TYAN S7056, S7056-HE User Giude
http://www.tyan.com
1
S7056/S7056-HE
Version 1.1b
Copyright
Copyright © 2013 MiTAC International Corporation. All rights reserved. No part of
this manual may be reproduced or translated without prior written consent from
MiTAC International Corporation.
Trademark
All registered and unregistered trademarks and company names contained in this
manual are property of their respective owners including, but not limited to the
following.
TYAN® is a trademark of MiTAC International Corporation.
Intel
®
is a trademark of Intel® Corporation.
AMI, AMI BIOS are trademarks of AMI Technologies.
Microsoft®, Windows® are trademarks of Microsoft Corporation.
Winbond
®
is a trademark of Winbond Electronics Corporation.
Notice
Information contained in this document is furnished by MiTAC International
Corporation and has been reviewed for accuracy and reliability prior to printing.
MiTAC assumes no liability whatsoever, and disclaims any express or implied
warranty, relating to sale and/or use of TYAN
®
products including liability or
warranties relating to fitness for a particular purpose or merchantability. MiT A C
retains the right to make changes to product descriptions and/or specifications at
any time, without notice. In no event will MiTAC be held liable for any direc t or
indirect, incidental or consequential damage, loss of use, loss of data or other
malady resulting from errors or inaccuracies of information contained in this
document.
http://www.tyan.com
2
http://www.tyan.com
3
Contents
Before you begin…....................................................................................4
Chapter 1: Instruction ................................................................................5
1.1 Congratulations ................................................................................5
1.2 Hardware Specifications..................................................................5
1.3 Software Specifications..................................................................27
Chapter 2: Board Installation................................................................... 29
2.1 Board Image...................................................................................30
2.2 Block Diagram................................................................................32
2.3 Board Parts, Jumpers and Connectors..........................................33
2.4 Installing the Processor and Heatsink............................................46
2.5 Thermal Interface Material .............................................................49
2.6 Tips on Installing Motherboard in Chassis .....................................50
2.7 Installing the Memory .....................................................................52
2.8 Attaching Drive Cables...................................................................60
2.9 Installing Add-In Cards...................................................................61
2.10 Connecting External Devices.........................................................62
2.11 Installing the Power Supply............................................................63
2.12 Finishing Up....................................................................................64
Chapter 3: BIOS Setup ............................................................................. 65
3.1 About the BIOS...............................................................................65
3.2 Main Menu......................................................................................67
3.3 Advanced Menu..............................................................................68
3.4 Chipset Menu .................................................................................96
3.5 Boot ..............................................................................................106
3.6 Security.........................................................................................111
3.7 Server Management.....................................................................112
3.8 Event Logs....................................................................................115
3.9 Save & Exit...................................................................................116
Chapter 4: Diagnostics........................................................................... 119
4.1 Flash Utility...................................................................................119
4.2 AMIBIOS Post Code (Aptio).........................................................120
Appendix I: Fan and Temp Sensors .....................................................127
Appendix II: RAID OPROM Configuration ............................................131
Glossary................................................................................................... 133
Technical Support ..................................................................................139
http://www.tyan.com
4
Before you begin…
Check the box contents!
The retail motherboard package should contain the following:
1 x S7056 Motherboard
2 x SATA Single Cable
1 x Mini-SAS Cable
1 x IO shielding
1 x S7056 Quick Installation Guide
1 x TYAN® Driver CD
IMPORTANT NOTE:
Sales samples may not come with any of the accessories listed above.
If you have ordered a sales sample and you are missing any of the above i tems,
please contact your sales representative to help order accessories.
NOTE: The SATA Single Cables, Mini-SAS Cable and IO Shielding are n ot included
in bulk packing.
http://www.tyan.com
5
Chapter 1: Instruction
1.1 Congratulations
You have purchased the powerful TYAN® S7056 motherboard, based on the
Intel
®
Patsburg chipset. The S7056 is designed to support dual Intel® Xeon E5-
2600/E5-2600 v2 Series processors, and up to 512GB RDIMM, 128GB UDIMM
and 512GB LRDIMM DDR3 memory. Leveraging advanced technology from
Intel
®
, the S7056 is capable of offering scalable 32 and 64-bit computing, highbandwidth memory design, and lightning-fast PCI-E bus implementation.
The S7056 not only empowers you in today’s demand ing IT environment but also
offers a smooth path for future application upgradeability. All of these rich feature
sets provide the S7056 with the power and flexibility to meet demanding
requirements for today’s IT environments.
Remember to visit the TYAN® website at http://www.tyan.com. There you can
find all the information on all TYAN® products as well as all the supporting
documentation, FAQs, Drivers and BIOS upgrades.
