Page 1
Yamaha
TT-R110
Co mp le te Exha us t Sy ste m wi th M-6 C an is te r
Par t # 00 5- 19 7010 4M
Parts List
Qty. Description Part Number
1 Header 005-19701H
1 Muffler 005-197204M
1 Spark Arrestor (installed) 005-107-S
1 Spark Arrestor Spacer (installed) 005-107-S1
1 HARDWARE KIT 005-197-3
1 Permatex Ultra Black Gasket Maker 031-P22072
2 Two Brothers Racing Stickers 015-10208-A
Installation Instructions
Make sure the bike is completely cool before starting the
1.
installation. Make sure the bike is secure on the sidestand
or ideally a rear service stand.
Remove the right, rear number plate panel.
2.
Remove the stock exhaust system.
3.
Install the TBR header.
4.
Place a bead of the hi-temp sealant on the outside edge
5.
of the header that goes into the canister. Slide the TBR
canister onto the end of the header. Wipe off the excess
sealant that will squeeze out.
Use the OEM bolt to secure muffler assembly to subframe.
6.
Make sure everything is aligned and tighten all hardware.
7.
Before you run the bike, clean off all fingerprints and
8.
dirt, as any oily residue will etch the metal and become
somewhat permanent when the system gets hot. Run
the bike and enjoy. It is normal for some white smoke to
appear the first time you start the bike. This is packing/
manufacturing oil from inside the pipe burning off.
Check for gaps or leaks. If you find a leak, a little high
temperature silicon sealant should fix it. After your first ride,
recheck all fasteners for tightness.
IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualied
motorcycle technician. If you have any doubts as to your ability to install this
performance part, please consult with your local motorcycle dealer. Read all
instructions rst before starting installation. Make sure the motorcycle and
exhaust system are completely cool before starting the installation. Also,
make sure the bike is secure on a centerstand or ideally a service lift during
installation. Be sure to save all stock components for possible use later.
Warranty
Two Brothe rs Racing p roducts are intended fo r closed co urse compet ition purpo ses only, and therefore are sold “a s is”
without warranty. Two B rothers Rac ing specifi cally discla ims any war ranties of merchantabi lity or fit ness for a particular
purpose and discla ims all res ponsibility for conseq uential and incidental damages or any other losses aris ing from the use
of thes e products or parts.
Loading...