INSTRUCTION MANUAL
It is designed for maximum performance. Please see k advic e if one is n ot familiar with this kind
of electric powered precision model. Operating this model with out pri or prep arati on may cause
injuries. Remember, safety is the most important th ing. Alw ays kee p this in struction manual at
hand for quick reference.
Warning ! This model is not a toy.
*Specifications are subject to change wi thout notice.*
Wing Span
41 in / 1040 mm
Wing Area
Flying Weight
Fuselage Length
26 oz / 740 g
264 sq in / 17 sq dm
30 in / 760 mm
Specifications
Requires: 4-channel radio w/ 4 micro servos,
w/ Propeller Adaptor HW2340100,
20A Brushless ESC , 3 cells 11. 1V
2100 mAh Li- Po battery & charger.
Outrunner Motor KM0283010
A
E
D
R
-
Y
T
-
T
S
O
O
-
F
M
L
L
Y
A
FACTORY PRE-FABRICATED
ALMOST-READY-TO-FLY (ARF) SERIES
MADE IN CHINA
E261X MPO19650902
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
1
2
3
P.1
P. 3 -9
IND EX
BEFORE YOU BEGIN
PARTS LIST
ASSEMBLY
SAFETY PRECAUTIONS
P. 1
P. 2
P.9
BEFORE YOU BEGIN
3mm
Do not overlook this symbol!
Cut off shaded portion.
Peel off shaded portion
covering film.
Pay close attention here!
Pierce the shaded portion
covering film.
Must be purchased separately!
Drill holes with the specified
diameter (here: 3mm).
Ensure smooth non-binding
movement while assembling.
Apply instant glue
(C.A. glue, super glue.)
Assemble left and right
sides the same way.
Apply epoxy glue.
Apply thread locker
Warning!
E261X MPO19650902
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
Parts List
P.2
1. MAI N WI NG 1 pc.
2. SCR EW P B2x14 mm - - 4 pcs
SERVO MO UN TING PANEL -- 1 pa ir
PUSH RO D Ø1.4x 56 mm w/ Threa ds ( For Aile ro n) -- 2 pcs
STRA PE R -- 2 pcs
FUEL TU BE d 2xD4x 4m m -- 4 pcs
CLEV IS - - 2 pcs
HORN - - 2 se ts
SCRE W PA1 .7 x8mm -- 8 p cs
3. STABIL IZ ER & ELEVATO R -- 1 s et
FUSE LA GE -- 1 pc.
4. VERTI CA L FIN & RU DD ER -- 1 set
5. PUS HR OD Ø1.4 x3 16mm w/ Thr ea ds (For E le vator ) -- 2 p cs
SCRE W PB 2x8mm - - 4 pc s
CLEV IS - - 2 pcs
FUEL TU BE d 2xD4x 4m m -- 2 pcs
HORN - - 2 se ts
6. PUS HR OD Ø1.4 x3 78mm w/ Thr ea ds (For Ru dd er) -- 1 pc .
SCRE W PB 2x8mm - - 2 pc s
CLEV IS - - 1 pc.
FUEL TU BE d 2xD4x 4m m -- 1 pc.
HORN - - 1 se t
7. FRO NT L AN DING GE AR - - 1 set
SCRE W PWA2.3 x8 mm -- 4 pcs
SCRE W PA2 x6 mm -- 2 pcs
COLL AR Ø 2.6mm w / Se t Screw - - 1 se t
LAND IN G WIRE ST RA PS (PL4 114 03 0) -- 2 pcs
WHEE L PANT S -- 1 pc.
MOUN TI NG PLATE (PL 41140 15) -- 1 pc .
PLAS TI C COLLA R d3 .5xD8 x3 mm -- 1 pc.
FRON T WH EE L Ø40m m -- 1 p c.
8. S CREW PM 3x 6mm -- 4 pc s
WAS HE R d3xD7 mm - - 4 pcs
FOLD IN G PROPE LL ER SET PL63 14 020 -- 1 se t
--
SCRE W PM 2x12m m -- 2 p cs
SPIN NE R Ø36mm - - 1 pc .
COWL IN G -- 1 pc.
SCRE W PWA2x8 mm - - 4 pcs
9. SCR EW P WA2x 8m m -- 4 pcs
WIND S HI ELD & SID E WI NDOWS 1 se t
10. SC RE W PM2x1 0m m -- 1 pc.
BALS A 1.5 x55x6 0m m -- 1 pc.
M2 NYL ON I NSERT LO CK NUT -- 1 p c.
MOUN TI NG PLATE (Pl 41140 15) -- 1 pc .
WAS HE R d2xD5 mm - - 1 pc.
DOUB LE -SIDE D TAPE 30x3 5mm -- 1 pc .
PUSH RO D Ø1.4x 50 mm -- 1 pc.
BATTERY TI E -- 1 p c.
SPON GE 1 0x50x 15 0mm -- 1 pc .
