TW Steel CE4002, CE1007, CE1029, CE1036, CE1034 User Manual
...
SWISS made
canteen tonneau
Go LIatH tecH PILot
CEO Canteen
5
CEO Tonneau
CEO Goliath
CEO Tech
CEO Pilot
15
16
10
13
TW STeel – CeO
TW Steel is a watch brand harmoniously combining both design
and innovation. ‘The Watch in Steel’ leads the oversized market
with style and quality guaranteed.
TW Steel values the most important relationship of all – the one
with the consumer. To express this, we hereby give you all the
information that you need to enjoy your TW Steel CEO watch to
the fullest.
CeO CanTeen
The ChrOnOgraph mOdelS
hOur hand
ChrOnOgraph
minuTe hand
ChrOnOgraph
SeCOnd hand
SeCOnd hand
daTe
(0) pOSiTiOn
buTTOn a
minuTe hand
24-hOur hand
CrOWn Cap / nOrmal
CrOWn pOSiTiOn
buTTOn b
5
uSe Of The CrOWn
To adjust the time or set the date,
unscrew the crown cap by turning
it anti-clockwise. Once you have
unscrewed it, you will see the
(small) crown. Follow the instructions below to adjust the time and date. After adjusting them,
screw the crown cap back by turning it clockwise.
adjuSTing The Time
Pull out the crown to the 2nd position so
that the second hand stops at the (0)
position. Turn the crown to set the hour
and minute hands.
adjuSTing The daTe
Pull out the crown to the 1st position. Turn the
crown anti-clockwise to set the date. After the
date has been set, push the crown back to its
normal position.
uSing The ChrOnOgraph
The chronograph is able to measure and display the time accurately to 1/20th of a second, up to a maximum of 59 minutes
and 59 seconds. The retrograde chronograph 1/20 second hand
keeps running continuously for 30 seconds after starting and then
stops at the (0) position. Press button B to change the watch to
6
the chronograph mode. The second hand stops at the (0) position
and changes to the chronograph 1/20 second hand.
The chronograph can be started and stopped at any time by
pressing button A.
Pressing button B resets the chronograph. All hands will then
return to their (0) position. The chronograph second hand can be
restarted by pressing button B once again.
If the chronograph second hand and the chronograph 1/20 second hand do not return to the (0) position after the chronograph
has been reset or after the battery has been replaced, you should
do the following. Pull out the crown to the 2nd position. Press button A to set the chronograph second hand to the (0) position.
Press button B to set the chronograph 1/20 second hand to the
(0) position. The chronograph second hands can be advanced
rapidly by continuously pressing button A or B. Once the hands
have returned to the (0) position, return the crown to its normal
position and screw the crown cap clockwise back to the case.
CAUTION: IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
7
Loading...