1.2 Hardware Specifications
TYAN S7056 (S7056GM3NR)
Supported CPU
Series
Intel Xeon Processor E5-2600/E5-2600 v2 Series
Socket Type / Q’ty LGA2011 / (2)
Thermal Design
Power (TDP)
wattage
Max up to 95W
Processor
System Bus
Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath
Interconnect (QPI) support
Chipset PCH Intel C602
Supported DIMM
Qty
(8)+(8) DIMM slots
DIMM Type / Speed
UDIMM/RDIMM/LRDIMM ECC 1066 / 1333 / 1600 /
1866 *Speed 1866 only for 1 slot per channel 1.5V
(Blue color DIMM slot )
Capacity
up to 128GB UDIMM / 512GB RDIMM / 512GB
LRDIMM
Memory channel
4 Channels per CPU / Support 2 R/LR-DIMMs or 2
UDIMMs per channel
Memory
Memory voltage 1.5V or 1.35V
http://www.tyan.com
6
PCI-E
(2) sets of the following expansion combination: (1)
PCI-E x16 slot in-lined with / (1) PCI-E x4 slot
(routed to PCI-E x8 bus) recommended to use
TYAN riser card
Expansion Slots
Recommended
TYAN Riser Card
M7056-L24-3F, PCI-E x16 2U riser card (left) /
M7056-R24-3F, PCI-E x16 2U riser card (right)
Recommended
Barebone /
Chassis
2U Barebone GN70-B7056
Port Q’ty (3) GbE ports
LAN
Controller Intel 82574L / Intel I350BT2
Connector (10) SATA
Controller Intel C602
Speed
(2) 6.0 Gb/s (blue color), (8) 3.0 Gb/s (2 x mini-SAS
connector)
Storage SATA
RAID RAID 0/1/10/5 (Intel RST)
Connector type D-Sub 15-pin
Resolution Up to 1920x1200
Graphic
Chipset Aspeed AST2300
USB
(7) USB2.0 ports (2 at rear, 4 via cable, 1 type A
onboard)
COM (1) header / (1) port (rear)
VGA (1) D-Sub 15-pin VGA port
RJ-45 (3) GbE ports
Power
SSI 24-pin + 8-pin + 8-pin power connectors / SSI
EEB spec. 2008
Front Panel (1) 2x12-pin SSI front panel header
Input /Output
SATA
(2) SATA-III connectors + (2) Mini-SAS (4-in-1)
connectors
Chipset Nuvoton 83773G
Voltage
Monitors voltage for CPU, memory, chipset & power
supply
Fan Total (7) 4-pin headers
Temperature
Monitors temperature for CPU & system
environment
System
Monitoring
Others Watchdog timer support
Onboard Chipset Onboard Aspeed AST2300
AST2300 IPMI
Feature
IPMI 2.0 compliant baseboard management
controller (BMC) / Supports storage over IP and
remote platform-flash / USB 2.0 virtual hub
Server
Management
AST2300 iKVM
Feature
24-bit high quality video compression / 10/100 Mb/s
MAC interface
Brand / ROM size AMI / 8MB
BIOS
Feature Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3
http://www.tyan.com
7
/
PXE boot / ACPI 2.0 power management /Power on
mode after power recovery / User-configurable H/W
monitoring / Auto-configurable of hard disk types
Form Factor EATX
Physical
Dimension
Board Dimension 12”x13” (305x330mm)
Operating System OS supported list Please visit our Web site for the latest update.
FCC (DoC) Class A
Regulation
CE (DoC) Yes
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
Non-operating
Temp.
- 40° C ~ 70° C (-40° F ~ 158° F)
Operating
Environment
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6
Compliant
Yes
Motherboard (1) S7056 Motherboard
Manual (1) Quick Installation Guide
Installation CD (1) TYAN installation CD
I/O Shield (1) I/O Shield
Package
Contains
Cable SATA
(2) SATA signal cables / (1) Mini-SAS cable to 4 x
SATA cables
http://www.tyan.com
8
TYAN S7056 (S7056WGM3NR)
Supported CPU
Series
Intel Xeon Processor E5-2600/E5-2600 v2 Series
Socket Type / Q’ty LGA2011 / (2)
Thermal Design
Power (TDP)
wattage
Max up to 95W
Processor
System Bus
Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath
Interconnect (QPI) support
Chipset PCH Intel C602 with upgrade ROM module
Supported DIMM
Qty
(8)+(8) DIMM slots
DIMM Type / Speed
UDIMM/RDIMM/LRDIMM ECC 1066 / 1333 / 1600 /
1866 *Speed 1866 only for 1 slot per channel 1.5V
(Blue color DIMM slot )
Capacity
up to 128GB UDIMM / 512GB RDIMM / 512GB
LRDIMM
Memory channel
4 Channels per CPU / Support 2 R/LR-DIMMs or 2
UDIMMs per channel
Memory
Memory voltage 1.5V or 1.35V
PCI-E
(2) sets of the following expansion combination: (1)
PCI-E x16 slot in-lined with / (1) PCI-E x4 slot
(routed to PCI-E x8 bus) recommended to use
TYAN riser card
Expansion Slots
Recommended
TYAN Riser Card
M7056-L24-3F, PCI-E x16 2U riser card (left) /
M7056-R24-3F, PCI-E x16 2U riser card (right)
Recommended
Barebone /
Chassis
2U Barebone GN70-B7056
Port Q’ty (3) GbE ports
LAN
Controller Intel 82574L / Intel I350BT2
