Twister MicroTwister Ninja Instruction Manual

Please read the instructions carefully before use and retain for future reference.
The world’s most durable carbon fibre radio controlled helicopter
INSTRUCTION MANUAL
Virtually no screws for ultra fast maintenance Carbon lightweight construction for ultra durability Flexible super strong wide track undercarriage Lipo cutout to prevent over discharging of battery in flight High strength, flexible main rotor blades Comfortable, compact infrared remote control transmitter 360° directional control, (forward/back/left/right/up/down) Super smooth and stable hovering 30 minute charge time direct from the transmitter Approximately 10 minutes flying time per charge
2
SpeCIfICATIONS
Fuselage length ���������������������������������������������������������������������������������������� 180mm Main rotor diameter��������������������������������������������������������������������������������� 175mm Weight ���������������������������������������������������������������������������������������������������������������19g Operational range �������������������������������������������������������������������� about 10 meters Charging time����������������������������������������������������������������������� approx� 30 minutes Flying time ����������������������������������������������������������������������������������over 10 minutes On board power�����������������������������������������������������������������������3�7V LiPo battery
Required
Transmitter batteries ������������������������������������������������������� 6 x 1�5V AA batteries
GUARANTee/WARRANTY
Crash damage is not covered by warranty.
J� Perkins Distribution Ltd� guarantee this product to be free of manufacturing and assembly defects for a period of one year from time of purchase� This does not affect your statutory rights� This warranty is not valid for any damage or subsequent damage arising as a result of a crash, misuse, modification or for damage or consequential damage arising as a result of failure to observe the procedures outlined in this manual� Operation of this model is carried out entirely at the risk of the operator� Please note that, whilst every effort is made to ensure the accuracy of instructions and material included with this product, mistakes can occur and J� Perkins Distribution Ltd nor it’s distributors will be held liable for any loss or damage arising from the use of this model or for any loss or damage arising from omissions or inaccuracies in the associated instructions or materials included with this product� We reserve the right to modify the design of this product, contents and manuals without prior notification� © 2011 J Perkins Distribution Ltd, Lenham, Kent, UK ME17 2DL� www�jperkinsdistribution�co�uk All rights reserved� E&OE�
SAfeTY pReCAUTIONS
Please read all instructions carefully before using this model.
If any information in this manual is unclear, please contact your retail supplier for help�
DANGER-This product is for indoor use only� DANGER-Do not use in direct sunlight or strong lighting as it may effect the infra red control system�
Please note especially the potential dangers associated with the rotating parts in this model:
DANGER-Wear protective eye wear when operating model helicopters! DANGER-Do not wear loose clothing or ties! DANGER-Keep well clear of rotating blades!
DANGER-Never fly near children or animals!
Always let the battery cool down before recharging.
Always recharge the battery after use, especially if it is going to be stored and not used for a while.
3
www�jperkinsdistribution�co�uk
TRANSMITTeR LAYOUT - MOde 2
Descend
Climb
IR Sender
LEFT STICK
Forwards
Backwards
Rotate
nose
right
Rotate nose left
RIGHT STICK
Charge
indicator
Power
indicator
Trim button for
nose Left or
nose Right
Frequency
selector A,B,C
Charge lead
Charge lead
cover
ON/OFF
Switch
INSTALL The bATTeRIeS IN The TRANSMITTeR
Remove the screw anticlockwise, then depress the tabs to remove the battery cover�
Install six good quality AA alkaline batteries, (purchased separately)� Make sure the “+” and “-” end of the batteries are correct as shown above�
+
-
++
+
+
+
- -
- - -
(Throttle stick)
IMPORTANT: To achieve the maximum flight times it is essential to use good quality
1.5V alkaline AA batteries in your transmitter.
Cheap batteries may look like a good option, but with poor quality batteries:
The helicopter may not charge at all The helicopter will take longer to charge Your flight times will be less The number of recharges will be minimal
Loading...
+ 5 hidden pages