Twin-Star International 23DM871 Instruction Manual
ATTENTION
IF YOU HAVE ANY PROBLEMS OR QUESTIONS, EMAIL
OR CALL CUSTOMER SERVICE BEFORE YOU RETURN
THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED.
For Customer Service: email: parts@twinstarhome.com
in English Call: 866-661-1218
in Spanish Call: 866-661-1218
in French Call: 866-374-9203
ATENCIÓN
SI TIENE ALGÚN PROBLEMA O PREGUNTAS,
ENVÍE UN MENSAJE DE CORREO ELECTRÓNICO O LLAME AL SERVICIO
DE ATENCIÓN AL CLIENTE ANTES DE DEVOLVER
ESTE PRODUCTO A LA TIENDA EN LA QUE LO COMPRÓ.
Servicio de atención al cliente: Correo electrónico: parts@twinstarhome.com
Línea para llamadas en inglés: 866-661-1218
Línea para llamadas en español: 866-661-1218
Línea para llamadas en francés: 866-374-9203
STOP
STOP
PARE
PARE
ATTENTION
SI VOUS AVEZ DES PROBLÈMES OU QUESTIONS,
ENVOYEZ UN COURRIEL AU SERVICE À LA CLIENTÈLE OU APPELEZ LE
SERVICE À LA CLIENTÈLE AVANT DE RETOURNER
CE PRODUIT OÙ VOUS L’AVEZ ACHETÉ.
Pour le service à la clientèle : courriel : parts@twinstarhome.com
pour le service en anglais, composez le 866-661-1218
pour le service en espagnol, composez le 866-661-1218
pour le service en français, composez le 866-374-9203
ARRÊT
ARRÊT
INSTRUCTION MANUAL ENCLOSED
MANUEL D’INSTRUCTION À L’INTÉRIEUR
MANUAL DE INSTRUCCIONES ADJUNTO
INSTRUCTION MANUAL ENCLOSED
MANUEL D’INSTRUCTION À L’INTÉRIEUR
MANUAL DE INSTRUCCIONES ADJUNTO
E-1
WOOD FIREPLACE MANTEL
WOOD MANTEL ASSEMBLY INSTRUCTIONS
23DM871
ATTENTION
For Customer Service:
ALSO Requires-Electric
Fireplace Insert with Heater
E-mail: parts@twinstarhome.com
In English call: 866-661-1218
In French call: 866-374-9203
In Spanish call: 866-661-1218
Twin-Star International, Inc.
Delray Beach, FL 33445
Made in China
Printed in China
Wall Mantel Corner Mantel
PARTS LIST
PART DESCRIPTION QUANTITY
PARTS
Hearth/Base
Center Left Front Panel
Center Right Front Panel
Center Front Panel
Left Side Panel
Right Side Panel
Mantel/Top
Center T op Panel
Left Front Panel
Right Front Panel
"L" corner brace
Top corner extension
HARDWARE
Camlock (U-1,U-2)
Wood Dowel
Screw
Screw
Touch-Up Pen
A
B
C
D
E
F
G
H
I
J
Q
P
U
N
Y1
Y2
Z
1
1
1
1
1
1
1
1
1
1
1
1
22+1 extra
32+1 extra
6+1 extra
11+1 extra
1
E-2
PLEASE READ AND FOLLOW ALL SAFETY TIPS
GETTING STARTED
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all parts. Make sure you do
not discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer Service:
parts@twinstarhome.com or call 1-866-661-1218 in English, 1-866-374-9203 in French or
1-866-661-1218 in Spanish. Please identify the parts you need and model number. Make sure to include
your name and address.
CAUTION:
DO NOT MOVE MANTEL OR INSERT WHILE PLUGGED INTO POWER SUPPLY.
HELPFUL HINTS
• Some steps are more easily handled with two adults.
• Attach the fi replace insert to the completed wood mantel last. INSTALL INSERT IN FROM THE BACK
OF THE FIREPLACE SO AS NOT TO SCRATCH THE HEARTH/BASE.
• Use care in assembling your new fi replace, take your time and use the hardware provided and a quality
Phillips head screwdriver. NEVER OVER TIGHTEN BOLTS.
• Do not sit on any part of the mantel.
CARE & CLEANING
1. Dust your fi replace regularly with a soft non-lint producing cloth or household dusting product.
2. You can clean your fi replace with a gentle non-abrasive household cleaner. Make sure to dry your
fi replace immediately with a soft cloth or towel.
Now it is time to assemble your Fireplace.
All panels are labeled Left and Right as
viewed from the front of unit.
To avoid scratching the finish of
your new mantel place all parts on a
scratch free surface such as a rug or
carpet.
Camlock installation.
For correct installation, screw U-1 must be
inserted and tightened in the pre-drilled hole.
Camlock U-2 must be inserted into the
pre-drilled hole with the cross positioned in the
direction of screw U-1.
E-3
1. Locate the Left Front Panel (I), Left Side Panel
(E). Insert Wood Dowel (N) and screw (U-1)
into the holes in the Left Front Panel, make
sure to tighten (U-1). Push Left Front Panel (I)
snug to the Left Side Panel (E). Use a Phillips
head screwdriver to tighten (U-2).
Repeat with Right Front Panel (J) and
Right Side Panel (F).
2. Insert Wood Dowel (N) and screw (U-1) into
the holes in the Left/Right Front Panel (I, J),
make sure to tighten (U-1). Push the completed
assembly from step 1 snug to the Center Top
Panel (H). Use a Phillips head screwdriver to
tighten (U-2).
Left
Side
Panel
Left
Front
Panel
Right
Side
Panel
Center Top Panel
Right
Front
Panel
U-2
U-1
F
E
F
H
IJ
E
N
U-2
U-1
N
N
N
N
N
E-4
N
N
U-2
U-1
3. Insert wood dowel (N) into the holes in the
Hearth/Base (A). Push the completed assembly
from step 2 snug to the hearth/base as shown
in diagram. Use a Phillips head screwdriver to
tighten screws (Y1) through the pre-drilled
holes in the Hearth/Base (A).
4. Locate the Center Left Front Panel (B), Center
Right Front Panel (C), Center Front Panel (D).
Insert Wood Dowel (N) and Screw (U-1) into
the holes in the front panels, make sure to
tighten (U-1). Push Center Left Front Panel
(B) and Center Right Front Panel (C) snug to
the Center Front Panel (D). Use a Phillips head
screwdriver to tighten (U-2).
A
Y1
Hearh/Base
Center
Left
Front
Panel
Center Front Panel
Center
Right
Front
Panel
B
C
D
Loading...