Connector (8) SAS
Controller Intel C602 with TRK-5 upgrade ROM module
Speed 3.0 Gb/s (mini-SAS connector)
SAS
RAID RAID 0/1/10 (Intel Integrated RAID upgrade ROM 5)
Connector (6) SATA
Controller Intel C602
Speed
(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (mini-SAS
connector)
Storage
SATA
RAID RAID 0/1/10/5 (Intel RST)
Connector type D-Sub 15-pin
Resolution Up to 1920x1200
Graphic
Chipset Aspeed AST2300
http://www.tyan.com
9
USB
(7) USB2.0 ports (2 at rear, 4 via cable, 1 type A
onboard)
COM (1) header / (1) port (rear)
SAS (2) Mini-SAS (4-in-1) connectors
VGA (1) D-Sub 15-pin VGA port
RJ-45 (3) GbE ports
Power
SSI 24-pin + 8-pin + 8-pin power connectors / SSI
EEB spec. 2008
Front Panel (1) 2x12-pin SSI front panel header
Input /Output
SATA (1) Mini-SAS connector & (2) SATA-III connectors
Chipset Nuvoton 83773G
Voltage
Monitors voltage for CPU, memory, chipset & power
supply
Fan Total (7) 4-pin headers
Temperature
Monitors temperature for CPU & system
environment
System
Monitoring
Others Watchdog timer support
Onboard Chipset Onboard Aspeed AST2300
AST2300 IPMI
Feature
IPMI 2.0 compliant baseboard management
controller (BMC) / Supports storage over IP and
remote platform-flash / USB 2.0 virtual hub
Server
Management
AST2300 iKVM
Feature
24-bit high quality video compression / 10/100 Mb/s
MAC interface
Brand / ROM size AMI / 8MB
BIOS
Feature
Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3
/
PXE boot / ACPI 2.0 power management /Power on
mode after power recovery / User-configurable H/W
monitoring / Auto-configurable of hard disk types
Form Factor EATX
Physical
Dimension
Board Dimension 12”x13” (305 x33 0mm)
Operating System OS supported list Please visit our Web site for the latest update.
FCC (DoC) Class A
Regulation
CE (DoC) Yes
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
Non-operating
Temp.
- 40° C ~ 70° C (-40° F ~ 158° F)
Operating
Environment
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6
Compliant
Yes
Motherboard (1) S7056 Motherboard
Manual (1) Quick Installation Guide
Installation CD (1) TYAN installation CD
Package
Contains
I/O Shield (1) I/O Shield
http://www.tyan.com
10
Cable SATA
(2) SATA signal cables / (1) Mini-SAS cable to 4 x
SATA cables
http://www.tyan.com
11
TYAN S7056 (S7056WGM3NR-2T)
Supported CPU
Series
Intel Xeon Processor E5-2600/E5-2600 v2 Series
Socket Type / Q’ty LGA2011 / (2)
Thermal Design
Power (TDP)
wattage
Max up to 95W
Processor
System Bus
Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath
Interconnect (QPI) support
Chipset PCH Intel C602 with upgrade ROM module
Supported DIMM
Qty
(8)+(8) DIMM slots
DIMM Type / Speed
UDIMM/RDIMM/LRDIMM ECC 1066 / 1333 / 1600
/ 1866 *Speed 1866 only for 1 slot per channel
1.5V (Blue color DIMM slot )
Capacity
up to 128GB UDIMM / 512GB RDIMM / 512GB
LRDIMM
Memory channel
4 Channels per CPU / Support 2 R/LR-DIMMs or 2
UDIMMs per channel
Memory
Memory voltage 1.5V or 1.35V
PCI-E
(2) sets of the following expansion combination: (1)
PCI-E x16 slot in-lined with / (1) PCI-E x4 slot
(routed to PCI-E x8 bus) recommended to use
TYAN riser card
Expansion Slots
Recommended
TYAN Riser Card
M7056-L24-3F, PCI-E x16 2U riser card (left) /
M7056-R24-3F, PCI-E x16 2U riser card (right)
Recommended
Barebone /
Chassis
2U Barebone GN70-B7056
Port Q’ty (1) GbE port, (2) 10 GbE ports
LAN
Controller Intel 82574L / Intel X540-AT2
Connector (8) SAS
Controller Intel C602 with TRK-5 upgrade ROM module
Speed 3.0 Gb/s (mini-SAS connector)
SAS
RAID
RAID 0/1/10 (Intel Integrated RAID upgrade ROM
5)
Connector (6) SATA
Controller Intel C602
Speed
(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (mini-SAS
connector)
Storage
SATA
RAID RAID 0/1/10/5 (Intel RST)
Connector type D-Sub 15-pin
Graphic
Resolution Up to 1920x1200
http://www.tyan.com
12
Chipset Aspeed AST2300
USB
(7) USB2.0 ports (2 at rear, 4 via cable, 1 type A
onboard)
COM (1) header / (1) port (rear)
SAS (2) Mini-SAS (4-in-1) connectors
VGA (1) D-Sub 15-pin VGA port
RJ-45 (1) GbE port / (2) 10Gbe Ports
Power
SSI 24-pin + 8-pin + 8-pin power connectors / SSI
EEB spec. 2008
Front Panel (1) 2x12-pin SSI front panel header
Input /Output
SATA (1) Mini-SAS connector & (2) SATA-III connectors
Chipset Nuvoton 83773G
Voltage
