/10 gold plated
Mechanical endurance DC coil > 30 x 106cycles
AC coil > 10 x 106cycles
Rated frequency of operation with / without load 6 / 1200 min
-1
Contact ratings
Type Load Cycles
RT314 16 A, 250 VAC, NO contact, 85°C, DF 10%, UL508 50x10
3
RT314 16 A, 250 VAC, NC contact, 70°C, 30min
-1
53x10
3
RT314 20 A, 250 VAC, NO contact, 85°C, UL508 6x10
3
RT314 1000 W incandescent lamp, 250 VAC 1.2x10
3
RT314 10 A, 250 VAC, cosϕ=0.6, CO contact, 70°C 200x10
3
RT314 5 A / 2 A, 250 VAC, cosϕ=1, motor, NO contact, 10min-1, 70°C 1.1x10
6
RT314 0.26 A / 0.01 A, 230 VAC, cosϕ=0.38, valve, NO contact, 25min-17.6x10
6
RT314 Pilot duty A300 (NO contact), B300 (CO/NC contact), UL508
RT314 1hp @ 240 VAC, 1/2hp @ 120 VAC, NO contact, UL508
RT314 AC15, 6 A, 250 VAC, NO and NC contact, 85°C, EN60947-5-1
RT314 DC13, 2 A / 24 VDC, 0.2 A / 250 VDC, NO and NC contact, 85°C, EN60947-5-1
Coil data
Rated coil voltage range DC coil 5...110 VDC
AC coil 24...230 VAC
Coil power DC coil typ 400 mW
AC coil typ 0.75 VA
Operative range 2
Coil insulation system according UL1446 class F
Page 2
General Purpose Relays
2
SCHRACK
Datasheet Rev. HC1
Issued 2008/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical parameters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.
Power PCB Relay RT1 (Continued)
Coil versions, DC-coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ohm mW
005 5 3.5 0.5 62+10% 403
006 6 4.2 0.6 90+10% 400
009 9 6.3 0.9 200+10% 400
012 12 8.4 1.2 360+10% 400
024 24 16.8 2.4 1440+10% 400
048 48 33.6 4.8 5520+10% 417
060 60 42.0 6.0 8570+12% 420
110 110 77.0 11.0 28800+12% 420
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request
Coil versions, AC-coil 50Hz
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
50 Hz 50 Hz 50 Hz
VAC VA C VA C Oh m VA
524 24 18.0 3.6 350+10% 0.76
615 115 86.3 17.3 8100+15% 0.76
620 120 90.0 18.0 8800+15% 0.75
700 200 150.0 30.0 24350+15% 0.76
730 230 172.5 34.5 32500+15% 0.74
All figures are given for coil without preenergization, at ambient temperature +23°C
Insulation
Dielectric strength coil-contact circuit 5000 V
rms
open contact circuit 1000 V
rms
Clearance / creepage coil-contact circuit W 10 / 10 mm
Material group of insulation parts W IIIa
Tracking index of relay base PTI 250 V
Insulation to IEC 60664-1
Type of insulation coil-contact circuit reinforced
open contact circuit functional
Rated insulation voltage 250 V
Pollution degree 12 A version 3 3
16 A version 3 2
Rated voltage system 240 V 400 V
Overvoltage category III
Other data
RoHS - Directive 2002/95/EC compliant as per product date code 0413
Flammability class according to UL94 V-0
For WG version: GWFI to IEC 60335-1 (IEC 60695-2-12) > 850 °C
GWIT to IEC 60335-1 (IEC 60695-2-13) > 755 °C
Ambient temperature range DC coil -40...+85°C
AC coil -40...+70°C
Operate- / release time DC coil typ 7 / 3 ms
Bounce time DC coil, NO / NC contact typ 1 / 3 ms
Vibration resistance (function), NO / NC contact 20 / 5 g, 30 ... 500 Hz
Shock resistance (destruction) 100 g
Category of protection RTII - flux proof, RTIII - wash tight
Mounting pcb or on socket
Mounting position any
Mounting distance DC / AC coils 0 / 2.5 mm
Resistance to soldering heat flux-proof version 270°C / 10 s
wash-tight version 260°C / 5 s
Relay weight 14 g
Packaging unit 20 / 500 pcs
Accessories
For details see datasheet Accessories Power Relay RT
Page 3
General Purpose Relays
3
SCHRACK
Datasheet Rev. HC1
Issued 2008/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical parameters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.
