Two Brothers Racing Street Triple User Manual
V.A.L.E.
2008-09 Triumph
V A R I A B L E A X I S L O C K I N G E X H A U S T
Street triple
V.A.L .E .™ Dua l Sl ip -o n Ex ha us t Sy ste m wi th M -2 C an ister s
Par t # 00 5- 24 80 40 6DV, 00 5- 24 80 40 7DV, 0 05-2 48 04 08 DV
Parts List
Qty. Description Part Number
2 Muffler Canister Varies
2 Muffler Clamp Varies
1 Slip-on Tube left 005-24804L
1 Slip-on Tube right 005-24804R
1 HARDWARE KIT 005-248-3
2 X-Ring 005-7-2-2
8 6x14mm Socket Head Cap Screw 005-SH614
8 6mm Split Lock Washer 005-WL6
1 Mounting Bracket left 005-248HB-L
1 Mounting Bracket right 005-248HB-R
2 8x20mm Flange Bolt 005-FB816
2 8mm Flange Nut 005-FN8
1 T20 Torx Screw Hex Key 005-9-15820
1 5mm Long Handle Ball End Hex Wrench 005-9-18610
1 TBR Sticker Kit 015-10212
Installation Instructions
Play with rotation of slip-on tube to align mufflers and
Make sure the bike is completely cool before starting the
1.
installation. Make sure the bike is secure on a centerstand
or ideally a service lift.
Remove seat.
2.
Remove left and right rear tail section.
3.
TM
8.
tighten muffler clamps, X-Ring bolts and OEM joint
clamps at header assembly.
Make sure you have adequate clearance of all parts and
9.
exhaust is coming out above turn signals.
Re-install removed parts.
10.
Remove left and right mufflers.
4.
Install left and right hanger brackets.
5.
Double check all your work.
11.
Before you run the bike, clean off all fingerprints and
12.
dirt, as any oily residue will etch the metal and become
somewhat permanent when the system gets hot. Also,
remove any plastic film from the name badge(s) and or
canister clamp(s). Run the bike and enjoy. It is normal for
some white smoke to appear the first time you start the
bike. This is packing/manufacturing oil from inside the
pipe burning off. Check for gaps or leaks. If you find a leak,
a little high temperature silicon sealant should fix it. After
50 to 100 miles, recheck all fasteners for tightness.
Install TBR slip-on tubes to mufflers by loosely attaching
6.
the X-Ring to the mufflers using the 6x14mm socket head
cap screws and lock washers provided. Leave loose for
now.
Attach mufflers to motorcycle using the rubber lines
7.
muffler clamps and flange bolts provided. Leave loose
for now.
IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualied motorcycle
technician. If you have any doubts as to your ability to install this performance
part, please consult with your local motorcycle dealer. Read all instructions rst
before starting installation. Make sure the motorcycle and exhaust system are
completely cool before starting the installation. Also, make sure the bike is secure
on a centerstand or ideally a service lift during installation. Be sure to save all stock
components for possible use later.
Continued on pg. 2
2008-09 Triumph
Street triple
V.A.L .E .™ Dua l Sl ip -o n Ex ha us t Sy ste m wi th M -2 C an ister s
Par t # 00 5- 24 80 40 6DV, 00 5- 24 80 40 7DV, 0 05-2 48 04 08 DV
Warranty
Two Brothe rs Racing p roducts are intended fo r closed co urse compet ition purpo ses only,
and the refore are sold “as is ” without w arranty. Two Brot hers Racing specifical ly disclaim s
any war ranties of merchantabi lity or fit ness for a particular purpose and disclaims all
respons ibility for consequent ial and inc idental dam ages or any other loss es arising from
the use of these p roducts or parts.
Care & Cleaning
Care & Cleaning
Keep system free of dirt and moisture. Store in a cool, dry place. Make sure vehicle is
completely cool before maintenance.
Stainless Header System:
after a few heat cycles, this is a normal characteristic of high quality stainless steel.
Clean using a mild water based spray cleaner. Always apply cleaner or polish with a soft,
clean cloth.