Monitors voltage for CPU, memory, chipset &
power supply
Fan Total (7) 4-pin headers
Temperature
Monitors temperature for CPU & system
environment
System
Monitoring
Others Watchdog timer support
Onboard Chipset Onboard Aspeed AST2300
AST2300 IPMI
Feature
IPMI 2.0 compliant baseboard management
controller (BMC) / Supports storage over IP and
remote platform-flash / USB 2.0 virtual hub
Server
Management
AST2300 iKVM
Feature
24-bit high quality video compression / 10/100 Mb/s
MAC interface
Brand / ROM size AMI / 8MB
BIOS
Feature
Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3
/PXE boot / ACPI 2.0 power management /Power
on mode after power recovery / User-configurable
H/W monitoring / Auto-configurable of hard disk
types
Form Factor EATX
Physical
Dimension
Board Dimension 12”x13” (305x330mm)
Operating
System
OS supported list Please visit our Web site for the latest update.
FCC (DoC) Class A
Regulation
CE (DoC) Yes
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
Non-operating
Temp.
- 40° C ~ 70° C (-40° F ~ 158° F)
Operating
Environment
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6
Compliant
Yes
Package
Motherboard (1) S7056 Motherboard
http://www.tyan.com
13
Manual (1) Quick Installation Guide
Installation CD (1) TYAN installation CD
I/O Shield (1) I/O Shield
Contains
Cable SATA
(2) SATA signal cables / (1) Mini-SAS cable to 4 x
SATA cables
http://www.tyan.com
14
TYAN S7056 (S7056WGM3NR5 [BTO])
Supported CPU
Series
Intel Xeon Processor E5-2600/E5-2600 v2 Series
Socket Type / Q’ty LGA2011 / (2)
Thermal Design
Power (TDP)
wattage
Max up to 95W
Processor
System Bus
Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath
Interconnect (QPI) support
Chipset PCH Intel C602 with upgrade ROM module
Supported DIMM
Qty
(8)+(8) DIMM slots
DIMM Type / Speed
UDIMM/RDIMM/LRDIMM ECC 1066 / 1333 / 1600 /
1866 *Speed 1866 only for 1 slot per channel 1.5V
(Blue color DIMM slot )
Capacity
up to 128GB UDIMM / 512GB RDIMM / 512GB
LRDIMM
Memory channel
4 Channels per CPU / Support 2 R/LR-DIMMs or 2
UDIMMs per channel
Memory
Memory voltage 1.5V or 1.35V
PCI-E
(2) sets of the following expansion combination: (1)
PCI-E x16 slot in-lined with / (1) PCI-E x4 slot
(routed to PCI-E x8 bus) recommended to use
TYAN riser card
Expansion Slots
Recommended
TYAN Riser Card
M7056-L24-3F, PCI-E x16 2U riser card (left) /
M7056-R24-3F, PCI-E x16 2U riser card (right)
Recommended
Barebone /
Chassis
2U Barebone GN70-B7056
Port Q’ty (3) GbE ports
LAN
Controller Intel 82574L / Intel I350BT2
Connector (8) SAS
Controller Intel C602 with TRK-6 upgrade ROM module
Speed 3.0 Gb/s (mini-SAS connector)
SAS
RAID
RAID 0/1/10/5 (Intel Integrated RAID upgrade ROM
6)
Connector (6) SATA
Controller Intel C602
Speed
(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (mini-SAS
connector)
Storage
SATA
RAID RAID 0/1/10/5 (Intel RST)
Connector type D-Sub 15-pin
Resolution Up to 1920x1200
Graphic
Chipset Aspeed AST2300
http://www.tyan.com
15
USB
(7) USB2.0 ports (2 at rear, 4 via cable, 1 type A
onboard)
COM (1) header / (1) port (rear)
SAS (2) Mini-SAS (4-in-1) connectors
VGA (1) D-Sub 15-pin VGA port
RJ-45 (3) GbE ports
Power
SSI 24-pin + 8-pin + 8-pin power connectors / SSI
EEB spec. 2008
Front Panel (1) 2x12-pin SSI front panel header
Input /Output
SATA (1) Mini-SAS connector & (2) SATA-III connectors
Chipset Nuvoton 83773G
Voltage
Monitors voltage for CPU, memory, chipset & power
supply
Fan Total (7) 4-pin headers
Temperature
Monitors temperature for CPU & system
environment
System
Monitoring
Others Watchdog timer support
Onboard Chipset Onboard Aspeed AST2300
AST2300 IPMI
Feature
IPMI 2.0 compliant baseboard management
controller (BMC) / Supports storage over IP and
remote platform-flash / USB 2.0 virtual hub
Server
Management
AST2300 iKVM
Feature
24-bit high quality video compression / 10/100 Mb/s
MAC interface
Brand / ROM size AMI / 8MB
BIOS
Feature
Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3
/
PXE boot / ACPI 2.0 power management /Power on
mode after power recovery / User-configurable H/W
monitoring / Auto-configurable of hard disk types
Form Factor EATX
Physical
Dimension
Board Dimension 12”x13” (305 x33 0mm)
Operating System OS supported list Please visit our Web site for the latest update.