STRA PE R -- 2 pcs
FUEL TU BE d 2xD4x 4m m -- 2 pcs
PUSH RO D CONNE CT OR 3 .2x7. 2x 16mm -- 1 s et
11. MAIN LA ND ING GEA R -- 1 s et
SCRE W PWA2.3 x1 2mm -- 6 pc s
SCRE W PA2 x6 mm -- 4 pcs
WHEE L PANT S -- 1 pair
MAIN W HE EL Ø40 mm - - 2 pcs
LAND IN G WIRE ST RA PS (PL4 114 03 0) -- 3 pcs
MOUN TI NG PLATE (PL 41140 15) -- 2 pc s
COLL AR Ø 2.6mm w/ S et S crew -- 2 p cs
PLAS TI C COLLA R d3 .5xD8 x3 mm -- 2 pcs
12. PL AS TIC PLATE 0. 8x 10x90 mm - - 1 pc.
NYLO N BO LT M2 . 5x20m m -- 2 p cs
NYLO N WASHER D 2. 6xD9 mm - - 2 pcs
13. SC RE W PWA2 x8 mm -- 4 pcs
MAIN W IN G STRUT - - 1 pa ir
14. DE CA LS: E26 1X MDEC -- 1 s et
E261X MPO19650902
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
Main Wing
1
P.3
2
4
PB2x1 4mm Screw
Apply instant type CA glue to both sides of each hinge.
Botto m View
Ailer on Servo Le ad
02L
03L
04L
02R
03R
04R
PA1.7x8mm Screw
8
2mm
Ø1mm pilot holes for World Models control horn are pre-drilled.
Please look for pin-hole marks at under side of control surfaces.
d2xD4x4mm
Fuel Tube
PB2x 14mm
Clevis
Push rod
Ø1.4 x5 6mm
Horn
Please choose either 02L &
02R or 03L & 03R or 04L &
04R that suits your servo.
Botto m View
PA1. 7X8mm
Stra pe r
Fuel Tube
d2xD4x4mm
Push rod
Ø1.4 x5 6mm
TWM PL82 10 010
CLEVI S WRE NCH
E261X MPO19650902
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
90mm
11mm
Stabilizer & Elevator
3
4
Apply instant type CA glue to both sides of each hinge.
A=A
A
A
P.4
Comp le ted
(Stabil iz er )
(Main Win g)
B B'
B=B'
Elevator Pushrod
5
PB2 x 8mm Screw
Ø1mm pilot holes for World Models control horn are pre-drilled.
Please look for pin-hole marks at under side of control surfaces.
4
Botto m View
Comp le ted
Fuel Tu be
d2xD 4x4mm
Clev is
PB2x8 mm
2mm
Horn
Ø1.4 x31 6mm
Pushrod
C=C'
C
C
Apply instant type CA glue to both sides of each hinge.
TWM PL8 21 00 10
CLEVIS WR EN CH
E261X MPO19650902
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
44mm
35mm
P.5
2
PA2.6x8mm Screw
Rudder Pushrod
6
2
PB2 x 8m m Scr ew
Ø1mm pilot holes for World Models control horn are pre-drilled. Please
look for pin-hole marks at side of control surfaces.
Front Landing Gear
7
PA2x6mm
PWA2 .3 x8mm
LANDING WIRE STRAPS
Bottom View
1.5mm
Plastic
3mm
Collar
Set Screw
Wheel 40mm
2.6mm Collar
PA2x 6m m
Mounting Plate
2
PA2x6mm Screw
4
PWA2 .3x 8mm S crew
2.6mm Col lar
1
PB2x8m m
Clevis
Fuel Tub e
d2xD4x 4m m
8
Push ro d
Ø1.4x3 78 mm
Plast ic Collar
1
PM2x1 2mm Screw
2
PWA2x8mm Screw
4
PM3x6 mm Screw
4
d3xD7 mm Washer
4
Don't over-tighten the PM2
screws,let the propeller blades
align themselves when spinning.
PM2x12mm
PM2x12mm
PWA2x 8mm
PA2. 6x 8m m
Spinner
36mmØ
1.5m m
M5 Nut
TWM H W3111400
PRO PELLE R ADAPT OR WREN CH
Don't ove r-t ighten the PM3 sc rew, too
much stre ss on t he screws could s pli t
the fi rew all .
Make sure r ota ting motor casi ng is n ot
in con tac t wit h wirings or anyt hin g.
Fibr eg lass C owlin g
2mm
Sold er
Sold er
TWM
KP011 31 0
PM3x 6m m
Was he r
d3xD7mm
20A B rushl ess ESC
TWM K C202S A02A
Optiona l Pa rt s
Out runne r Motor 2 8/30
KM2 83010
Pro pelle r Adapt or
(d 3xD5)
HW2 34010 0
TWM PL8 21 00 10
CLEVIS WR EN CH
E261X MPO19650902
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
P.6
Canopy
PWA2x8m m Screw
4
9
Radio Equipment
10
PWA2x8mm
Receiver wrapped up in sponge.
