Twin-Star International 23MM378 Instruction Manual
ATTENTION
IF YOU HAVE ANY PROBLEMS OR QUESTIONS, EMAIL
OR CALL CUSTOMER SERVICE BEFORE YOU RETURN
THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED.
For Customer Service: email: www.twinstarhome.com
in English Call: 866-661-1218
in Spanish Call: 866-661-1218
in French Call: 866-374-9203
ATENCIÓN
SI TIENE ALGÚN PROBLEMA O PREGUNTAS,
ENVÍE UN MENSAJE DE CORREO ELECTRÓNICO O LLAME AL SERVICIO
DE ATENCIÓN AL CLIENTE ANTES DE DEVOLVER
ESTE PRODUCTO A LA TIENDA EN LA QUE LO COMPRÓ.
Servicio de atención al cliente: Correo electrónico: www.twinstarhome.com
Línea para llamadas en inglés: 866-661-1218
Línea para llamadas en español: 866-661-1218
Línea para llamadas en francés: 866-374-9203
STOP
STOP
PARE
PARE
ATTENTION
SI VOUS AVEZ DES PROBLÈMES OU QUESTIONS,
ENVOYEZ UN COURRIEL AU SERVICE À LA CLIENTÈLE OU APPELEZ LE
SERVICE À LA CLIENTÈLE AVANT DE RETOURNER
CE PRODUIT OÙ VOUS L’AVEZ ACHETÉ.
Pour le service à la clientèle : courriel : www.twinstarhome.com
pour le service en anglais, composez le 866-661-1218
pour le service en espagnol, composez le 866-661-1218
pour le service en français, composez le 866-374-9203
ARRÊT
ARRÊT
INSTRUCTION MANUAL ENCLOSED
MANUEL D’INSTRUCTION À L’INTÉRIEUR
MANUAL DE INSTRUCCIONES ADJUNTO
INSTRUCTION MANUAL ENCLOSED
MANUEL D’INSTRUCTION À L’INTÉRIEUR
MANUAL DE INSTRUCCIONES ADJUNTO
W O O D M A N T E L A S S E M B LY I N S T R U C T I O N S
WOOD FIREPLACE MANTEL
23MM378
E-1
Part Description Quantity
PARTS
HARDWARE
PARTS LIST
E-mail: www.twinstarhome.com
In English call: 866-661-1218
In French call: 866-374-9203
In Spanish call: 866-661-1218
For Customer Service:
A Hearth/Base
B Center Left Side Panel
C Center Right Side Panel
D Center Shelf
E Left Side Panel
F Right Side Panel
G Mantel/Top
H Wood Shelf
I Left Back Panel
J Left Front Door
K Right Front Door
P Right Back Panel
R Center Back Panel
S
Insert Support Bar
L Bolt 1/4 in. x 1-1/4 in. 22+1 extra
M Washer 1/4 22+1 extra
N Wood Dowel 24+1 extra
O Shelf Pin 8
Q Screw 38
V Knob (With Bolt) 2
Z Touch-Up Pen 1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
33445
P L E A S E R E A D A N D F O L L O W A L L S A F E T Y T I P S
1. Locate Hearth/Base (A) and set out
finished side
up on the floor.
2. Locate Center Left Side Panel (B), and insert one
Wood Dowel (N) into each of the pre-drilled
holes. Then use Bolts (L) and Washers (M)
through the pre-drilled holes in the mounting
blocks.
HAND TIGHTEN ONLY.
3. Locate Center Right Side Panel (C), and insert one
Wood Dowel (N) into each of the pre-drilled holes.
Then use Bolts (L) and Washers (M) through the
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
E-2
Center Right
Side Panel
Center Left
Side Panel
Hearth/Base
C
A
N
N
N
B
N
L
M
GETTING STARTED
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all parts. Make sure
you do not discard the hardware.
HELPFUL HINTS
• Some steps are more easily handled with two adults.
