Two Brothers Racing VALE Adaptor User Manual

Installation Instructions

V.A.L.E.

VARIABLE AXIS LOCKING EXHAUST

TM

VALE AdAptEr Kit

Part # 005-2-1-V

Parts List

Qty. Description Part Number

1 V.A.L.E. Adapter AL Collar 005-2-1-C

2 V.A.L.E. Adapter SS Spring Hooks 005-2-1-H

1 X-Ring Kit 005-7-2-3KIT

IMPORTANT - PLEASE READ CAREFULLY

We recommend that this performance part be installed by a qualied

technician. If you have any doubts as to your ability to install this performance
part, please consult with your local TrophyKart dealer. Read all instructions

rst before starting installation. Make sure the kart and exhaust system are
completely cool before starting the installation. Also, make sure the kart is
secure during installation. Be sure to save all stock components for possible

use later.

Warranty

Two Brothers Racing products are intended for closed course competition purposes only, and therefore are sold “as is”
without warranty. Two Brothers Racing specifically disclaims any warranties of merchantability or fitness for a particular
purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use
of these products or parts.

1. This kit is a spring hook to V.A.L.E. adapter.

2. You will need to install the aluminum V.A.L.E. ring to

the mufer using the contents of this kit as shown.

3. The X-Lite Ring should be secured with the 4 6x14mm
socket head cap screws and lock washers provided with
the hook clips between X-Ring and V.A.L.E. adapter.

4. The hook clips will be loose until the spring tension

is applied.

5. Slip exhaust tube into V.A.L.E. adapter and attach springs.

Care & Cleaning

Care & Cleaning

Keep system free of dirt and moisture. Store in a cool, dry place. Make sure vehicle is
completely cool before maintenance.

Stainless Header System: Polished stainless steel pipes will turn a light golden hue
after a few heat cycles, this is a normal characteristic of high quality stainless steel.
Clean using a mild water based spray cleaner. Always apply cleaner or polish with a soft,
clean cloth.

Titanium Header System: Polished titanium pipes will experience color shift ranging
from deep blue/purple through amber after a few heat cycles. This is a normal
characteristic of high quality titanium. Clean using a mild water based spray cleaner.
Always apply cleaner or polish with a soft, clean cloth.

Polished Aluminum Canisters: Use an aluminum or mag wheel polish to restore the

bright nish to factory spec.

Brushed Aluminum Canisters: Clean using a mild water based spray cleaner. Always
apply cleaner or polish with a soft, clean cloth.

Carbon Fiber Canisters: Clean using a mild water based spray cleaner. Always apply

cleaner or polish with a soft, clean cloth. Always make sure the berglass packing inside

is in good condition and not burned out, as exhaust heat inside an empty canister will
deteriorate the carbon ber sleeve.
TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include
everything you need to easily do it yourself.

Titanium Mufers: For cleaning use a mild water based spray cleaner. Always apply

cleaner or polish with a soft, clean cloth. Always make sure the berglass packing inside

is in good condition and not burned out, as exhaust heat inside an empty canister will

deteriorate the carbon ber sleeve.

TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include
everything you need to easily do it yourself.

Repack all road canisters at the rst signs of packing material deterioration. Part #005-10038

Repack all offroad canisters after every 10 hours of use. Part #005-10038MX

NEVER dyno test your bike with carbon ber or titanium canisters installed - the

intense heat and lack of cooling air can quickly burn through the canister material. Two
Brothers Racing does not provide a warranty for burned canisters.