Titanium Header System:
from deep blue/purple through amber after a few heat cycles. This is a normal
characteristic of high quality titanium. Clean using a mild water based spray cleaner.
Always apply cleaner or polish with a soft, clean cloth.
Polished Aluminum Canisters:
bright finish to factory spec.
Brushed Aluminum Canisters:
apply cleaner or polish with a soft, clean cloth.
Carbon Fiber Canisters:
cleaner or polish with a soft, clean cloth. Always make sure the fiberglass packing inside
is in good condition and not burned out, as exhaust heat inside an empty canister will
deteriorate the carbon fiber sleeve.
TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include
everything you need to easily do it yourself.
Titanium Mufflers:
cleaner or polish with a soft, clean cloth. Always make sure the fiberglass packing inside
is in good condition and not burned out, as exhaust heat inside an empty canister will
deteriorate the carbon fiber sleeve.
TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include
everything you need to easily do it yourself.
Repack all road canisters at the first signs of packing material deterioration. Part #005-10038
Repack all offroad canisters after every 10 hours of use. Part #005-10038MX
NEVER dyno test your bike with carbon fiber or titanium canisters installed - the
intense heat and lack of cooling air can quickly burn through the canister material. Two
Brothers Racing does not provide a warranty for burned canisters.
Polished stainless steel pipes will turn a light golden hue
Polished titanium pipes will experience color shift ranging
Use an aluminum or mag wheel polish to restore the
Clean using a mild water based spray cleaner. Always
Clean using a mild water based spray cleaner. Always apply
For cleaning use a mild water based spray cleaner. Always apply
005-2480406DV
Qty. Description Part Number
1 Muffler Canister Left 005-248-206L
1 Muffler Canister Right 005-248-206R
2 Muffler Clamp 005-2C
1 Slip-on Tube left 005-24804L
1 Slip-on Tube right 005-24804R
1 HARDWARE KIT 005-248-3
2 X-Ring 005-7-2-2
8 6x14mm Socket Head Cap Screw 005-SH614
8 6mm Split Lock Washer 005-WL6
1 Mounting Bracket left 005-248HB-L
1 Mounting Bracket right 005-248HB-R
2 8x20mm Flange Bolt 005-FB816
2 8mm Flange Nut 005-FN8
1 T20 Torx Screw Hex Key 005-9-15820
1 5mm Long Handle Ball End Hex Wrench 005-9-18610
1 TBR Sticker Kit 015-10212
Qty. Description Part Number
1 Muffler Canister Left 005-248-207L
1 Muffler Canister Right 005-248-207R
2 Muffler Clamp 005-2C1
1 Slip-on Tube left 005-24804L
1 Slip-on Tube right 005-24804R
1 HARDWARE KIT 005-248-3
2 X-Ring 005-7-2-2
8 6x14mm Socket Head Cap Screw 005-SH614
8 6mm Split Lock Washer 005-WL6
1 Mounting Bracket left 005-248HB-L
1 Mounting Bracket right 005-248HB-R
2 8x20mm Flange Bolt 005-FB816
2 8mm Flange Nut 005-FN8
1 T20 Torx Screw Hex Key 005-9-15820
1 5mm Long Handle Ball End Hex Wrench 005-9-18610
1 TBR Sticker Kit 015-10212
005-2480408DV005-2480407DV
Qty. Description Part Number
1 Muffler Canister Left 005-248-208L
1 Muffler Canister Right 005-248-208R
2 Muffler Clamp 005-2C2
1 Slip-on Tube left 005-24804L
1 Slip-on Tube right 005-24804R
1 HARDWARE KIT 005-248-3
2 X-Ring 005-7-2-2
8 6x14mm Socket Head Cap Screw 005-SH614
8 6mm Split Lock Washer 005-WL6
1 Mounting Bracket left 005-248HB-L
1 Mounting Bracket right 005-248HB-R
2 8x20mm Flange Bolt 005-FB816
2 8mm Flange Nut 005-FN8
1 T20 Torx Screw Hex Key 005-9-15820
1 5mm Long Handle Ball End Hex Wrench 005-9-18610
1 TBR Sticker Kit 015-10212
Loading...