• Attach the fireplace insert to the completed wood mantel last. INSTALL INSERT IN FROM THE
BACK OF THE FIREPLACE SO AS NOT TO SCRATCH THE HEARTH/BASE.
• Use care in assembling your new fireplace, take your time and use the hardware provided and a
quality Phillips head screwdriver. NEVER OVER TIGHTEN BOLTS.
CARE & CLEANING
1. Dust your fireplace regularly with a soft non-lint producing cloth or household dusting product.
2. You can clean your fireplace with a gentle non-abrasive household cleaner. Make sure to dry your
fireplace immediately with a soft cloth or towel.
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer
Service: www.twinstarhome.com or call 1-866-661-1218 in English, 1-866-374-9203 in French
or 1-866-661-1218 in Spanish. Please identify the parts you need and model number. Make sure
to include your name and address.
• Do not sit on any part of the mantel.
CAUTION:
DO NOT MOVE MANTEL OR INSERT WHILE PLUGGED INTO POWER SUPPLY.
For a complete tight fit every bolt
should have a flat washer.
All panels are labeled Left and Right as viewed
from the front of unit.
6. Insert one Wood Dowel (N) into each of
pre-drilled holes.Push the Right Side
Panel (F) and Left Side Panel (E) snug to
completed assembly from step 5. Using
Bolts (L) and Washers (M) through the
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
Completed Assembly
Right
Side
Panel
Left
Side
Panel
N
N
N
M
M
M
N
N
N
L
L
L
E
F
4. Insert one Wood Dowel (N) into each of
the pre-drilled holes.
5. Then locate Center Shelf (D) and lay
finished side up on top of completed
assembly from step 3. From the inside,
attach the Center Shelf using Bolts (L)
and Washers (M) through the pre-drilled
holes in the mounting blocks.
HAND TIGHTEN ONLY .
Center Shelf
D
B
C
N
N
N
N
N
N
M
L
7. Insert one Wood Dowel(N) into each of
the pre-drilled holes on the top edges of
the Assembly from step 6.Then locate
Mantel/Top (G) and lay finished side up
on top of completed assembly.From the
inside,attach the Mantel using Bolts (L)
and Washers (M) through the pre-drilled
holes in the mounting blocks.
HAND TIGHTEN ONLY.
8. Using Phillips head screwdriver tighten all
Bolts alternating top and bottom, left and
right.
E-4
Mantel/Top
M
L
N
N
N
N
G
Screw
Q
R
R
Left
Back
Completed Assembly
Panel
Right
Back
Panel
P
I
Center Back Panel
9. Locate Left Back Panel (I), Right Back
Panel (P) and Center Back Panel (R),
attach to the back of the completed
assembly from step 8. Use a Phillips
Head screw driver, tighten screws (Q)
through the pre-drilled holes in the Back
Panels to the completed assembly.
Attach the Knob (V) to the Left Front
Door (J) and Right Front Door (K), use
the bolts attached through the pre-drilled
holes in the doors. Then use a Phillips
Head Screwdriver to tighten the bolts.
Remove Shelf Pin (O) from bag. Choose
desired height of Shelf (H) and place the
four Shelf Pin (O) into same height shelf
holes inside side Panels. Insert Wood
Shelf (H), Allow Wood Shelf (H) to rest
on the Shelf Pin (O)
E-5
10. Locate Right Front Door (K) and Left Front
Door (J). Slide door hinge keyhole into
panel hinge bracket. (Diagram 1)
Use Phillips Head Screwdriver to tighten
screws. (Diagram 2)
TO ADJUST HINGES
To adjust door forward or backward change
keyhole slot position.
(As Shown In Diagram 3a)
To adjust door right or left loosen/tighten
screw. (As Shown In Diagram 3b)
To adjust door up or down adjust bracket
height. (As Shown In Diagram 3c)
1 2 3
J
J
K
K
Left
Front
Door
Right
Front
Door
3a
3b
3c
O
H
Wood Shelf
V
Shelf
Pin
Knob
(With Bolt)
11.
Loading...