FCC (DoC) Class A
Regulation
CE (DoC) Yes
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
Non-operating
Temp.
- 40° C ~ 70° C (-40° F ~ 158° F)
Operating
Environment
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6
Compliant
Yes
Motherboard (1) S7056 Motherboard
Manual (1) Quick Installation Guide
Installation CD (1) TYAN installation CD
Package
Contains
I/O Shield (1) I/O Shield
http://www.tyan.com
16
Cable SATA
(2) SATA signal cables / (1) Mini-SAS cable to 4 x
SATA cables
http://www.tyan.com
17
TYAN S7056 (S7056GM3NR-HE)
Supported CPU
Series
Intel Xeon Processor E5-2600/E5-2600 v2 Series
Socket Type / Q’ty LGA2011 / (2)
Thermal Design
Power (TDP)
wattage
Max up to 150W
Processor
System Bus
Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath
Interconnect (QPI) support
Chipset PCH Intel C602
Supported DIMM
Qty
(8)+(8) DIMM slots
DIMM Type / Speed
UDIMM/RDIMM/LRDIMM ECC 1066 / 1333 / 1600 /
1866 *Speed 1866 only for 1 slot per channel 1.5V
(Blue color DIMM slot )
Capacity
up to 128GB UDIMM / 512GB RDIMM / 512GB
LRDIMM
Memory channel
4 Channels per CPU / Support 2 R/LR-DIMMs or 2
UDIMMs per channel
Memory
Memory voltage 1.5V or 1.35V
PCI-E
(2) sets of the following expansion combination: (1)
PCI-E x16 slot in-lined with / (1) PCI-E x4 slot
(routed to PCI-E x8 bus) recommended to use
TYAN riser card
Expansion Slots
Recommended
TYAN Riser Card
M7056-L24-3F, PCI-E x16 2U riser card (left) /
M7056-R24-3F, PCI-E x16 2U riser card (right)
Recommended
Barebone /
Chassis
2U Barebone GN70-B7056
Port Q’ty (3) GbE ports
LAN
Controller Intel 82574L / Intel I350BT2
Connector (10) SATA
Controller Intel C602
Speed
(2) 6.0 Gb/s (blue color), (8) 3.0 Gb/s (2 x mini-SAS
connector)
Storage SATA
RAID RAID 0/1/10/5 (Intel RST)
Connector type D-Sub 15-pin
Resolution Up to 1920x1200
Graphic
Chipset Aspeed AST2300
USB
(7) USB2.0 ports (2 at rear, 4 via cable, 1 type A
onboard)
COM (1) header / (1) port (rear)
VGA (1) D-Sub 15-pin VGA port
Input /Output
RJ-45 (3) GbE ports
http://www.tyan.com
18
Power
SSI 24-pin + 8-pin + 8-pin power connectors / SSI
EEB spec. 2008
Front Panel (1) 2x12-pin SSI front panel header
SATA
(2) SATA-III connectors + (2) Mini-SAS (4-in-1)
connectors
Chipset Nuvoton 83773G
Voltage
Monitors voltage for CPU, memory, chipset & power
supply
Fan Total (7) 4-pin headers
Temperature
Monitors temperature for CPU & system
environment
System
Monitoring
Others Watchdog timer support
Onboard Chipset Onboard Aspeed AST2300
AST2300 IPMI
Feature
IPMI 2.0 compliant baseboard management
controller (BMC) / Supports storage over IP and
remote platform-flash / USB 2.0 virtual hub
Server
Management
AST2300 iKVM
Feature
24-bit high quality video compression / 10/100 Mb/s
MAC interface
Brand / ROM size AMI / 8MB
BIOS
Feature
Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3
/
PXE boot / ACPI 2.0 power management /Power on
mode after power recovery / User-configurable H/W
monitoring / Auto-configurable of hard disk types
Form Factor EATX
Physical
Dimension
Board Dimension 12”x13” (305 x33 0mm)
Operating System OS supported list Please visit our Web site for the latest update.
