Twin-Star International 23WM376 Instruction Manual
ATTENTION
IF YOU HAVE ANY PROBLEMS OR QUESTIONS, EMAIL
OR CALL CUSTOMER SERVICE BEFORE YOU RETURN
THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED.
For Customer Service: email: parts@twinstarhome.com
in English Call: 866-661-1218
in Spanish Call: 866-661-1218
in French Call: 866-374-9203
ATENCIÓN
SI TIENE ALGÚN PROBLEMA O PREGUNTAS,
ENVÍE UN MENSAJE DE CORREO ELECTRÓNICO O LLAME AL SERVICIO
DE ATENCIÓN AL CLIENTE ANTES DE DEVOLVER
ESTE PRODUCTO A LA TIENDA EN LA QUE LO COMPRÓ.
Servicio de atención al cliente: Correo electrónico: parts@twinstarhome.com
Línea para llamadas en inglés: 866-661-1218
Línea para llamadas en español: 866-661-1218
Línea para llamadas en francés: 866-374-9203
STOP
STOP
PARE
PARE
ATTENTION
SI VOUS AVEZ DES PROBLÈMES OU QUESTIONS,
ENVOYEZ UN COURRIEL AU SERVICE À LA CLIENTÈLE OU APPELEZ LE
SERVICE À LA CLIENTÈLE AVANT DE RETOURNER
CE PRODUIT OÙ VOUS L’AVEZ ACHETÉ.
Pour le service à la clientèle : courriel : parts@twinstarhome.com
pour le service en anglais, composez le 866-661-1218
pour le service en espagnol, composez le 866-661-1218
pour le service en français, composez le 866-374-9203
ARRET
ARRET
INSTRUCTION MANUAL ENCLOSED
MANUEL D’INSTRUCTION Á L’INTÉRIEUR
MANUAL DE INSTRUCCIONES ADJUNTO
INSTRUCTION MANUAL ENCLOSED
MANUEL D’INSTRUCTION Á L’INTÉRIEUR
MANUAL DE INSTRUCCIONES ADJUNTO
WOOD MANTEL ASSEMBLY INSTRUCTIONS
WOOD FIREPLACE MANTEL
23WM376
E-1
Part
Description
Quantity
PARTS
A
Hearth/Base
1
B
Left Assembly Panels
1
C
Right Assembly Panels
1
D
Center Shelf
1
E
Center Front Panel
1
F
Center Back Panel
1
G
Mantel/Top
1
H
Metal Connecter
HARDWARE
L
Bolt 1/4” x 1 1/4”
18
M
Washer
18
N
Wood Dowel
18
Q
SCREW
28
S
Insert Support Bar
4
1
PARTS LIST
E-mail: parts@twinstarhome.com
In English call: 866-661-1218
In French call: 866-374-9203
In Spanish call: 866-661-1218
For Customer Service:
DVD Mantel
Door With Mantel
PLEASE READ AND FOLLOW ALL SAFETY TIPS
For a complete tight fit every bolt
should have a flat washer. First slide a
flat washer onto the bolt. Your bolt is
now ready for use.
Now it is time to assemble your Fireplace.All
panels are labeled Left and Right as viewed
from the front of unit.
1. Locate the Left assembly Panels (B), insert one
Wood Dowel (N) into each of the pre-drilled
holes. Then use Bolts (L) and Washers (M)
through the pre-drilled holes in the mounting
blocks, attach the Left Assembly Panels (B) to
Hearth/Base (A).
E-2
GETTING STARTED
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all parts. Make sure
you do not discard the hardware.
HELPFUL HINTS
• Some steps are more easily handled with two adults.
• Attach the fireplace insert to the completed wood mantel last. INSTALL INSERT IN FROM THE
BACK OF THE FIREPLACE SO AS NOT TO SCRATCH THE HEARTH/BASE.
• Use care in assembling your new fireplace, take your time and use the hardware provided and a
quality Phillips head screwdriver. NEVER OVER TIGHTEN BOLTS.
CARE & CLEANING
1. Dust your fireplace regularly with a soft non-lint producing cloth or household dusting product.
2. You can clean your fireplace with a gentle non-abrasive household cleaner. Make sure to dry your
fireplace immediately with a soft cloth or towel.
Left Assembly
Panels
Hearth/Base
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer
Service: parts@twinstarhome.com or call 1-866-661-1218 in English, 1-866-374-9203 in French
or 1-866-661-1218 in Spanish. Please identify the parts you need and model number. Make sure
to include your name and address.
• Do not sit on top of the mantel.
A
B
N
N
L
M
Center Shelf
Right Assembly
Panel
Left
Assembly
Panel
Completed
Assembly
L
M
L
M
N
N
N
N
D
C
B
2. Insert one Wood Dowel (N) into each of the
pre-drilled holes, push the Center Shelf (D)
snug to the Left assembly Panels (B) and
connect the Right Assembly Panels (C),
make sure the Wood Dowels are seated in
the pre-drilled holes, using Bolts (L) and
Washers (M) through the pre-drilled holes
in the mounting blocks, then attach the Right
Assembly Panels (C) to Hearth/Base (A).
N
N
L
M
Mantel/Top
G
3. Locate Mantel/Top (G) and lay finish
side up on top of completed assembly
from step 2, from under the Mantel/Top
(G) attach the mantel, using Bolts (L) and
Washers (M) through the pre-drilled holes
in the mounting blocks.
H
Metal
Connecter
E-4
4. Connect the assembly panels to the top
and bottom. Using Screws (Q) through
the holes on the Metal Connecter (H).
5. Locate the Center Front Panel (E), attached
to the front of the completed assembly from
step 4. Using Bolts (L) and Washers (M)
through the pre-drilled holes.
If you are keeping DVD Mantel with this
fireplace. Please skip step 6, and follow
step 7 for installation.
Center Front Panel
L
M
L
M
L
M
E
E
Door With Mantel
Q
Screw
Completed
Assembly
Loading...