Twisty Ride MOTORCYCLE & SCOOTER IPHONE 5 CHARGER User Manual
www.twistyride.com
MOTORCYCLE & SCOOTER
IPHONE 5 CHARGER
www.twistyride.com 2
CONTENTS
Introduction .......................................................................... 3
What’s in the Box?............................................................... 4
Fitting the iPhone Charger ................................................... 5
Caution ............................................................................ 5
Charger Cable ................................................................. 5
Fitting Instructions ............................................................ 6
Safety Notices and Warnings .............................................. 8
Safety ............................................................................... 8
Maintenance and Security ............................................... 8
Technical Specifications ...................................................... 9
Warranty and Support ....................................................... 10
Warranty Cover .............................................................. 10
Exclusions from Warranty .............................................. 10
Your Legal Rights .......................................................... 11
Limitation of Liability ....................................................... 12
CE Marking .................................................................... 13
Copyright Notice ................................................................ 14
www.twistyride.com 3
INTRODUCTION
Congratulations on your purchase and welcome to Twisty
Ride! This iPhone charger has been designed by Twisty
Ride to fit most motorcycles and scooter in order to keep
your mobile charged when riding.
This document provides details over the Motorcycle iPhone
Charger only. The other components of the Twisty Ride
iPhone case system are not discussed in this user guide. If
you have purchased other items such as the case or the
mount please refer to their associated documentations.
Visit us at www.twistyride.com to access our FREE
motorcycle journey planner as well as a range of expert tips
and specialised gear.
www.twistyride.com 4
WH AT’S IN THE BOX?
The following items are included with the motorcycle iPhone
charger:
- 6 mm battery ring clips
- 2 amp standard automotive blade fuse in its
waterproof lodging
- An on / off switch
- A power converter with LED operating indicator
- A waterproof “quick release” connector
- An iPhone connector with waterproof cap
- 4 zip ties
www.twistyride.com 5
FITTING THE IPHONE CHARGER
CAUTION
Extreme care must be taken when mounting the iPhone
charger on a motorcycle or scooter. Read this document
carefully before fitting the charger. The charger shall be
mounted in compliance with the relevant legislation and the
vehicle manufacturer's rules. Failure to mount the charger
correctly could result in damage to your vehicle and serious
injury to the vehicle rider and other road users. The iPhone
charger is fitted on your motorcycle or scooter at your own
risk. In doubt, always refer to a qualified professional.
CHARGER CABLE
The power cable shall be routed to avoid sharp bends,
abrasion, overheating, exhaust gases and battery acids and
other potential hazards. It must not be strained nor distorted
by e.g. excessive tightening of cable ties. Ensure that all
connections are mechanically and electrically safe and
secure. Keep away from heat sources and vehicle controls.
It must not hinder the operation of safety equipment nor
interfere with the driver’s ability to control the vehicle.
The charger has a total cable length of 3200 mm to the
quick release connector. It is long enough to accommodate
most types of motorcycles or scooters and be hidden within
the fairing. Excess length should be dealt with by rolling the
Loading...