FCC (DoC) Class A
Regulation
CE (DoC) Yes
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
Non-operating
Temp.
- 40° C ~ 70° C (-40° F ~ 158° F)
Operating
Environment
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6
Compliant
Yes
Motherboard (1) S7056 Motherboard
Manual (1) Quick Installation Guide
Installation CD (1) TYAN installation CD
I/O Shield (1) I/O Shield
Package
Contains
Cable SATA
(2) SATA signal cables / (1) Mini-SAS cable to 4 x
SATA cables
http://www.tyan.com
19
TYAN S7056 (S7056WGM3NR-HE)
Supported CPU
Series
Intel Xeon Processor E5-2600/E5-2600 v2 Series
Socket Type / Q’ty LGA2011 / (2)
Thermal Design
Power (TDP)
wattage
Max up to 150W
Processor
System Bus
Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath
Interconnect (QPI) support
Chipset PCH Intel C602 with upgrade ROM module
Supported DIMM
Qty
(8)+(8) DIMM slots
DIMM Type / Speed
UDIMM/RDIMM/LRDIMM ECC 1066 / 1333 / 1600 /
1866 *Speed 1866 only for 1 slot per channel 1.5V
(Blue color DIMM slot )
Capacity
up to 128GB UDIMM / 512GB RDIMM / 512GB
LRDIMM
Memory channel
4 Channels per CPU / Support 2 R/LR-DIMMs or 2
UDIMMs per channel
Memory
Memory voltage 1.5V or 1.35V
PCI-E
(2) sets of the following expansion combination: (1)
PCI-E x16 slot in-lined with / (1) PCI-E x4 slot
(routed to PCI-E x8 bus) recommended to use
TYAN riser card
Expansion Slots
Recommended
TYAN Riser Card
M7056-L24-3F, PCI-E x16 2U riser card (left) /
M7056-R24-3F, PCI-E x16 2U riser card (right)
Recommended
Barebone /
Chassis
2U Barebone GN70-B7056
Port Q’ty (3) GbE ports
LAN
Controller Intel 82574L / Intel I350BT2
Connector (8) SAS
Controller Intel C602 with TRK-5 upgrade ROM module
Speed 3.0 Gb/s (mini-SAS connector)
SAS
RAID RAID 0/1/10 (Intel Integrated RAID upgrade ROM 5)
Connector (6) SATA
Controller Intel C602
Speed
(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (mini-SAS
connector)
Storage
SATA
RAID RAID 0/1/10/5 (Intel RST)
Connector type D-Sub 15-pin
Resolution Up to 1920x1200
Graphic
Chipset Aspeed AST2300
http://www.tyan.com
20
USB
(7) USB2.0 ports (2 at rear, 4 via cable, 1 type A
onboard)
COM (1) header / (1) port (rear)
SAS (2) Mini-SAS (4-in-1) connectors
VGA (1) D-Sub 15-pin VGA port
RJ-45 (3) GbE ports
Power
SSI 24-pin + 8-pin + 8-pin power connectors / SSI
EEB spec. 2008
Front Panel (1) 2x12-pin SSI front panel header
Input /Output
SATA (1) Mini-SAS connector & (2) SATA-III connectors
Chipset Nuvoton 83773G
Voltage
Monitors voltage for CPU, memory, chipset & power
supply
Fan Total (7) 4-pin headers
Temperature
Monitors temperature for CPU & system
environment
System
Monitoring
Others Watchdog timer support
Onboard Chipset Onboard Aspeed AST2300
AST2300 IPMI
Feature
IPMI 2.0 compliant baseboard management
controller (BMC) / Supports storage over IP and
remote platform-flash / USB 2.0 virtual hub
Server
Management
AST2300 iKVM
Feature
24-bit high quality video compression / 10/100 Mb/s
MAC interface
Brand / ROM size AMI / 8MB
BIOS
Feature
Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3
/
PXE boot / ACPI 2.0 power management /Power on
mode after power recovery / User-configurable H/W
monitoring / Auto-configurable of hard disk types
Form Factor EATX
Physical
Dimension
Board Dimension 12”x13” (305 x33 0mm)
Operating System OS supported list Please visit our Web site for the latest update.
FCC (DoC) Class A
Regulation
CE (DoC) Yes
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
Non-operating
Temp.