Power PCB Relay RT1 (Continued)
Product key
RT
Type
Version
1
1122 AA,, ppiinnnniinngg 33..55 mmmm,, fflluuxx pprrooooff
B 12 A, pinning 3.5 mm, wash tight
2 12 A, pinning 5 mm, flux proof *)
3
1166 AA,, ppiinnnniinngg 55 mmmm,, fflluuxx pprrooooff
D 16 A, pinning 5 mm, wash tight
Contact configuration
1 1 CO contact 3 1 NO contact
Contact material
4 AgNi 90/10 5 AgNi 90/10 gold plated (for type RT31.)
Coil
Coil code: please refer to coil versions table
Version
Blank Standard version
WG Product in accordance with IEC 60335-1 (domestic appliances)
Preferred types in bold print
*) Wash tight version on request
PCB layout / terminal assignment
Bottom view on solder pins
Dimensions
12 A, pinning 3.5 mm
1 CO contact
1 NO contact
12 A, pinning 5 mm
1 CO contact
1 NO contact
16 A, pinning 5 mm
1 CO contact
1 NO contact
S0418-CB S0418-CN S0418-CA
S0163-BE
S0163-BC
S0163-BG
S0163-BH
S0163-BD
S0163-BF
S0272-BB
*) With the recommended PCB hole sizes a grid
pattern from 2.5 mm to 2.54 mm can be used.
Page 4
General Purpose Relays
4
SCHRACK
Datasheet Rev. HC1
Issued 2008/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical parameters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.
Power PCB Relay RT1 (Continued)
Product key Version Contacts Cont. material Coil Coil Part number
RT114005 12 A 1 CO contact AgNi 90/10 DC-coil 5 VDC 0-1393239-7
RT114006 pinning 3.5 mm 6 VDC 0-1393239-8
RT114012 flux proof 12 VDC 0-1419108-1
RT114024 24 VDC 1-1393239-3
RT114048 48 VDC 1-1393239-4
RT114110 110 VDC 1-1393239-6
RT114524 AC-coil 24 VAC 1-1393239-7
RT114615 115 VAC 1-1393239-8
RT114730 230 VAC 1-1393239-9
RT134012 1 NO contact DC-coil 12 VDC 2-1393239-6
RT134024 24 VDC 3-1393239-0
RT214012 12 A, pinning 5mm 1 CO contact 12 VDC 5-1393239-4
RT214024 flux proof 24 VDC 5-1393239-5
RT314005 16 A 5 VDC 9-1393239-1
RT314006 pinning 5 mm 6 VDC 9-1393239-3
RT314012 flux proof 12 VDC 9-1393239-5
RT314024 24 VDC 9-1393239-8
RT314048 48 VDC 0-1393240-1
RT314060 60 VDC 0-1393240-2
RT314110 110 VDC 0-1393240-3
RT314524 AC-coil 24 VAC 0-1393240-4
RT314615 115 VAC 0-1393240-6
RT314730 230 VAC 0-1393240-7
RT315012 AgNi 90/10 DC-coil 12 VDC 1-1393240-1
RT315024 gold plated 24 VDC 1-1393240-4
RT315730 AC-coil 230 VAC 1-1419108-1
RT334012 1 NO contact AgNi 90/10 DC-coil 12 VDC 4-1393240-5
RT334024 24 VDC 4-1393240-8
RT334048 48 VDC 5-1393240-0
RTB14005 12 A 1 CO contact 5 VDC 1-1393238-2
RTB14012 pinning 3.5 mm 12 VDC 1-1393238-5
RTB14024 wash tight 24 VDC 1-1393238-9
RTB14048 48 VDC 2-1393238-1
RTD14005 16 A 5 VDC 5-1393238-9
RTD14006 pinning 5 mm 6 VDC 6-1393238-0
RTD14012 wash tight 12 VDC 6-1393238-2
RTD14015 15 VDC 6-1393238-4
RTD14024 24 VDC 6-1393238-8
RTD14048 48 VDC 6-1393238-9
RTD34005 1 NO contact 5 VDC 8-1393238-3
RTD34012 12 VDC 3-1419108-5
RTD34024 24 VDC 3-1419108-8
Loading...