Install and arrange the servos as shown in the diagram.
Elevator Pushrod
Ø 501.4x mm
KA1.7x6mm
Sponge
PWA2x8mm
Rudder Servo
Elevator Servo
Rudder Pushrod
Ø x3781.4 mm
Fuel Tube
d2xD4x4mm
Straper
PM2x1 0mm Screw
1
d2xD5 mm Washer
1
M2 Nylon Insert Lock Nut
1
Battery
Battery
Battery Tie
Wa sh er
d2 xD 5m m
PM2x10mm
M2 Nylon
Insert Lock Nut
Mount in g Pl at e
B alsa
1.5 x5 5x 60mm
Bottom View
Doubl e Sided-Tape
20A Br us hless
ESC
Bottom View
Elevator Ser vo
Pushrod Co nn ec to r
2mm
1.5mm
1.5mm
J1
J2
J2(Pushrod Ø1.8x730)
J1(Pushrod Ø1.8x130)
E261X MPO19650902
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
P.7
Wing Struts
13
4
PWA2x8m m Screw
Main Landing Gear
PWA2.3x 12mm Screw
2.6mm Collar
Plastic Collar
2
2
6
11
PWA2x8m m
M2.5x 20mm
Nylon B lot
d2.6x D9mm
Nylon Was her
Plast ic Plate
0.8x1 0x90mm
Main Wing
12
PWA 2.3x1 2mm
1.5mm
LANDING WIRE STRAPS
Front
Bottom View
Bottom View
PA2x6 mm Screw
4
Front
Front
Plas tic
3mm
Coll ar
Set Sc rew
Whee l 40mmØ
2.6m m Co llar
PA2x6mm
Moun tin g Plate
2
2
M2.5x20mm Nylon Bolt
d2.6xD9mm Nylon Washer
2.5mm
1mm
1.5mm
E261X MPO19650902
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
A
A'
P.8
Wing Setting
14
A = A ' B = B '
C =C '
B B'
C C'
Adjust the wing and fuselage configuration as shown in the diagrams.
E261X MPO19650902
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
Adjust the con trol throws as shown in the
diagram. The se throws are good for gene ral
flying. You can adj ust according to your
personal pre ference.
Elevator
Important Safety Precautions
# First time flyer should never fly by himself/ herself. Assistance from experienced flyer is
absolutely necessary.
# Pre-flight adjustment must be done before flying, it is very dangerous to fly a badly pre-adjusted
aircraft.
# is specially designed to be powered by KM0283010 Outrunner Motor.
#
# If you find wrinkles on the covering as a result of weather changes, you can use hot iron to remove
the wrinkles. Please begin with lower temperature setting and gradually raise the temperature
until the wrinkles are gone. Too hot an iron may damage the covering. Don't use hot iron near the
seams or edges, hot iron will melt the glue and shrink the covering at the same time, causing the
seams to pull away.
# Check and re-tighten up all factory assembled screws, use thread locker if necessary.
Make sure the air field is spacious, never fly the plane too close to people and never get too close
to a running propeller. Extreme caution should be exercised when working with electric powered
models. Make sure the propeller is cleared of all objects, especially your hands before connecting
the battery to the model. Make sure you understand the operation of the ESC (Electronic Speed
Control) by studying the ESC manual. Once you plug in the battery for electric powered model,
always treat the propeller as a rotating one, as accidental movement of the throttle stick will spin
the propeller and could cause injuries.
Warning!
Rudder
20mm
20mm
10mm
10mm
15
Aileron
8mm
8mm
C.G.
16
The ideal C.G. position is 51mm ( 2 in.) behind
the leading edge measured at where the w ing
meets the fuselage. In order to obtain the C.G.
specified, add weight to the fuselage or move
the battery position. Check the C.G. before
flying.
51mm
C.G.
2 in.
P.9
E261X MPO19650902
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model, including
product news and free upgrade parts when applicable. Please fill in the following and send to
Air Borne Models, 2403, Research Drive, Livermore, CA 94550.U.S.A .
1.Name:
2.Address:
3.Phone #: e-mail:
4.Model:
Wing QC# Fuselage QC#
(QC numbers are stamped on wing and fuselage)
5.Date of Purchase:
6.Store Name:
Please call AirBorne Models at 925 371 0922 for any assistance in filling this form.
Thank you very much for purchasing our product.
E261X MPO19650902
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
Large Cle vis
Small Cle vis
Pl821 0010
E261X MPO19650902
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
E261X MPO19650902
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
E261X MPO19650902
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
E261X MPO19650902
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
E261X MPO19650902
The World Models
Manufacturing Co., LTD.
www.theworl d m o d e l s . c o m
Warbirds
Scale
Sports
Trainer
Ducted Fan
Pattern
Funfly
Electric
Glider
Boat
Accessories
Covering
(Lightex / Toughlon)
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
Loading...