- 40° C ~ 70° C (-40° F ~ 158° F)
Operating
Environment
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6
Compliant
Yes
Motherboard (1) S7056 Motherboard
Manual (1) Quick Installation Guide
Installation CD (1) TYAN installation CD
Package
Contains
I/O Shield (1) I/O Shield
http://www.tyan.com
21
Cable SATA
(2) SATA signal cables / (1) Mini-SAS cable to 4 x
SATA cables
http://www.tyan.com
22
TYAN S7056 (S7056WGM3NR-2T-HE)
Supported CPU
Series
Intel Xeon Processor E5-2600/E5-2600 V2 Series
Socket Type / Q’ty LGA2011 / (2)
Thermal Design
Power (TDP)
wattage
Max up to 150W
Processor
System Bus
Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath
Interconnect (QPI) support
Chipset PCH Intel C602 with upgrade ROM module
Supported DIMM
Qty
(8)+(8) DIMM slots
DIMM Type / Speed
UDIMM/RDIMM/LRDIMM ECC 1066 / 1333 / 1600
/ 1866 *Speed 1866 only for 1 slot per channel
1.5V (Blue color DIMM slot )
Capacity
up to 128GB UDIMM / 512GB RDIMM / 512GB
LRDIMM
Memory channel
4 Channels per CPU / Support 2 R/LR-DIMMs or 2
UDIMMs per channel
Memory
Memory voltage 1.5V or 1.35V
PCI-E
(2) sets of the following expansion combination: (1)
PCI-E x16 slot in-lined with / (1) PCI-E x4 slot
(routed to PCI-E x8 bus) recommended to use
TYAN riser card
Expansion Slots
Recommended
TYAN Riser Card
M7056-L24-3F, PCI-E x16 2U riser card (left) /
M7056-R24-3F, PCI-E x16 2U riser card (right)
Recommended
Barebone /
Chassis
2U Barebone GN70-B7056
Port Q’ty (1) GbE port, (2) 10 GbE ports
LAN
Controller Intel 82574L / Intel X540-AT2
Connector (8) SAS
Controller Intel C602 with TRK-5 upgrade ROM module
Speed 3.0 Gb/s (mini-SAS connector)
SAS
RAID
RAID 0/1/10 (Intel Integrated RAID upgrade ROM
5)
Connector (6) SATA
Controller Intel C602
Speed
(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (mini-SAS
connector)
Storage
SATA
RAID RAID 0/1/10/5 (Intel RST)
Connector type D-Sub 15-pin
Graphic
Resolution Up to 1920x1200
http://www.tyan.com
23
Chipset Aspeed AST2300
USB
(7) USB2.0 ports (2 at rear, 4 via cable, 1 type A
onboard)
COM (1) header / (1) port (rear)
SAS (2) Mini-SAS (4-in-1) connectors
VGA (1) D-Sub 15-pin VGA port
RJ-45 (1) GbE port / (2) 10Gbe Ports
Power
SSI 24-pin + 8-pin + 8-pin power connectors / SSI
EEB spec. 2008
Front Panel (1) 2x12-pin SSI front panel header
Input /Output
SATA (1) Mini-SAS connector & (2) SATA-III connectors
Chipset Nuvoton 83773G
Voltage
Monitors voltage for CPU, memory, chipset &
power supply
Fan Total (7) 4-pin headers
Temperature
Monitors temperature for CPU & system
environment
System
Monitoring
Others Watchdog timer support
Onboard Chipset Onboard Aspeed AST2300
AST2300 IPMI
Feature
IPMI 2.0 compliant baseboard management
controller (BMC) / Supports storage over IP and
remote platform-flash / USB 2.0 virtual hub
Server
Management
AST2300 iKVM
Feature
24-bit high quality video compression / 10/100 Mb/s
MAC interface
Brand / ROM size AMI / 8MB
BIOS
Feature
Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3
/PXE boot / ACPI 2.0 power management /Power
on mode after power recovery / User-configurable
H/W monitoring / Auto-configurable of hard disk
types
Form Factor EATX
Physical
Dimension
Board Dimension 12”x13” (305x330mm)
Operating
System
OS supported list Please visit our Web site for the latest update.
FCC (DoC) Class A
Regulation
CE (DoC) Yes
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
Non-operating
Temp.
