Twister T6 Operation Manual
Version 1.0
TABLE OF CONTENTS
Important Safety Information
Component Overview
Initial Assembly
T6-Leaf Collector Parts List and Assembly
Setup and Operation
Leg Leveler
Bed Knife Clicker Controls
Bed Knife Adjustment
Tandem Setup
Tandem Leg Leveler
Tandem Disassembly
Maintenance
1
2
2
4
5
5
6
6
7
9
9
9
Inspection
Cleaning
Disassembly Instructions
Reassembly Instructions
Troubleshooting
Warranty
Electrical Specifications
Replacement Parts
10
10
11
13
16
17
18
19
www.twistertrimmer.com
IMPORTANT SAFETY INFORMATION
This document refers to the Twister T6 leaf trimming machine as the T6.
The T6 is a high-speed cutting unit that requires special safety precautions
to be practiced while in operation to reduce the risk of personal injury.
Improper use of the T6 may cause serious or fatal injury. Please read the
precautions and warning labels before using the T6.
Do not lend out or rent your T6 without this operating manual. A first time
operator should obtain proper instruction before using this machine.
SAFETY PRECAUTION
Operating th e T 6 w ithout reading the instruct i o n s t hat accompany a cautiona r y l a b el
i.e.: a “Dan g e r ” , “Caution”, “Warning” or “Notice” symbol, m a y r esult in serious or
fatal injury.
Gene ral
ĺ
Do not expose the T6 control box to water. Always remove before cleaning.
ĺ
Do not move, disassemble, clean or inspect the T6 while the power is connected to the machine.
ĺ
Replacement parts are specific to the T6 and must be purchased from an authorized dealer only.
Substituting factory parts with third-party parts may result in bodily harm or damage to the T6.
ĺ
If used, do not allow lubricants or mineral oils to collect on the ground. This could cause a slipping
hazard for the operator and others working in the area.
ĺ
Keep everyone a safe distance from your work area. Never operate the T6 around children.
ĺ
Do not remove safety labels. Replace any and all safety labels if they become damaged or obscured.
Conn ecti on
ĺ
Like any home appliance, the T6 must be used in connection with a properly grounded receptacle.
ĺ
Never plug in or power up the T6 with protective shrouds removed.
ĺ
Do not use extension cords over 15m (50ft) in length to power up your T6.
Oper atio n
ĺ
The T6 comes from the manufacturer set with the optimal blade contact. The initial set up will show
assembly instructions to put the chute and hopper on.
ĺ
Safety glasses must be worn at all times when operating the T6.
ĺ
Do not operate the T6 while tired or under the influence of drugs, alcohol or medication.
ĺ
Do not put objects in the tumbler that cannot be properly processed by the T6. Doing so may cause
bodily harm or damage to property.
ĺ
Operate the T6 in a well ventilated area to prevent overheating.
Main tena nce
ĺ
Never let the T6 run unattended.
ĺ
Never conduct maintenance while the T6 is plugged in.
ĺ
Ensure the T6 is powered off and the machine is unplugged before cleaning.
ĺ
Do not change or modify any part of the T6 or its accessories. Doing so may cause bodily harm or
damage to property.
www.twistertrimmer.com
Plant matter only.
1
COMPONENT OVERVIEW
HOPPER
LEG ADJUSTER
TANDEM PLATE
ADJUSTABLE LEGS
LID LATCHES
REEL BLADE
CHUTE
HANDLE
CONTROL BOX
CONTROL BOX CAM
VACUUM INLET
LID
TUMBLER
BED KNIFE CLICKERS
BELT COVER
INITIAL ASSEMBLY
REMOVE LID AND TUMBLER
1
NEVER PLUG IN MACHINE
1
WITH LID REMOVED
BED KNIFE
TANDEM SLIDER
32
2
www.twistertrimmer.com
INSTALL CHUTE THEN REINSTALL TUMBLER
2
INSTALL HOPPER
3
REINSTALL LID
4
www.twistertrimmer.com
3
T6-LEAF COLLECTOR (T6-LC) PARTS LIST
H
E
D
PART NO DESCRIPTION QTY REF
A
B
C
D
E
F
G
H
23-02-002101 4” HOSE CUFF
23-02-002102 4” HOSE X 8.25’, PVC
23-02-002103 5” BAG CLAMP, QUICK CONNECT
23-02-002104 BLACK FILTER BAG, 5” MOUNT, 200-400 MICRON
23-02-002105 WHITE FILTER BAG, 5” MOUNT, 70 MICRON
23-02-002106 VACUUM BASEPLATE
23-02-002107 CASTER
23-02-002108 1 HP VACUUM MOTOR
F
G
A
TOOLS NEEDED FASTENERS
B
C
2
1
1
1
1
1
4
1
A B
REF
A
B
DESCRIPTION
7/16” OR 10 MM WRENCH
1/2” OR 12 MM WRENCH
T6-LC ASSEMBLY
1
x4
5/16 FLAT WASHER
5/16-18
ACORN NUT
4
www.twistertrimmer.com
2
1/4-20 X 3/4
HEX HEAD SCREW
REF
A
B
C
x4
A
DESCRIPTION
1/4-20 X 3/4” HEX HEAD SCREW
5/16” FLAT WASHER
5/16” ACORN NUT
x4
B
x4
C
3
SETUP AND OPERATION
APPLY DISH SOAP OR ISOPROPYL ALCOHOL TO THE
1
INSIDE OF THE HOSE CUFF TO HELP TWIST IT ON.
2
LEG LEVELER
1
INSTALL BLACK BAG FIRST
3
3
4
POWER OFF
POWER ON/RESET
2
www.twistertrimmer.com
HIGHER LEG HEIGHT MEANS
FASTER THROUGHPUT
5
Loading...