- 40° C ~ 70° C (-40° F ~ 158° F)
Operating
Environment
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6
Compliant
Yes
http://www.tyan.com
24
Motherboard (1) S7056 Motherboard
Manual (1) Quick Installation Guide
Installation CD (1) TYAN installation CD
I/O Shield (1) I/O Shield
Package
Contains
Cable SATA
(2) SATA signal cables / (1) Mini-SAS cable to 4 x
SATA cables
http://www.tyan.com
25
TYAN S7056 (S7056WGM3NR5-HE [BTO])
Supported CPU
Series
Intel Xeon Processor E5-2600/E5-2600 V2 Series
Socket Type / Q’ty LGA2011 / (2)
Thermal Design
Power (TDP)
wattage
Max up to 150W
Processor
System Bus
Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath
Interconnect (QPI) support
Chipset PCH Intel C602 with upgrade ROM module
Supported DIMM
Qty
(8)+(8) DIMM slots
DIMM Type / Speed
UDIMM/RDIMM/LRDIMM ECC 1066 / 1333 / 1600 /
1866 *Speed 1866 only for 1 slot per channel 1.5V
(Blue color DIMM slot )
Capacity
up to 128GB UDIMM / 512GB RDIMM / 512GB
LRDIMM
Memory channel
4 Channels per CPU / Support 2 R/LR-DIMMs or 2
UDIMMs per channel
Memory
Memory voltage 1.5V or 1.35V
PCI-E
(2) sets of the following expansion combination: (1)
PCI-E x16 slot in-lined with / (1) PCI-E x4 slot
(routed to PCI-E x8 bus) recommended to use
TYAN riser card
Expansion Slots
Recommended
TYAN Riser Card
M7056-L24-3F, PCI-E x16 2U riser card (left) /
M7056-R24-3F, PCI-E x16 2U riser card (right)
Recommended
Barebone /
Chassis
2U Barebone GN70-B7056
Port Q’ty (3) GbE ports
LAN
Controller Intel 82574L / Intel I350BT2
Connector (8) SAS
Controller Intel C602 with TRK-6 upgrade ROM module
Speed 3.0 Gb/s (mini-SAS connector)
SAS
RAID
RAID 0/1/10/5 (Intel Integrated RAID upgrade ROM
6)
Connector (6) SATA
Controller Intel C602
Speed
(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (mini-SAS
connector)
Storage
SATA
RAID RAID 0/1/10/5 (Intel RST)
Connector type D-Sub 15-pin
Resolution Up to 1920x1200
Graphic
Chipset Aspeed AST2300
http://www.tyan.com
26
USB
(7) USB2.0 ports (2 at rear, 4 via cable, 1 type A
onboard)
COM (1) header / (1) port (rear)
SAS (2) Mini-SAS (4-in-1) connectors
VGA (1) D-Sub 15-pin VGA port
RJ-45 (3) GbE ports
Power
SSI 24-pin + 8-pin + 8-pin power connectors / SSI
EEB spec. 2008
Front Panel (1) 2x12-pin SSI front panel header
Input /Output
SATA (1) Mini-SAS connector & (2) SATA-III connectors
Chipset Nuvoton 83773G
Voltage
Monitors voltage for CPU, memory, chipset & power
supply
Fan Total (7) 4-pin headers
Temperature
Monitors temperature for CPU & system
environment
System
Monitoring
Others Watchdog timer support
Onboard Chipset Onboard Aspeed AST2300
AST2300 IPMI
Feature
IPMI 2.0 compliant baseboard management
controller (BMC) / Supports storage over IP and
remote platform-flash / USB 2.0 virtual hub
Server
Management
AST2300 iKVM
Feature
24-bit high quality video compression / 10/100 Mb/s
MAC interface
Brand / ROM size AMI / 8MB
BIOS
Feature
Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3
/
PXE boot / ACPI 2.0 power management /Power on
mode after power recovery / User-configurable H/W
monitoring / Auto-configurable of hard disk types
Form Factor EATX
Physical
Dimension
Board Dimension 12”x13” (305 x33 0mm)
Operating System OS supported list Please visit our Web site for the latest update.
FCC (DoC) Class A
Regulation
CE (DoC) Yes
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
Non-operating
Temp.
- 40° C ~ 70° C (-40° F ~ 158° F)
Operating
Environment
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6
Compliant
Yes
Motherboard (1) S7056 Motherboard
Manual (1) Quick Installation Guide
Installation CD (1) TYAN installation CD
Package
Contains
I/O Shield (1) I/O Shield
http://www.tyan.com
27
Cable SATA
(2) SATA signal cables / (1) Mini-SAS cable to 4 x
SATA cables
1.3 Software Specifications
For the latest OS (operation system) support, please visit the Tyan’s Web site for
information.
http://www.tyan.com
28
NOTE
http://www.tyan.com
29
Chapter 2: Board Installation
You are now ready to install your motherboard.
How to install our products right… the first time
The first thing you should do is read this user’s manual. It contains important
information that will make configuration and setup much easier. Here are some
precautions you should take when installing your motherboard:
(1) Ground yourself properly before removing your motherboard from the
antistatic bag. Unplug the power from your computer power supply and
then touch a safely grounded object to release static charge (i.e. power
supply case). For the safest conditions, MiTAC recommends wearing a
static safety wrist strap.
(2) Hold the motherboard by its edges and do not touch the bottom of the
board, or flex the board in any way.
(3) Avoid touching the motherboard components, IC chips, connectors,
memory modules, and leads.
(4) Place the motherboard on a grounded antistatic surface or on the antist ati c
bag that the board was shipped in.
(5) Inspect the board for damage.
The following pages include details on how to install your motherboard into your
chassis, as well as installing the processor, memory, disk drives and cables.
Caution!
1. To avoid damaging the motherboard and associated
components, do not use torque force greater than
7kgf/cm (6.09 lb/in) on each mounting screw for
motherboard installation.
2. Do not apply power to the board if it has been
damaged.
http://www.tyan.com
30
2.1 Board Image
S7056
This picture is representative of the latest board revision available at the time of
publishing. The board you receive may not look exactly like the above picture.
Loading...